[PATCH v2 00/10] riscv: add initial support for SpacemiT K1

[Yixun Lan]

SpacemiT K1 is an ideal chip for some new extension such as RISC-V Vector
1.0 and Zicond evaluation now. Add initial support for it to allow more
people to participate in building drivers to mainline for it.

This kernel has been tested upon Banana Pi BPI-F3 board on vendor U-Boot
bootflow generated by Armbian SDK[1] and patched OpenSBI[2] to enable
Zicboz, which does not in the vendor dts on its U-Boot. Then successfully
booted to busybox on initrd with this log[3].

As previous discussion in patch v1[4], maintainer expect more basic drivers
ready before really merging it, which would be fine. For other follow-up patches, 
that are clk, pinctrl/gpio, reset.. My current goal would target at a headless
system including SD card, emmc, and ethernet.

P.S: talked to Yangyu, I will help and take care of this patch series, thanks
---
Changes in v2:
 - fix timebase-frequency according to current setting
 - add other uart dt nodes, fix input frequency
 - introduce new uart compatible for K1 SoC
 - add 'k1' prefix to bananapi-f3.dts
 - fix k1-clint compatible
 - fix some typos
 - Link to v1: https://lore.kernel.org/r/tencent_BC64B7B1876F5D10479BD19112F73F262505@qq.com

Link: https://github.com/BPI-SINOVOIP/armbian-build/tree/v24.04.30 [1]
Link: https://gist.github.com/cyyself/a07096e6e99c949ed13f8fa16d884402 [2]
Link: https://gist.github.com/cyyself/a2201c01f5c8955a119641f97b7d0280 [3]
Link: https://lore.kernel.org/r/20240618-hardwood-footrest-ab5ec5bce3cf@wendy [4]

To: Rob Herring <robh at kernel.org>
To: Krzysztof Kozlowski <krzk+dt at kernel.org>
To: Conor Dooley <conor+dt at kernel.org>
To: Conor Dooley <conor at kernel.org>
To: Paul Walmsley <paul.walmsley at sifive.com>
To: Palmer Dabbelt <palmer at dabbelt.com>
To: Albert Ou <aou at eecs.berkeley.edu>
To: Daniel Lezcano <daniel.lezcano at linaro.org>
To: Thomas Gleixner <tglx at linutronix.de>
To: Samuel Holland <samuel.holland at sifive.com>
To: Anup Patel <anup at brainfault.org>
To: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
To: Jiri Slaby <jirislaby at kernel.org>
To: Lubomir Rintel <lkundrak at v3.sk>
Cc: devicetree at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: Palmer Dabbelt <palmer at sifive.com>
Cc: linux-riscv at lists.infradead.org
Cc: linux-serial at vger.kernel.org
Cc: Inochi Amaoto <inochiama at outlook.com>
Cc: Meng Zhang <zhangmeng.kevin at spacemit.com>

Signed-off-by: Yangyu Chen <cyy at cyyself.name>
Signed-off-by: Yixun Lan <dlan at gentoo.org>

---
Yangyu Chen (9):
      dt-bindings: vendor-prefixes: add spacemit
      dt-bindings: riscv: Add SpacemiT X60 compatibles
      dt-bindings: riscv: add SpacemiT K1 bindings
      dt-bindings: timer: Add SpacemiT K1 CLINT
      dt-bindings: interrupt-controller: Add SpacemiT K1 PLIC
      riscv: add SpacemiT SOC family Kconfig support
      riscv: dts: add initial SpacemiT K1 SoC device tree
      riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree
      riscv: defconfig: enable SpacemiT SoC

Yixun Lan (1):
      dt-bindings: serial: 8250: Add SpacemiT K1 uart compatible

 .../interrupt-controller/sifive,plic-1.0.0.yaml    |   5 +-
 Documentation/devicetree/bindings/riscv/cpus.yaml  |   1 +
 .../devicetree/bindings/riscv/spacemit.yaml        |  24 ++
 Documentation/devicetree/bindings/serial/8250.yaml |   4 +-
 .../devicetree/bindings/timer/sifive,clint.yaml    |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 arch/riscv/Kconfig.socs                            |   5 +
 arch/riscv/boot/dts/Makefile                       |   1 +
 arch/riscv/boot/dts/spacemit/Makefile              |   2 +
 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts    |  19 ++
 arch/riscv/boot/dts/spacemit/k1.dtsi               | 378 +++++++++++++++++++++
 arch/riscv/configs/defconfig                       |   1 +
 12 files changed, 441 insertions(+), 2 deletions(-)
---
base-commit: f2661062f16b2de5d7b6a5c42a9a5c96326b8454
change-id: 20240626-k1-01-basic-dt-1aa31eeebcd2

Best regards,
-- 
Yixun Lan <dlan at gentoo.org>