[PATCH v2] riscv: dts: starfive: Set EMMC vqmmc maximum voltage to 3.3V on JH7110 boards

[Shengyu Qu]

Hi Conor,

 From star64's schematic, I didn't see any difference between star64 and
vf2's emmc vqmmc source design and aldo4 is not shared with other
peripheral at all. And this patch is tested on my vf2 with no problem at
all. So I think it is supported.

Best regards,
Shengyu

在 2024/6/13 0:18, Conor Dooley 写道:
> On Wed, Jun 12, 2024 at 06:33:31PM +0800, Shengyu Qu wrote:
>> Currently, for JH7110 boards with EMMC slot, vqmmc voltage for EMMC is
>> fixed to 1.8V, while the spec needs it to be 3.3V on low speed mode and
>> should support switching to 1.8V when using higher speed mode. Since
>> there are no other peripherals using the same voltage source of EMMC's
>> vqmmc(ALDO4) on every board currently supported by mainline kernel,
> 
> I should've asked last time around, does the star64 also support 3.3
> volts?
> 
>> regulator-max-microvolt of ALDO4 should be set to 3.3V.
>>
>> Cc: stable at vger.kernel.org
>> Signed-off-by: Shengyu Qu <wiagn233 at outlook.com>
>> Fixes: 7dafcfa79cc9 ("riscv: dts: starfive: enable DCDC1&ALDO4 node in axp15060")
>> ---
>>   arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
>> index 37b4c294ffcc..c7a549ec7452 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
>> @@ -244,7 +244,7 @@ emmc_vdd: aldo4 {
>>   				regulator-boot-on;
>>   				regulator-always-on;
>>   				regulator-min-microvolt = <1800000>;
>> -				regulator-max-microvolt = <1800000>;
>> +				regulator-max-microvolt = <3300000>;
>>   				regulator-name = "emmc_vdd";
>>   			};
>>   		};
>> -- 
>> 2.39.2
>>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_0xE3520CC91929C8E7.asc
Type: application/pgp-keys
Size: 6868 bytes
Desc: OpenPGP public key
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20240613/d6a6af78/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_signature.asc
Type: application/pgp-signature
Size: 840 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20240613/d6a6af78/attachment.sig>