[PATCH v1] riscv: dts: starfive: remove non-existant spi device from jh7110-common.dtsi

[Conor Dooley]

There is no rohm,dh2228fv on any of supported JH7110 boards - in fact
the dh2228fv almost certainly does not exist as it is not a valid Rohm
part number. Likely a typo by Maxime when adding the device originally,
and should have been bh2228fv, but these boards do not have a bh2228fv
either! Remove it from jh7110-common.dtsi - pretending to have a device
so that the spidev driver will be bound by Linux is not acceptable.

Fixes: 74fb20c8f05d ("riscv: dts: starfive: Add spi node and pins configuration")
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
CC: Emil Renner Berthing <kernel at esmil.dk>
CC: Conor Dooley <conor at kernel.org>
CC: Rob Herring <robh at kernel.org>
CC: Krzysztof Kozlowski <krzk+dt at kernel.org>
CC: Paul Walmsley <paul.walmsley at sifive.com>
CC: Palmer Dabbelt <palmer at dabbelt.com>
CC: Albert Ou <aou at eecs.berkeley.edu>
CC: William Qiu <william.qiu at starfivetech.com>
CC: linux-riscv at lists.infradead.org
CC: devicetree at vger.kernel.org
CC: linux-kernel at vger.kernel.org
---
 arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index 8ff6ea64f048..395436ec0f97 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -346,12 +346,6 @@ &spi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
 	status = "okay";
-
-	spi_dev0: spi at 0 {
-		compatible = "rohm,dh2228fv";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-	};
 };
 
 &sysgpio {
-- 
2.43.2