[PATCH] riscv: dts: starfive: Update flash partition layout

[Hal Feng]

> On 03.06.24 23:27, Heinrich Schuchardt wrote:
> On 03.06.24 17:07, matthias.bgg at kernel.org wrote:
> > From: Matthias Brugger <matthias.bgg at gmail.com>
> >
> > Up to now, the describe flash partition layout has some gaps.
> > Use the whole flash chip by getting rid of the gaps.
> >
> > Suggested-by: Heinrich Schuchardt <heinrich.schuchardt at canonical.com>
> > Signed-off-by: Matthias Brugger <matthias.bgg at gmail.com>
> 
> For flashing larger firmware like EDK II it is helpful to maximize the partition sizes.
> Thanks for sending the patch.
> 
> Commit 8384087a ("riscv: dts: starfive: Add QSPI controller node for StarFive
> JH7110 SoC") https://lore.kernel.org/linux-riscv/20230804020254.291239-4-
> william.qiu at starfivetech.com/
> introduced the current layout.
> 
> CCing Starfive's U-Boot reviewers.
> 
> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt at canonical.com>

We added a "reserved-data" partition because the u-boot of VF2 didn't
require a large space and users can use this partition to do something
they want.

Best regards,
Hal

> 
> >
> > ---
> >
> >   arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 7 ++-----
> >   1 file changed, 2 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> > b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> > index 8ff6ea64f0489..37b4c294ffcc5 100644
> > --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> > +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> > @@ -321,16 +321,13 @@ partitions {
> >   			#size-cells = <1>;
> >
> >   			spl at 0 {
> > -				reg = <0x0 0x80000>;
> > +				reg = <0x0 0xf0000>;
> >   			};
> >   			uboot-env at f0000 {
> >   				reg = <0xf0000 0x10000>;
> >   			};
> >   			uboot at 100000 {
> > -				reg = <0x100000 0x400000>;
> > -			};
> > -			reserved-data at 600000 {
> > -				reg = <0x600000 0xa00000>;
> > +				reg = <0x100000 0xf00000>;
> >   			};
> >   		};
> >   	};