[PATCH 0/4] Add ACPI NUMA support for RISC-V

Haibo Xu xiaobo55x at gmail.com
Mon Mar 4 18:30:45 PST 2024


Hi Sunil,

Could you help review this patch set?

Thanks,
Haibo

On Wed, Jan 31, 2024 at 10:18 AM Haibo Xu <haibo1.xu at intel.com> wrote:
>
> This patch series enable RISC-V ACPI NUMA support which was based on
> the recently approved ACPI ECR[1].
>
> Patch 1/4 is generated from the acpica PR[2] and should be merged through
> the acpica project. Due to this dependency, other 3 patches can only be
> merged after the corresponding ACPICA patch was pulled into linux.
>
> Patch 2/4 add the common SRAT RINTC affinity structure handler.
> Patch 3/4 add RISC-V specific acpi_numa.c file to parse NUMA information
> from SRAT and SLIT ACPI tables.
> Patch 4/4 add corresponding ACPI_NUMA config for RISC-V Kconfig.
>
> Based-on: https://github.com/linux-riscv/linux-riscv/tree/for-next
>
> [1] https://mantis.uefi.org/mantis/view.php?id=2433
> [2] https://github.com/acpica/acpica/pull/926
>
> Testing:
> Since the ACPI AIA/PLIC support patch set is still under upstream review,
> hence it is tested using the poll based HVC SBI console and RAM disk.
> 1) Build latest Qemu with the following patch backported
>    https://lore.kernel.org/all/20240129094200.3581037-1-haibo1.xu@intel.com/
>    https://github.com/vlsunil/qemu/commit/42bd4eeefd5d4410a68f02d54fee406d8a1269b0
>
> 2) Build latest EDK-II
>    https://github.com/tianocore/edk2/blob/master/OvmfPkg/RiscVVirt/README.md
>
> 3) Build Linux with the following configs enabled
>    CONFIG_RISCV_SBI_V01=y
>    CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
>    CONFIG_HVC_RISCV_SBI=y
>
> 4) Build buildroot rootfs.cpio
>
> 5) Launch the Qemu machine
>    qemu-system-riscv64 -nographic \
>    -machine virt,pflash0=pflash0,pflash1=pflash1 -smp 4 -m 8G \
>    -blockdev node-name=pflash0,driver=file,read-only=on,filename=RISCV_VIRT_CODE.fd \
>    -blockdev node-name=pflash1,driver=file,filename=RISCV_VIRT_VARS.fd \
>    -object memory-backend-ram,size=4G,id=m0 \
>    -object memory-backend-ram,size=4G,id=m1 \
>    -numa node,memdev=m0,cpus=0-1,nodeid=0 \
>    -numa node,memdev=m1,cpus=2-3,nodeid=1 \
>    -numa dist,src=0,dst=1,val=30 \
>    -kernel linux/arch/riscv/boot/Image \
>    -initrd buildroot/output/images/rootfs.cpio \
>    -append "root=/dev/ram ro console=hvc0 earlycon=sbi"
>
> [    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x80000000-0x17fffffff]
> [    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x180000000-0x27fffffff]
> [    0.000000] NUMA: NODE_DATA [mem 0x17fe3bc40-0x17fe3cfff]
> [    0.000000] NUMA: NODE_DATA [mem 0x27fff4c40-0x27fff5fff]
> ...
> [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x0 -> Node 0
> [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x1 -> Node 0
> [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x2 -> Node 1
> [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x3 -> Node 1
>
> Haibo Xu (4):
>   ACPICA: SRAT: Add RISC-V RINTC affinity structure
>   ACPI: NUMA: Add handler for SRAT RINTC affinity structure
>   ACPI: RISCV: Add NUMA support based on SRAT and SLIT
>   ACPI: RISCV: Enable ACPI based NUMA
>
>  arch/riscv/Kconfig            |   1 +
>  arch/riscv/include/asm/acpi.h |  15 +++-
>  arch/riscv/kernel/Makefile    |   1 +
>  arch/riscv/kernel/acpi.c      |   5 --
>  arch/riscv/kernel/acpi_numa.c | 133 ++++++++++++++++++++++++++++++++++
>  arch/riscv/kernel/setup.c     |   4 +-
>  arch/riscv/kernel/smpboot.c   |   2 -
>  drivers/acpi/numa/Kconfig     |   2 +-
>  drivers/acpi/numa/srat.c      |  35 ++++++++-
>  include/acpi/actbl3.h         |  18 ++++-
>  include/linux/acpi.h          |   7 ++
>  11 files changed, 209 insertions(+), 14 deletions(-)
>  create mode 100644 arch/riscv/kernel/acpi_numa.c
>
> --
> 2.34.1
>



More information about the linux-riscv mailing list