[PATCH v9 13/39] KVM: arm64: Manage GCS registers for guests
Marc Zyngier
maz at kernel.org
Wed Jul 10 08:17:02 PDT 2024
On Tue, 25 Jun 2024 15:57:41 +0100,
Mark Brown <broonie at kernel.org> wrote:
>
> GCS introduces a number of system registers for EL1 and EL0, on systems
> with GCS we need to context switch them and expose them to VMMs to allow
> guests to use GCS, as well as describe their fine grained traps to
> nested virtualisation. Traps are already disabled.
I don't see anything related to FGTs at all.
>
> Reviewed-by: Thiago Jung Bauermann <thiago.bauermann at linaro.org>
> Signed-off-by: Mark Brown <broonie at kernel.org>
> ---
> arch/arm64/include/asm/kvm_host.h | 14 +++++++++
> arch/arm64/include/asm/vncr_mapping.h | 2 ++
> arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h | 48 +++++++++++++++++++++++-------
> arch/arm64/kvm/sys_regs.c | 25 +++++++++++++++-
> 4 files changed, 78 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index 36b8e97bf49e..316fb412f355 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -411,6 +411,10 @@ enum vcpu_sysreg {
> GCR_EL1, /* Tag Control Register */
> TFSRE0_EL1, /* Tag Fault Status Register (EL0) */
>
> + /* Guarded Control Stack registers */
> + GCSCRE0_EL1, /* Guarded Control Stack Control (EL0) */
> + GCSPR_EL0, /* Guarded Control Stack Pointer (EL0) */
> +
> /* 32bit specific registers. */
> DACR32_EL2, /* Domain Access Control Register */
> IFSR32_EL2, /* Instruction Fault Status Register */
> @@ -481,6 +485,10 @@ enum vcpu_sysreg {
> VNCR(PIR_EL1), /* Permission Indirection Register 1 (EL1) */
> VNCR(PIRE0_EL1), /* Permission Indirection Register 0 (EL1) */
>
> + /* Guarded Control Stack registers */
> + VNCR(GCSPR_EL1), /* Guarded Control Stack Pointer (EL1) */
> + VNCR(GCSCR_EL1), /* Guarded Control Stack Control (EL1) */
> +
> VNCR(HFGRTR_EL2),
> VNCR(HFGWTR_EL2),
> VNCR(HFGITR_EL2),
> @@ -1343,6 +1351,12 @@ static inline bool __vcpu_has_feature(const struct kvm_arch *ka, int feature)
>
> #define kvm_vcpu_initialized(v) vcpu_get_flag(vcpu, VCPU_INITIALIZED)
>
> +static inline bool has_gcs(void)
> +{
> + return IS_ENABLED(CONFIG_ARM64_GCS) &&
> + cpus_have_final_cap(ARM64_HAS_GCS);
> +}
This is mostly useless, see below.
> +
> int kvm_trng_call(struct kvm_vcpu *vcpu);
> #ifdef CONFIG_KVM
> extern phys_addr_t hyp_mem_base;
> diff --git a/arch/arm64/include/asm/vncr_mapping.h b/arch/arm64/include/asm/vncr_mapping.h
> index df2c47c55972..5e83e6f579fd 100644
> --- a/arch/arm64/include/asm/vncr_mapping.h
> +++ b/arch/arm64/include/asm/vncr_mapping.h
> @@ -88,6 +88,8 @@
> #define VNCR_PMSIRR_EL1 0x840
> #define VNCR_PMSLATFR_EL1 0x848
> #define VNCR_TRFCR_EL1 0x880
> +#define VNCR_GCSPR_EL1 0x8C0
> +#define VNCR_GCSCR_EL1 0x8D0
> #define VNCR_MPAM1_EL1 0x900
> #define VNCR_MPAMHCR_EL2 0x930
> #define VNCR_MPAMVPMV_EL2 0x938
> diff --git a/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h b/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
> index 4be6a7fa0070..b20212d80e9b 100644
> --- a/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
> +++ b/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
> @@ -16,6 +16,27 @@
> #include <asm/kvm_hyp.h>
> #include <asm/kvm_mmu.h>
>
> +static inline struct kvm_vcpu *ctxt_to_vcpu(struct kvm_cpu_context *ctxt)
> +{
> + struct kvm_vcpu *vcpu = ctxt->__hyp_running_vcpu;
> +
> + if (!vcpu)
> + vcpu = container_of(ctxt, struct kvm_vcpu, arch.ctxt);
> +
> + return vcpu;
> +}
> +
> +static inline bool ctxt_has_gcs(struct kvm_cpu_context *ctxt)
> +{
> + struct kvm_vcpu *vcpu;
> +
> + if (!cpus_have_final_cap(ARM64_HAS_GCS))
> + return false;
> +
> + vcpu = ctxt_to_vcpu(ctxt);
> + return kvm_has_feat(kern_hyp_va(vcpu->kvm), ID_AA64PFR1_EL1, GCS, IMP);
> +}
> +
> static inline void __sysreg_save_common_state(struct kvm_cpu_context *ctxt)
> {
> ctxt_sys_reg(ctxt, MDSCR_EL1) = read_sysreg(mdscr_el1);
> @@ -25,16 +46,8 @@ static inline void __sysreg_save_user_state(struct kvm_cpu_context *ctxt)
> {
> ctxt_sys_reg(ctxt, TPIDR_EL0) = read_sysreg(tpidr_el0);
> ctxt_sys_reg(ctxt, TPIDRRO_EL0) = read_sysreg(tpidrro_el0);
> -}
> -
> -static inline struct kvm_vcpu *ctxt_to_vcpu(struct kvm_cpu_context *ctxt)
> -{
> - struct kvm_vcpu *vcpu = ctxt->__hyp_running_vcpu;
> -
> - if (!vcpu)
> - vcpu = container_of(ctxt, struct kvm_vcpu, arch.ctxt);
> -
> - return vcpu;
> + if (ctxt_has_gcs(ctxt))
> + ctxt_sys_reg(ctxt, GCSPR_EL0) = read_sysreg_s(SYS_GCSPR_EL0);
> }
>
> static inline bool ctxt_has_mte(struct kvm_cpu_context *ctxt)
> @@ -80,6 +93,12 @@ static inline void __sysreg_save_el1_state(struct kvm_cpu_context *ctxt)
> ctxt_sys_reg(ctxt, PAR_EL1) = read_sysreg_par();
> ctxt_sys_reg(ctxt, TPIDR_EL1) = read_sysreg(tpidr_el1);
>
> + if (ctxt_has_gcs(ctxt)) {
Since this is conditioned on S1PIE, it should be only be evaluated
when PIE is enabled in the guest.
> + ctxt_sys_reg(ctxt, GCSPR_EL1) = read_sysreg_el1(SYS_GCSPR);
> + ctxt_sys_reg(ctxt, GCSCR_EL1) = read_sysreg_el1(SYS_GCSCR);
> + ctxt_sys_reg(ctxt, GCSCRE0_EL1) = read_sysreg_s(SYS_GCSCRE0_EL1);
Why is this part of the EL1 context? It clearly only matters to EL0
execution, so it could be switched in load/put on nVHE as well. And
actually, given that the whole thing is strictly for userspace, why do
we switch *anything* eagerly at all?
> + }
> +
> if (ctxt_has_mte(ctxt)) {
> ctxt_sys_reg(ctxt, TFSR_EL1) = read_sysreg_el1(SYS_TFSR);
> ctxt_sys_reg(ctxt, TFSRE0_EL1) = read_sysreg_s(SYS_TFSRE0_EL1);
> @@ -113,6 +132,8 @@ static inline void __sysreg_restore_user_state(struct kvm_cpu_context *ctxt)
> {
> write_sysreg(ctxt_sys_reg(ctxt, TPIDR_EL0), tpidr_el0);
> write_sysreg(ctxt_sys_reg(ctxt, TPIDRRO_EL0), tpidrro_el0);
> + if (ctxt_has_gcs(ctxt))
> + write_sysreg_s(ctxt_sys_reg(ctxt, GCSPR_EL0), SYS_GCSPR_EL0);
> }
>
> static inline void __sysreg_restore_el1_state(struct kvm_cpu_context *ctxt)
> @@ -156,6 +177,13 @@ static inline void __sysreg_restore_el1_state(struct kvm_cpu_context *ctxt)
> write_sysreg(ctxt_sys_reg(ctxt, PAR_EL1), par_el1);
> write_sysreg(ctxt_sys_reg(ctxt, TPIDR_EL1), tpidr_el1);
>
> + if (ctxt_has_gcs(ctxt)) {
> + write_sysreg_el1(ctxt_sys_reg(ctxt, GCSPR_EL1), SYS_GCSPR);
> + write_sysreg_el1(ctxt_sys_reg(ctxt, GCSCR_EL1), SYS_GCSCR);
> + write_sysreg_s(ctxt_sys_reg(ctxt, GCSCRE0_EL1),
> + SYS_GCSCRE0_EL1);
> + }
> +
> if (ctxt_has_mte(ctxt)) {
> write_sysreg_el1(ctxt_sys_reg(ctxt, TFSR_EL1), SYS_TFSR);
> write_sysreg_s(ctxt_sys_reg(ctxt, TFSRE0_EL1), SYS_TFSRE0_EL1);
> diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> index 22b45a15d068..cf068dcfbd49 100644
> --- a/arch/arm64/kvm/sys_regs.c
> +++ b/arch/arm64/kvm/sys_regs.c
> @@ -2015,6 +2015,23 @@ static unsigned int mte_visibility(const struct kvm_vcpu *vcpu,
> .visibility = mte_visibility, \
> }
>
> +static unsigned int gcs_visibility(const struct kvm_vcpu *vcpu,
> + const struct sys_reg_desc *rd)
> +{
> + if (has_gcs())
> + return 0;
No. we've been here before.
> +
> + return REG_HIDDEN;
> +}
> +
> +#define GCS_REG(name) { \
> + SYS_DESC(SYS_##name), \
> + .access = undef_access, \
> + .reset = reset_unknown, \
> + .reg = name, \
> + .visibility = gcs_visibility, \
> +}
> +
> static unsigned int el2_visibility(const struct kvm_vcpu *vcpu,
> const struct sys_reg_desc *rd)
> {
> @@ -2306,7 +2323,8 @@ static const struct sys_reg_desc sys_reg_descs[] = {
> ID_AA64PFR0_EL1_GIC |
> ID_AA64PFR0_EL1_AdvSIMD |
> ID_AA64PFR0_EL1_FP), },
> - ID_SANITISED(ID_AA64PFR1_EL1),
> + ID_WRITABLE(ID_AA64PFR1_EL1, ~(ID_AA64PFR1_EL1_RES0 |
> + ID_AA64PFR1_EL1_BT)),
I don't know what you're trying to do here, but that's not right. If
you want to make this register writable, here's the shopping list:
https://lore.kernel.org/all/87ikxsi0v9.wl-maz@kernel.org/
> ID_UNALLOCATED(4,2),
> ID_UNALLOCATED(4,3),
> ID_WRITABLE(ID_AA64ZFR0_EL1, ~ID_AA64ZFR0_EL1_RES0),
> @@ -2390,6 +2408,10 @@ static const struct sys_reg_desc sys_reg_descs[] = {
> PTRAUTH_KEY(APDB),
> PTRAUTH_KEY(APGA),
>
> + GCS_REG(GCSCR_EL1),
> + GCS_REG(GCSPR_EL1),
> + GCS_REG(GCSCRE0_EL1),
> +
> { SYS_DESC(SYS_SPSR_EL1), access_spsr},
> { SYS_DESC(SYS_ELR_EL1), access_elr},
>
> @@ -2476,6 +2498,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
> { SYS_DESC(SYS_SMIDR_EL1), undef_access },
> { SYS_DESC(SYS_CSSELR_EL1), access_csselr, reset_unknown, CSSELR_EL1 },
> { SYS_DESC(SYS_CTR_EL0), access_ctr },
> + GCS_REG(GCSPR_EL0),
> { SYS_DESC(SYS_SVCR), undef_access },
>
> { PMU_SYS_REG(PMCR_EL0), .access = access_pmcr, .reset = reset_pmcr,
I don't see the vcpu's hcrx_el2 being updated to enable GCS. How does
it work then? I also don't see the FGU updates when GCS is disabled,
nor the corresponding FGT bits being marked as RES0.
M.
--
Without deviation from the norm, progress is not possible.
More information about the linux-riscv
mailing list