[PATCH v5] riscv: entry: set a0 = -ENOSYS only when syscall != -1
Björn Töpel
bjorn at rivosinc.com
Thu Jun 27 03:23:39 PDT 2024
On Thu, Jun 27, 2024 at 11:52 AM Dmitry V. Levin <ldv at strace.io> wrote:
>
> On Thu, Jun 27, 2024 at 11:43:03AM +0200, Björn Töpel wrote:
> > On Thu, Jun 27, 2024 at 9:47 AM Celeste Liu <coelacanthushex at gmail.com> wrote:
> > > On 2024-06-27 15:14, Dmitry V. Levin wrote:
> > >
> > > > Hi,
> > > >
> > > > On Tue, Aug 01, 2023 at 10:15:16PM +0800, Celeste Liu wrote:
> > > >> When we test seccomp with 6.4 kernel, we found errno has wrong value.
> > > >> If we deny NETLINK_AUDIT with EAFNOSUPPORT, after f0bddf50586d, we will
> > > >> get ENOSYS instead. We got same result with commit 9c2598d43510 ("riscv:
> > > >> entry: Save a0 prior syscall_enter_from_user_mode()").
> > > >>
> > > >> After analysing code, we think that regs->a0 = -ENOSYS should only be
> > > >> executed when syscall != -1. In __seccomp_filter, when seccomp rejected
> > > >> this syscall with specified errno, they will set a0 to return number as
> > > >> syscall ABI, and then return -1. This return number is finally pass as
> > > >> return number of syscall_enter_from_user_mode, and then is compared with
> > > >> NR_syscalls after converted to ulong (so it will be ULONG_MAX). The
> > > >> condition syscall < NR_syscalls will always be false, so regs->a0 = -ENOSYS
> > > >> is always executed. It covered a0 set by seccomp, so we always get
> > > >> ENOSYS when match seccomp RET_ERRNO rule.
> > > >>
> > > >> Fixes: f0bddf50586d ("riscv: entry: Convert to generic entry")
> > > >> Reported-by: Felix Yan <felixonmars at archlinux.org>
> > > >> Co-developed-by: Ruizhe Pan <c141028 at gmail.com>
> > > >> Signed-off-by: Ruizhe Pan <c141028 at gmail.com>
> > > >> Co-developed-by: Shiqi Zhang <shiqi at isrc.iscas.ac.cn>
> > > >> Signed-off-by: Shiqi Zhang <shiqi at isrc.iscas.ac.cn>
> > > >> Signed-off-by: Celeste Liu <CoelacanthusHex at gmail.com>
> > > >> Tested-by: Felix Yan <felixonmars at archlinux.org>
> > > >> Tested-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>
> > > >> Reviewed-by: Björn Töpel <bjorn at rivosinc.com>
> > > >> Reviewed-by: Guo Ren <guoren at kernel.org>
> > > >> ---
> > > >>
> > > >> v4 -> v5: add Tested-by Emil Renner Berthing <emil.renner.berthing at canonical.com>
> > > >> v3 -> v4: use long instead of ulong to reduce type cast and avoid
> > > >> implementation-defined behavior, and make the judgment of syscall
> > > >> invalid more explicit
> > > >> v2 -> v3: use if-statement instead of set default value,
> > > >> clarify the type of syscall
> > > >> v1 -> v2: added explanation on why always got ENOSYS
> > > >>
> > > >> arch/riscv/kernel/traps.c | 6 +++---
> > > >> 1 file changed, 3 insertions(+), 3 deletions(-)
> > > >>
> > > >> diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
> > > >> index f910dfccbf5d2..729f79c97e2bf 100644
> > > >> --- a/arch/riscv/kernel/traps.c
> > > >> +++ b/arch/riscv/kernel/traps.c
> > > >> @@ -297,7 +297,7 @@ asmlinkage __visible __trap_section void do_trap_break(struct pt_regs *regs)
> > > >> asmlinkage __visible __trap_section void do_trap_ecall_u(struct pt_regs *regs)
> > > >> {
> > > >> if (user_mode(regs)) {
> > > >> - ulong syscall = regs->a7;
> > > >> + long syscall = regs->a7;
> > > >>
> > > >> regs->epc += 4;
> > > >> regs->orig_a0 = regs->a0;
> > > >> @@ -306,9 +306,9 @@ asmlinkage __visible __trap_section void do_trap_ecall_u(struct pt_regs *regs)
> > > >>
> > > >> syscall = syscall_enter_from_user_mode(regs, syscall);
> > > >>
> > > >> - if (syscall < NR_syscalls)
> > > >> + if (syscall >= 0 && syscall < NR_syscalls)
> > > >> syscall_handler(regs, syscall);
> > > >> - else
> > > >> + else if (syscall != -1)
> > > >> regs->a0 = -ENOSYS;
> > > >>
> > > >> syscall_exit_to_user_mode(regs);
> > > >
> > > > Unfortunately, this change introduced a regression: it broke strace
> > > > syscall tampering on riscv. When the tracer changes syscall number to -1,
> > > > the kernel fails to initialize a0 with -ENOSYS and subsequently fails to
> > > > return the error code of the failed syscall to userspace.
> > >
> > > In the patch v2, we actually do the right thing. But as Björn Töpel's
> > > suggestion and we found cast long to ulong is implementation-defined
> > > behavior in C, so we change it to current form. So revert this patch and
> > > apply patch v2 should fix this issue. Patch v2 uses ths same way with
> > > other architectures.
> > >
> > > [1]: https://lore.kernel.org/all/20230718162940.226118-1-CoelacanthusHex@gmail.com/
> >
> > Not reverting, but a fix to make sure that a0 is initialized to -ENOSYS, e.g.:
> >
> > --8<--
> > diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
> > index 05a16b1f0aee..51ebfd23e007 100644
> > --- a/arch/riscv/kernel/traps.c
> > +++ b/arch/riscv/kernel/traps.c
> > @@ -319,6 +319,7 @@ void do_trap_ecall_u(struct pt_regs *regs)
> >
> > regs->epc += 4;
> > regs->orig_a0 = regs->a0;
> > + regs->a0 = -ENOSYS;
>
> Given that struct user_regs_struct doesn't have orig_a0, wouldn't this
> clobber a0 too early so that the tracer will get -ENOSYS in place of the
> first syscall argument?
No, that's ok. It's handled by various wrappers where the arguments
are pulled out.
Björn
More information about the linux-riscv
mailing list