[PATCH v12 2/4] riscv: Include riscv_set_icache_flush_ctx prctl
Charlie Jenkins
charlie at rivosinc.com
Tue Mar 12 14:12:16 PDT 2024
On Tue, Mar 12, 2024 at 03:11:57PM -0500, Samuel Holland wrote:
> On 2024-03-12 2:47 PM, Charlie Jenkins wrote:
> > Support new prctl with key PR_RISCV_SET_ICACHE_FLUSH_CTX to enable
> > optimization of cross modifying code. This prctl enables userspace code
> > to use icache flushing instructions such as fence.i with the guarantee
> > that the icache will continue to be clean after thread migration.
> >
> > Signed-off-by: Charlie Jenkins <charlie at rivosinc.com>
> > Reviewed-by: Atish Patra <atishp at rivosinc.com>
> > Reviewed-by: Alexandre Ghiti <alexghiti at rivosinc.com>
> > ---
> > arch/riscv/include/asm/mmu.h | 2 +
> > arch/riscv/include/asm/processor.h | 10 ++++
> > arch/riscv/include/asm/switch_to.h | 23 ++++++++++
> > arch/riscv/mm/cacheflush.c | 94 ++++++++++++++++++++++++++++++++++++++
> > arch/riscv/mm/context.c | 17 +++++--
> > include/uapi/linux/prctl.h | 6 +++
> > kernel/sys.c | 6 +++
> > 7 files changed, 153 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/riscv/include/asm/mmu.h b/arch/riscv/include/asm/mmu.h
> > index 355504b37f8e..60be458e94da 100644
> > --- a/arch/riscv/include/asm/mmu.h
> > +++ b/arch/riscv/include/asm/mmu.h
> > @@ -19,6 +19,8 @@ typedef struct {
> > #ifdef CONFIG_SMP
> > /* A local icache flush is needed before user execution can resume. */
> > cpumask_t icache_stale_mask;
> > + /* Force local icache flush on all migrations. */
> > + bool force_icache_flush;
> > #endif
> > #ifdef CONFIG_BINFMT_ELF_FDPIC
> > unsigned long exec_fdpic_loadmap;
> > diff --git a/arch/riscv/include/asm/processor.h b/arch/riscv/include/asm/processor.h
> > index a8509cc31ab2..cca62013c3c0 100644
> > --- a/arch/riscv/include/asm/processor.h
> > +++ b/arch/riscv/include/asm/processor.h
> > @@ -69,6 +69,7 @@
> > #endif
> >
> > #ifndef __ASSEMBLY__
> > +#include <linux/cpumask.h>
> >
> > struct task_struct;
> > struct pt_regs;
> > @@ -123,6 +124,12 @@ struct thread_struct {
> > struct __riscv_v_ext_state vstate;
> > unsigned long align_ctl;
> > struct __riscv_v_ext_state kernel_vstate;
> > +#ifdef CONFIG_SMP
> > + /* Flush the icache on migration */
> > + bool force_icache_flush;
> > + /* A forced icache flush is not needed if migrating to the previous cpu. */
> > + unsigned int prev_cpu;
> > +#endif
> > };
> >
> > /* Whitelist the fstate from the task_struct for hardened usercopy */
> > @@ -184,6 +191,9 @@ extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val);
> > #define GET_UNALIGN_CTL(tsk, addr) get_unalign_ctl((tsk), (addr))
> > #define SET_UNALIGN_CTL(tsk, val) set_unalign_ctl((tsk), (val))
> >
> > +#define RISCV_SET_ICACHE_FLUSH_CTX(arg1, arg2) riscv_set_icache_flush_ctx(arg1, arg2)
> > +extern int riscv_set_icache_flush_ctx(unsigned long ctx, unsigned long per_thread);
> > +
> > #endif /* __ASSEMBLY__ */
> >
> > #endif /* _ASM_RISCV_PROCESSOR_H */
> > diff --git a/arch/riscv/include/asm/switch_to.h b/arch/riscv/include/asm/switch_to.h
> > index 7efdb0584d47..7594df37cc9f 100644
> > --- a/arch/riscv/include/asm/switch_to.h
> > +++ b/arch/riscv/include/asm/switch_to.h
> > @@ -8,6 +8,7 @@
> >
> > #include <linux/jump_label.h>
> > #include <linux/sched/task_stack.h>
> > +#include <linux/mm_types.h>
> > #include <asm/vector.h>
> > #include <asm/cpufeature.h>
> > #include <asm/processor.h>
> > @@ -72,14 +73,36 @@ static __always_inline bool has_fpu(void) { return false; }
> > extern struct task_struct *__switch_to(struct task_struct *,
> > struct task_struct *);
> >
> > +static inline bool switch_to_should_flush_icache(struct task_struct *task)
> > +{
> > +#ifdef CONFIG_SMP
> > + bool stale_mm = task->mm && task->mm->context.force_icache_flush;
> > + bool stale_thread = task->thread.force_icache_flush;
> > + bool thread_migrated = smp_processor_id() != task->thread.prev_cpu;
> > +
> > + return thread_migrated && (stale_mm || stale_thread);
> > +#else
> > + return false;
> > +#endif
> > +}
> > +
> > +#ifdef CONFIG_SMP
> > +#define __set_prev_cpu(thread) ((thread).prev_cpu = smp_processor_id())
> > +#else
> > +#define __set_prev_cpu(thread)
> > +#endif
> > +
> > #define switch_to(prev, next, last) \
> > do { \
> > struct task_struct *__prev = (prev); \
> > struct task_struct *__next = (next); \
> > + __set_prev_cpu(__prev->thread); \
> > if (has_fpu()) \
> > __switch_to_fpu(__prev, __next); \
> > if (has_vector()) \
> > __switch_to_vector(__prev, __next); \
> > + if (switch_to_should_flush_icache(__next)) \
> > + local_flush_icache_all(); \
> > ((last) = __switch_to(__prev, __next)); \
> > } while (0)
> >
> > diff --git a/arch/riscv/mm/cacheflush.c b/arch/riscv/mm/cacheflush.c
> > index 55a34f2020a8..329b95529580 100644
> > --- a/arch/riscv/mm/cacheflush.c
> > +++ b/arch/riscv/mm/cacheflush.c
> > @@ -5,6 +5,7 @@
> >
> > #include <linux/acpi.h>
> > #include <linux/of.h>
> > +#include <linux/prctl.h>
> > #include <asm/acpi.h>
> > #include <asm/cacheflush.h>
> >
> > @@ -152,3 +153,96 @@ void __init riscv_init_cbo_blocksizes(void)
> > if (cboz_block_size)
> > riscv_cboz_block_size = cboz_block_size;
> > }
> > +
> > +/**
> > + * riscv_set_icache_flush_ctx() - Enable/disable icache flushing instructions in
> > + * userspace.
> > + * @ctx: Set the type of icache flushing instructions permitted/prohibited in
> > + * userspace. Supported values described below.
> > + *
> > + * Supported values for ctx:
> > + *
> > + * * %PR_RISCV_CTX_SW_FENCEI_ON: Allow fence.i in user space.
> > + *
> > + * * %PR_RISCV_CTX_SW_FENCEI_OFF: Disallow fence.i in user space. All threads in
> > + * a process will be affected when ``scope == PR_RISCV_SCOPE_PER_PROCESS``.
> > + * Therefore, caution must be taken; use this flag only when you can guarantee
> > + * that no thread in the process will emit fence.i from this point onward.
> > + *
> > + * @scope: Set scope of where icache flushing instructions are allowed to be
> > + * emitted. Supported values described below.
> > + *
> > + * Supported values for scope:
> > + *
> > + * * %PR_RISCV_SCOPE_PER_PROCESS: Ensure the icache of any thread in this process
> > + * is coherent with instruction storage upon
> > + * migration.
> > + *
> > + * * %PR_RISCV_SCOPE_PER_THREAD: Ensure the icache of the current thread is
> > + * coherent with instruction storage upon
> > + * migration.
> > + *
> > + * When ``scope == PR_RISCV_SCOPE_PER_PROCESS``, all threads in the process are
> > + * permitted to emit icache flushing instructions. Whenever any thread in the
> > + * process is migrated, the corresponding hart's icache will be guaranteed to be
> > + * consistent with instruction storage. This does not enforce any guarantees
> > + * outside of migration. If a thread modifies an instruction that another thread
> > + * may attempt to execute, the other thread must still emit an icache flushing
> > + * instruction before attempting to execute the potentially modified
> > + * instruction. This must be performed by the user-space program.
> > + *
> > + * In per-thread context (eg. ``scope == PR_RISCV_SCOPE_PER_THREAD``) only the
> > + * thread calling this function is permitted to emit icache flushing
> > + * instructions. When the thread is migrated, the corresponding hart's icache
> > + * will be guaranteed to be consistent with instruction storage.
> > + *
> > + * On kernels configured without SMP, this function is a nop as migrations
> > + * across harts will not occur.
> > + */
> > +int riscv_set_icache_flush_ctx(unsigned long ctx, unsigned long scope)
> > +{
> > +#ifdef CONFIG_SMP
> > + switch (ctx) {
> > + case PR_RISCV_CTX_SW_FENCEI_ON:
> > + switch (scope) {
> > + case PR_RISCV_SCOPE_PER_PROCESS:
> > + current->mm->context.force_icache_flush = true;
> > + break;
> > + case PR_RISCV_SCOPE_PER_THREAD:
> > + current->thread.force_icache_flush = true;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > + break;
> > + case PR_RISCV_CTX_SW_FENCEI_OFF:
> > + switch (scope) {
> > + case PR_RISCV_SCOPE_PER_PROCESS:
> > + case PR_RISCV_SCOPE_PER_THREAD:
> > + bool stale_cpu;
> > + cpumask_t *mask;
> > +
> > + current->mm->context.force_icache_flush = false;
>
> You still need (at least partially) separate logic for the two scopes, because
> now you're resetting the wrong flag here.
Yes that was hasty of me, thank you.
>
> > +
> > + /*
> > + * Mark every other hart's icache as needing a flush for
> > + * this MM. Maintain the previous value of the current
> > + * cpu to handle the case when this function is called
> > + * concurrently on different harts.
> > + */
> > + mask = ¤t->mm->context.icache_stale_mask;
> > + stale_cpu = cpumask_test_cpu(smp_processor_id(), mask);
> > +
> > + cpumask_setall(mask);
> > + assign_bit(cpumask_check(smp_processor_id()), cpumask_bits(mask), stale_cpu);
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +#endif
> > + return 0;
>
> I think I brought this up a couple of revisions ago (sorry for not mentioning it
> the last time), but you still need parameter validation for CONFIG_SMP=n. Yes,
> the call is currently a no-op for the combinations of ctx and scope defined so
> far, but if we ever add a new ctx (say, something for Zjid), it may need to do
> something on CONFIG_SMP=n, and older kernels will need to indicate that the new
> ctx is not supported.
Ah, I must not have understood, I will add that.
>
> > +}
> > diff --git a/arch/riscv/mm/context.c b/arch/riscv/mm/context.c
> > index 217fd4de6134..3e27e5c8c3c6 100644
> > --- a/arch/riscv/mm/context.c
> > +++ b/arch/riscv/mm/context.c
> > @@ -15,6 +15,7 @@
> > #include <asm/tlbflush.h>
> > #include <asm/cacheflush.h>
> > #include <asm/mmu_context.h>
> > +#include <asm/switch_to.h>
> >
> > #ifdef CONFIG_MMU
> >
> > @@ -297,21 +298,27 @@ static inline void set_mm(struct mm_struct *prev,
> > *
> > * The "cpu" argument must be the current local CPU number.
> > */
> > -static inline void flush_icache_deferred(struct mm_struct *mm, unsigned int cpu)
> > +static inline void flush_icache_deferred(struct mm_struct *mm, unsigned int cpu,
> > + struct task_struct *task)
> > {
> > #ifdef CONFIG_SMP
> > cpumask_t *mask = &mm->context.icache_stale_mask;
> >
> > - if (cpumask_test_cpu(cpu, mask)) {
> > + if (cpumask_test_and_clear_cpu(cpu, mask)) {
> > cpumask_clear_cpu(cpu, mask);
>
> Now that you only have one mask, this is clearing the same bit twice.
Thanks for pointing that out!
- Charlie
>
> Regards,
> Samuel
>
> > +
> > /*
> > * Ensure the remote hart's writes are visible to this hart.
> > * This pairs with a barrier in flush_icache_mm.
> > */
> > smp_mb();
> > - local_flush_icache_all();
> > - }
> >
> > + /*
> > + * If cache will be flushed in switch_to, no need to flush here.
> > + */
> > + if (!(task && switch_to_should_flush_icache(task)))
> > + local_flush_icache_all();
> > + }
> > #endif
> > }
> >
> > @@ -332,5 +339,5 @@ void switch_mm(struct mm_struct *prev, struct mm_struct *next,
> >
> > set_mm(prev, next, cpu);
> >
> > - flush_icache_deferred(next, cpu);
> > + flush_icache_deferred(next, cpu, task);
> > }
> > diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
> > index 370ed14b1ae0..524d546d697b 100644
> > --- a/include/uapi/linux/prctl.h
> > +++ b/include/uapi/linux/prctl.h
> > @@ -306,4 +306,10 @@ struct prctl_mm_map {
> > # define PR_RISCV_V_VSTATE_CTRL_NEXT_MASK 0xc
> > # define PR_RISCV_V_VSTATE_CTRL_MASK 0x1f
> >
> > +#define PR_RISCV_SET_ICACHE_FLUSH_CTX 71
> > +# define PR_RISCV_CTX_SW_FENCEI_ON 0
> > +# define PR_RISCV_CTX_SW_FENCEI_OFF 1
> > +# define PR_RISCV_SCOPE_PER_PROCESS 0
> > +# define PR_RISCV_SCOPE_PER_THREAD 1
> > +
> > #endif /* _LINUX_PRCTL_H */
> > diff --git a/kernel/sys.c b/kernel/sys.c
> > index e219fcfa112d..69afdd8b430f 100644
> > --- a/kernel/sys.c
> > +++ b/kernel/sys.c
> > @@ -146,6 +146,9 @@
> > #ifndef RISCV_V_GET_CONTROL
> > # define RISCV_V_GET_CONTROL() (-EINVAL)
> > #endif
> > +#ifndef RISCV_SET_ICACHE_FLUSH_CTX
> > +# define RISCV_SET_ICACHE_FLUSH_CTX(a, b) (-EINVAL)
> > +#endif
> >
> > /*
> > * this is where the system-wide overflow UID and GID are defined, for
> > @@ -2743,6 +2746,9 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
> > case PR_RISCV_V_GET_CONTROL:
> > error = RISCV_V_GET_CONTROL();
> > break;
> > + case PR_RISCV_SET_ICACHE_FLUSH_CTX:
> > + error = RISCV_SET_ICACHE_FLUSH_CTX(arg2, arg3);
> > + break;
> > default:
> > error = -EINVAL;
> > break;
> >
>
More information about the linux-riscv
mailing list