[PATCH] cache: StarFive: Require a 64-bit system

[Palmer Dabbelt]

From: Palmer Dabbelt <palmer at rivosinc.com>

This has a bunch of {read,write}q() calls, so it won't work on 32-bit
systems.  I don't think there's any 32-bit StarFive systems, so for now
just require 64-bit.

Fixes: cabff60ca77d ("cache: Add StarFive StarLink cache management")
Signed-off-by: Palmer Dabbelt <palmer at rivosinc.com>
---
 drivers/cache/Kconfig                   | 1 +
 drivers/cache/starfive_starlink_cache.c | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/cache/Kconfig b/drivers/cache/Kconfig
index 94abd8f632a7..db51386c663a 100644
--- a/drivers/cache/Kconfig
+++ b/drivers/cache/Kconfig
@@ -18,6 +18,7 @@ config STARFIVE_STARLINK_CACHE
 	bool "StarFive StarLink Cache controller"
 	depends on RISCV
 	depends on ARCH_STARFIVE
+	depends on 64BIT
 	select RISCV_DMA_NONCOHERENT
 	select RISCV_NONSTANDARD_CACHE_OPS
 	help
diff --git a/drivers/cache/starfive_starlink_cache.c b/drivers/cache/starfive_starlink_cache.c
index 24c7d078ca22..8ee9569771f8 100644
--- a/drivers/cache/starfive_starlink_cache.c
+++ b/drivers/cache/starfive_starlink_cache.c
@@ -19,7 +19,7 @@
 #define STARLINK_CACHE_FLUSH_CTL			0x10
 #define STARLINK_CACHE_ALIGN				0x40
 
-#define STARLINK_CACHE_ADDRESS_RANGE_MASK		GENMASK(39, 0)
+#define STARLINK_CACHE_ADDRESS_RANGE_MASK		GENMASK(39ULL, 0)
 #define STARLINK_CACHE_FLUSH_CTL_MODE_MASK		GENMASK(2, 1)
 #define STARLINK_CACHE_FLUSH_CTL_ENABLE_MASK		BIT(0)
 
-- 
2.45.2