[PATCH v2 4/6] RISC-V: Detect unaligned vector accesses supported.
Conor Dooley
conor.dooley at microchip.com
Fri Jun 21 03:06:31 PDT 2024
On Thu, Jun 20, 2024 at 03:14:14PM -0700, Charlie Jenkins wrote:
> On Thu, Jun 20, 2024 at 05:31:28PM -0400, Jesse Taube wrote:
> >
> >
> > On 6/17/24 22:09, Charlie Jenkins wrote:
> > > On Mon, Jun 17, 2024 at 06:43:32PM -0700, Charlie Jenkins wrote:
> > > > On Thu, Jun 13, 2024 at 03:16:13PM -0400, Jesse Taube wrote:
> > > > > Run a unaligned vector access to test if the system supports
> > > > > vector unaligned access. Add the result to a new key in hwprobe.
> > > > > This is useful for usermode to know if vector misaligned accesses are
> > > > > supported and if they are faster or slower than equivalent byte accesses.
> > > > >
> > > > > Signed-off-by: Jesse Taube <jesse at rivosinc.com>
> > > > > ---
> > > > > V1 -> V2:
> > > > > - Add Kconfig options
> > > > > - Add insn_is_vector
> > > > > - Add handle_vector_misaligned_load
> > > > > - Fix build
> > > > > - Seperate vector from scalar misaligned access
> > > > > - This patch was almost completely rewritten
> > > > > ---
> > > > > arch/riscv/Kconfig | 41 +++++++
> > > > > arch/riscv/include/asm/cpufeature.h | 7 +-
> > > > > arch/riscv/include/asm/entry-common.h | 11 --
> > > > > arch/riscv/include/asm/hwprobe.h | 2 +-
> > > > > arch/riscv/include/asm/vector.h | 1 +
> > > > > arch/riscv/include/uapi/asm/hwprobe.h | 5 +
> > > > > arch/riscv/kernel/Makefile | 4 +-
> > > > > arch/riscv/kernel/sys_hwprobe.c | 41 +++++++
> > > > > arch/riscv/kernel/traps_misaligned.c | 119 ++++++++++++++++++++-
> > > > > arch/riscv/kernel/unaligned_access_speed.c | 9 +-
> > > > > arch/riscv/kernel/vector.c | 2 +-
> > > > > 11 files changed, 221 insertions(+), 21 deletions(-)
> > > > >
> > > > > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > > > > index b94176e25be1..f12df0ca6c18 100644
> > > > > --- a/arch/riscv/Kconfig
> > > > > +++ b/arch/riscv/Kconfig
> > > > > @@ -723,6 +723,12 @@ config RISCV_MISALIGNED
> > > > > help
> > > > > Embed support for emulating misaligned loads and stores.
> > > > > +config RISCV_VECTOR_MISALIGNED
> > > > > + bool
> > > > > + depends on RISCV_ISA_V
> > > > > + help
> > > > > + Enable detecting support for vector misaligned loads and stores.
> > > > > +
> > > > > choice
> > > > > prompt "Unaligned Accesses Support"
> > > > > default RISCV_PROBE_UNALIGNED_ACCESS
> > > > > @@ -774,6 +780,41 @@ config RISCV_EFFICIENT_UNALIGNED_ACCESS
> > > > > endchoice
> > > > > +choice
> > > > > + prompt "Vector unaligned Accesses Support"
> > > > > + depends on RISCV_ISA_V
> > > > > + default RISCV_PROBE_VECTOR_UNALIGNED_ACCESS
> > > > > + help
> > > > > + This determines the level of support for vector unaligned accesses. This
> > > > > + information is used by the kernel to perform optimizations.
I haven't actually checked the patchset, but is it actually used by the
kernel to perform optimisations?
> > > > > It is also
> > > > > + exposed to user space via the hwprobe syscall. The hardware will be
> > > > > + probed at boot by default.
> > > > > +
> > > > > +config RISCV_DETECT_VECTOR_UNALIGNED_ACCESS
> > > >
> > > > This is not used anywhere, what is the reason for including it?
> >
> > This is so that we can check if they are supported or not, but not check the
> > speed of them. Similar to RISCV_EMULATED_UNALIGNED_ACCESS.
>
> What do you mean? It isn't used anywhere so this "check if they are
> supported or not" is not guarded by this config.
>
> >
> > > >
> > > > > + bool "Detect support for vector unaligned accesses"
> > > > > + select RISCV_VECTOR_MISALIGNED
> > > > > + help
> > > > > + During boot, the kernel will detect if the system supports vector
> > > > > + unaligned accesses.
> > > > > +
> > > > > +config RISCV_PROBE_VECTOR_UNALIGNED_ACCESS
> > > > > + bool "Probe speed of vector unaligned accesses"
> > > > > + select RISCV_VECTOR_MISALIGNED
> > > > > + help
> > > > > + During boot, the kernel will run a series of tests to determine the
> > > > > + speed of vector unaligned accesses if they are supported. This probing
> > > > > + will dynamically determine the speed of vector unaligned accesses on
> > > > > + the underlying system if they are supported.
> > > > > +
> > > > > +config CONFIG_RISCV_UNALIGNED_ACCESS_UNSUPPORTED
> > > >
> > > > This should not be prefixed with CONFIG and does not include VECTOR in
> > > > the name.
> >
> > Huh thought it would warn fixed though
>
> What do you mean by "warn fixed"?
>
> >
> > > I assume you meant to put
> > > > "RISCV_VEC_UNALIGNED_ACCESS_UNSUPPORTED" here?
> >
> > This is to leave a faster path like SLOW or FAST to say that unaligned
> > access arent suported.
>
> I am not sure what you are responding to. This comment seems to be
> responding to my correction of
> CONFIG_RISCV_UNALIGNED_ACCESS_UNSUPPORTED->RISCV_VEC_UNALIGNED_ACCESS_UNSUPPORTED
> so I don't see how that ties into SLOW/FAST.
>
> >
> > > >
> > > > This was also intentionally left out on the scalar side [1]. The
> > > > implication here is that having this config will cause people to compile
> > > > kernels without unaligned access support which really shouldn't be
> > > > something we are explicitly supporting.
> > > >
> > > > If somebody does want to support hardware that does not handle vector
> > > > unaligned accesses, the solution should be to add emulation support to
> > > > the kernel.
> >
> > Yes but we dont have emulation support yet so I do think its a good idea.
>
> I am hesitant because it is very likely that somebody will add support
> for unaligned vector emulation. When there is emulation support, this
> config option should not exist to be consistent with scalar. However if
> we add this option in now, we must expect a user to enable this config,
> and then
I dunno, I think there could be value in having the option here. For
scalar, we couldn't have an option that would break the uABI, so the
unsupported option wasn't okay. That's not a constraint that we have for
vector.
For vector, if you have a system that doesn't support misaligned access,
you probably don't want to emulate the accesses either, since that's
likely remove any performance gains you get from using vector in the
first place, so I can see benefit in the option.
Enabling the probing is going to end up with same outcome for userspace
as having this option on such a system, so it comes down to whether you
want to allow people to skip the probing if they know their system has
this problem.
> we will have to get rid of it later. Users are not always happy
> when config options are removed.
I dunno, I don't think that adding emulation requires that we remove
this unsupported option.
Additionally, what are we doing in the kernel if we detect that
misaligned stuff isn't supported? Are we going to mandate that kernel
code is aligned only, disable in-kernel vector or some other mechanism
to make sure that things like crypto code don't have/introduce code
that'll not run on these systems?
Cheers,
Conor.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20240621/cb13aa29/attachment.sig>
More information about the linux-riscv
mailing list