[PATCH v3 0/1] Add basic SPI support on TH1520

[Drew Fustini]

On Fri, Jul 26, 2024 at 04:19:51AM -0400, Emil Renner Berthing wrote:
> Drew Fustini wrote:
> > On Fri, Jul 05, 2024 at 03:04:58PM +0530, Kanak Shilledar wrote:
> > > Implemented basic SPI support for TH1520 SoC. There are two SPIs reserved
> > > on the LicheePi4A, one on the SPI Flash pads that are blanked out on the
> > > back, and one on the pins. I implemented the one connected to the pad.
> > >
> > > It is using a fixed clock of 396MHz. The address and clock frequency was
> > > referenced from the TH1520 System Reference Manual [1].
> > >
> > > [...]
> >
> > Applied to thead-dt-for-next, thanks!
> 
> Hi Drew,
> 
> Are you sure you want to merge this patch? It adds another dummy clock for the
> SPI, but the next kernel should have your clock driver that actually models the
> SPI clock.
> Also the clock driver says the SPI clock has a frequency of 792MHz, eg. double
> of what this dummy clock is set to.
> 
> /Emil

I am planning send updated dts patches for thead,th1520-clk-ap support
that addresses your recent comment [1]. I'll include a patch to convert
the SPI clock similar to the other dts patches in that series. Assuming
there are no issues with that new series, I will apply them to
thead-dt-for-next with enough testing time for them to be included in
the 6.12 pull request to Arnd.

Thanks,
Drew

[1] https://lore.kernel.org/linux-riscv/CAJM55Z8uo-Z_9ruyqygK1pbBCTkCxMBVoF8GD2dajhTKOYrAfA@mail.gmail.com/