[PATCH v6 2/2] drivers: hwmon: sophgo: Add SG2042 external hardware monitor support
Chen Wang
unicorn_wang at outlook.com
Sun Jul 7 17:25:55 PDT 2024
On 2024/7/3 10:30, Inochi Amaoto wrote:
> SG2042 use an external MCU to provide basic hardware information
> and thermal sensors.
>
> Add driver support for the onboard MCU of SG2042.
>
> Signed-off-by: Inochi Amaoto <inochiama at outlook.com>
> ---
> Documentation/hwmon/index.rst | 1 +
> Documentation/hwmon/sgmcu.rst | 44 +++
> drivers/hwmon/Kconfig | 11 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/sgmcu.c | 585 ++++++++++++++++++++++++++++++++++
> 5 files changed, 642 insertions(+)
> create mode 100644 Documentation/hwmon/sgmcu.rst
> create mode 100644 drivers/hwmon/sgmcu.c
>
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 03d313af469a..189626b3a055 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -203,6 +203,7 @@ Hardware Monitoring Kernel Drivers
> sch5636
> scpi-hwmon
> sfctemp
> + sgmcu
This driver is for sg2042 only, right? "sgmcu" looks be general for all
sophgo products.
> sht15
> sht21
> sht3x
> diff --git a/Documentation/hwmon/sgmcu.rst b/Documentation/hwmon/sgmcu.rst
> new file mode 100644
> index 000000000000..5669dcfb2a33
> --- /dev/null
> +++ b/Documentation/hwmon/sgmcu.rst
Same question as upon.
> @@ -0,0 +1,44 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Kernel driver sgmcu
> +=====================
> +
> +Supported chips:
> +
> + * Onboard MCU for sg2042
> +
> + Addresses scanned: -
> +
> + Prefix: 'sgmcu'
Same question as upon.
> +
> +Authors:
> +
> + - Inochi Amaoto <inochiama at outlook.com>
> +
> +Description
> +-----------
> +
> +This driver supprts hardware monitoring for onboard MCU with
> +PMBus interface.
> +
> +Usage Notes
> +-----------
> +
> +This driver does not auto-detect devices. You will have to instantiate
> +the devices explicitly.
> +Please see Documentation/i2c/instantiating-devices.rst for details.
> +
> +Platform data support
> +---------------------
> +
> +The driver supports standard PMBus driver platform data.
> +
> +Sysfs Attributes
> +----------------
> +
> +================= =============================================
> +temp1_input Measured temperature of SoC
> +temp1_crit Critical high temperature
> +temp1_crit_hyst hysteresis temperature restore from Critical
> +temp2_input Measured temperature of the base board
> +================= =============================================
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index e14ae18a973b..1100dd11f7f5 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -2079,6 +2079,17 @@ config SENSORS_SFCTEMP
> This driver can also be built as a module. If so, the module
> will be called sfctemp.
>
> +config SENSORS_SGMCU
Same question as upon.
> + tristate "Sophgo onboard MCU support"
Same question as upon.
> + depends on I2C
> + depends on ARCH_SOPHGO || COMPILE_TEST
> + help
> + Support for onboard MCU of Sophgo SoCs. This mcu provides power
> + control and some basic information.
> +
> + This driver can be built as a module. If so, the module
> + will be called sgmcu.
> +
> config SENSORS_SURFACE_FAN
> tristate "Surface Fan Driver"
> depends on SURFACE_AGGREGATOR
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index e3f25475d1f0..e9b78ff8338e 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -195,6 +195,7 @@ obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
> obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o
> obj-$(CONFIG_SENSORS_SCH5636) += sch5636.o
> obj-$(CONFIG_SENSORS_SFCTEMP) += sfctemp.o
> +obj-$(CONFIG_SENSORS_SGMCU) += sgmcu.o
Same question as upon.
> obj-$(CONFIG_SENSORS_SL28CPLD) += sl28cpld-hwmon.o
> obj-$(CONFIG_SENSORS_SHT15) += sht15.o
> obj-$(CONFIG_SENSORS_SHT21) += sht21.o
> diff --git a/drivers/hwmon/sgmcu.c b/drivers/hwmon/sgmcu.c
> new file mode 100644
> index 000000000000..d941d6fe741f
> --- /dev/null
> +++ b/drivers/hwmon/sgmcu.c
Same question as upon.
> @@ -0,0 +1,585 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2024 Inochi Amaoto <inochiama at outlook.com>
> + *
> + * Sophgo power control mcu for SG2042
> + */
> +
> +#include <linux/debugfs.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/err.h>
> +#include <linux/hwmon.h>
> +
> +/* fixed MCU registers */
> +#define REG_BOARD_TYPE 0x00
> +#define REG_MCU_FIRMWARE_VERSION 0x01
> +#define REG_PCB_VERSION 0x02
> +#define REG_PWR_CTRL 0x03
> +#define REG_SOC_TEMP 0x04
> +#define REG_BOARD_TEMP 0x05
> +#define REG_RST_COUNT 0x0a
> +#define REG_UPTIME 0x0b
> +#define REG_RESET_REASON 0x0d
> +#define REG_MCU_TYPE 0x18
> +#define REG_CRITICAL_ACTIONS 0x65
> +#define REG_CRITICAL_TEMP 0x66
> +#define REG_REPOWER_TEMP 0x67
> +
> +#define CRITICAL_ACTION_REBOOT 0x1
> +#define CRITICAL_ACTION_POWEROFF 0x2
> +
> +#define DEFAULT_REPOWER_TEMP 60
> +#define MAX_REPOWER_TEMP 100
> +
> +#define sg2042_mcu_read_byte(client, reg) \
> + i2c_smbus_read_byte_data(client, reg)
> +#define sg2042_mcu_write_byte(client, reg, value) \
> + i2c_smbus_write_byte_data(client, reg, value)
> +#define sg2042_mcu_read_block(client, reg, array) \
> + i2c_smbus_read_i2c_block_data(client, reg, sizeof(array), array)
> +
> +#define DEFINE_MCU_ATTR_READ_FUNC(_name, _type, _format) \
> + static ssize_t _name##_show(struct device *dev, \
> + struct device_attribute *attr, \
> + char *buf) \
> + { \
> + struct sg2042_mcu_data *mcu = dev_get_drvdata(dev); \
> + _type ret; \
> + ret = sg2042_mcu_get_##_name(mcu->client); \
> + if (ret < 0) \
> + return ret; \
> + return sprintf(buf, _format "\n", ret); \
> + }
> +
> +#define DEFINE_MCU_DEBUG_ATTR_READ_FUNC(_name, _type, _format) \
> + static int _name##_show(struct seq_file *seqf, \
> + void *unused) \
> + { \
> + struct sg2042_mcu_data *mcu = seqf->private; \
> + _type ret; \
> + ret = sg2042_mcu_get_##_name(mcu->client); \
> + if (ret < 0) \
> + return ret; \
> + seq_printf(seqf, _format "\n", ret); \
> + return 0; \
> + }
> +
> +#define _CREATE_DEBUG_ENTRY(name, perm, d, data) \
> + debugfs_create_file(#name, perm, d, data, &name##_fops)
> +
> +struct sg2042_mcu_board_data {
> + u8 id;
> + const char *name;
> +};
> +
> +struct sg2042_mcu_data {
> + struct i2c_client *client;
> + const struct sg2042_mcu_board_data *board_info;
> + struct dentry *debugfs;
> +};
> +
> +static const struct sg2042_mcu_board_data sg2042_boards_data[] = {
> + {
> + .id = 0x80,
> + .name = "SG2042 evb x8",
> + },
> + {
> + .id = 0x81,
> + .name = "SG2042R evb",
> + },
> + {
> + .id = 0x83,
> + .name = "SG2042 evb x4",
> + },
> + {
> + .id = 0x90,
> + .name = "Milk-V Pioneer",
> + },
> +};
Upstream kernel DTS only supports Milk-V pioneer, evb boards are not
supported in plan. Can we figure a method to let user extend this
outside kernel or just ask vendor to patch this when necessary?
> +
> +static const char *sg2042_mcu_reset_reason[8] = {
> + "Power supply overheat",
> + "Power supply failure",
> + "12V power supply failure",
> + "Reset commant",
> + "Unknown",
> + "Unknown",
> + "Unknown",
> + "SoC overheat",
> +};
> +
> +static struct dentry *sgmcu_debugfs;
> +
> +static int sg2042_mcu_get_board_type(struct i2c_client *client)
> +{
> + return sg2042_mcu_read_byte(client, REG_BOARD_TYPE);
> +}
> +
> +static int sg2042_mcu_get_firmware_version(struct i2c_client *client)
> +{
> + return sg2042_mcu_read_byte(client, REG_MCU_FIRMWARE_VERSION);
> +}
> +
> +static int sg2042_mcu_get_pcb_version(struct i2c_client *client)
> +{
> + return sg2042_mcu_read_byte(client, REG_PCB_VERSION);
> +}
> +
> +static int sg2042_mcu_get_soc_temp(struct i2c_client *client)
> +{
> + return sg2042_mcu_read_byte(client, REG_SOC_TEMP);
> +}
> +
> +static int sg2042_mcu_get_board_temp(struct i2c_client *client)
> +{
> + return sg2042_mcu_read_byte(client, REG_BOARD_TEMP);
> +}
> +
> +static int sg2042_mcu_get_reset_count(struct i2c_client *client)
> +{
> + return sg2042_mcu_read_byte(client, REG_RST_COUNT);
> +}
> +
> +static s32 sg2042_mcu_get_uptime(struct i2c_client *client)
> +{
> + int ret;
> + u8 time_val[2];
> +
> + ret = sg2042_mcu_read_block(client, REG_UPTIME, time_val);
> + if (ret < 0)
> + return ret;
> +
> + return (s32)(time_val[0]) + ((s32)(time_val[1]) << 8);
> +}
> +
> +static int sg2042_mcu_get_reset_reason(struct i2c_client *client)
> +{
> + return sg2042_mcu_read_byte(client, REG_RESET_REASON);
> +}
> +
> +static int sg2042_mcu_get_mcu_type(struct i2c_client *client)
> +{
> + return sg2042_mcu_read_byte(client, REG_MCU_TYPE);
> +}
> +
> +static int sg2042_mcu_get_soc_crit_action(struct i2c_client *client)
> +{
> + return sg2042_mcu_read_byte(client, REG_CRITICAL_ACTIONS);
> +}
> +
> +static int sg2042_mcu_get_soc_crit_temp(struct i2c_client *client)
> +{
> + return sg2042_mcu_read_byte(client, REG_CRITICAL_TEMP);
> +}
> +
> +static int sg2042_mcu_get_soc_hyst_temp(struct i2c_client *client)
> +{
> + return sg2042_mcu_read_byte(client, REG_REPOWER_TEMP);
> +}
> +
> +static int sg2042_mcu_set_soc_crit_action(struct i2c_client *client,
> + u8 value)
> +{
> + return sg2042_mcu_write_byte(client, REG_CRITICAL_ACTIONS, value);
> +}
> +
> +static int sg2042_mcu_set_soc_crit_temp(struct i2c_client *client,
> + u8 value)
> +{
> + return sg2042_mcu_write_byte(client, REG_CRITICAL_TEMP, value);
> +}
> +
> +static int sg2042_mcu_set_soc_hyst_temp(struct i2c_client *client,
> + u8 value)
> +{
> + return sg2042_mcu_write_byte(client, REG_REPOWER_TEMP, value);
> +}
> +
> +DEFINE_MCU_ATTR_READ_FUNC(reset_count, int, "%d");
> +DEFINE_MCU_ATTR_READ_FUNC(uptime, s32, "%d");
> +
> +static ssize_t reset_reason_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> + int ret, val, i;
> +
> + val = sg2042_mcu_get_reset_reason(mcu->client);
> + if (val < 0)
> + return val;
> +
> + ret = sprintf(buf, "Reason: 0x%02x\n", val);
> +
> + for (i = 0; i < ARRAY_SIZE(sg2042_mcu_reset_reason); i++) {
> + if (val & BIT(i))
> + ret += sprintf(buf + ret, "bit %d: %s\n", i,
> + sg2042_mcu_reset_reason[i]);
> + }
> +
> + return ret;
> +}
> +
> +static ssize_t critical_action_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> + int ret;
> + const char *action;
> +
> + ret = sg2042_mcu_get_soc_crit_action(mcu->client);
> + if (ret < 0)
> + return ret;
> +
> + if (ret == CRITICAL_ACTION_REBOOT)
> + action = "reboot";
> + else if (ret == CRITICAL_ACTION_POWEROFF)
> + action = "poweroff";
> + else
> + action = "unknown";
> +
> + return sprintf(buf, "%s\n", action);
> +}
> +
> +static ssize_t critical_action_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> + int value;
> +
> + if (sysfs_streq("reboot", buf))
> + value = CRITICAL_ACTION_REBOOT;
> + else if (sysfs_streq("poweroff", buf))
> + value = CRITICAL_ACTION_POWEROFF;
> + else
> + return -EINVAL;
> +
> + return sg2042_mcu_set_soc_crit_action(mcu->client, value);
> +}
> +
> +static DEVICE_ATTR_RO(reset_count);
> +static DEVICE_ATTR_RO(uptime);
> +static DEVICE_ATTR_RO(reset_reason);
> +static DEVICE_ATTR_RW(critical_action);
> +
> +DEFINE_MCU_DEBUG_ATTR_READ_FUNC(firmware_version, int, "0x%02x");
> +DEFINE_MCU_DEBUG_ATTR_READ_FUNC(pcb_version, int, "0x%02x");
> +
> +static int board_type_show(struct seq_file *seqf, void *unused)
> +{
> + struct sg2042_mcu_data *mcu = seqf->private;
> +
> + seq_printf(seqf, "%s\n", mcu->board_info->name ?: "Unknown");
> +
> + return 0;
> +}
> +
> +static int mcu_type_show(struct seq_file *seqf, void *unused)
> +{
> + struct sg2042_mcu_data *mcu = seqf->private;
> + int ret;
> +
> + ret = sg2042_mcu_get_mcu_type(mcu->client);
> + if (ret < 0)
> + return ret;
> +
> + seq_puts(seqf, ret ? "GD32\n" : "STM32\n");
> +
> + return 0;
> +}
> +
> +DEFINE_SHOW_ATTRIBUTE(firmware_version);
> +DEFINE_SHOW_ATTRIBUTE(pcb_version);
> +DEFINE_SHOW_ATTRIBUTE(mcu_type);
> +DEFINE_SHOW_ATTRIBUTE(board_type);
> +
> +// TODO: to debugfs
> +
> +static struct attribute *sg2042_mcu_attrs[] = {
> + &dev_attr_reset_count.attr,
> + &dev_attr_uptime.attr,
> + &dev_attr_reset_reason.attr,
> + &dev_attr_critical_action.attr,
> + NULL
> +};
> +
> +static const struct attribute_group sg2042_mcu_attr_group = {
> + .attrs = sg2042_mcu_attrs,
> +};
> +
> +static const struct hwmon_channel_info * const sg2042_mcu_info[] = {
> + HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL),
> + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_CRIT |
> + HWMON_T_CRIT_HYST,
> + HWMON_T_INPUT),
> + NULL
> +};
> +
> +static int sg2042_mcu_read_temp(struct device *dev,
> + u32 attr, int channel,
> + long *val)
> +{
> + struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> + long tmp;
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + switch (channel) {
> + case 0:
> + tmp = sg2042_mcu_get_soc_temp(mcu->client);
> + if (tmp < 0)
> + return tmp;
> + *val = tmp * 1000;
> + break;
> + case 1:
> + tmp = sg2042_mcu_get_board_temp(mcu->client);
> + if (tmp < 0)
> + return tmp;
> + *val = tmp * 1000;
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> + break;
> + case hwmon_temp_crit:
> + if (channel)
> + return -EOPNOTSUPP;
> +
> + tmp = sg2042_mcu_get_soc_crit_temp(mcu->client);
> + if (tmp < 0)
> + return tmp;
> + *val = tmp * 1000;
> + break;
> + case hwmon_temp_crit_hyst:
> + if (channel)
> + return -EOPNOTSUPP;
> +
> + tmp = sg2042_mcu_get_soc_hyst_temp(mcu->client);
> + if (tmp < 0)
> + return tmp;
> + *val = tmp * 1000;
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> + return 0;
> +}
> +
> +static int sg2042_mcu_read(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + switch (type) {
> + case hwmon_chip:
> + if (attr != hwmon_chip_update_interval)
> + return -EOPNOTSUPP;
> + *val = 1000;
> + break;
> + case hwmon_temp:
> + return sg2042_mcu_read_temp(dev, attr, channel, val);
> + default:
> + return -EOPNOTSUPP;
> + }
> + return 0;
> +}
> +
> +static int sg2042_mcu_write(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel, long val)
> +{
> + struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> + u8 down_temp, repower_temp;
> + int ret;
> +
> + if (type != hwmon_temp || attr != hwmon_temp_crit || !channel)
> + return -EOPNOTSUPP;
> +
> + switch (attr) {
> + case hwmon_temp_crit:
> + ret = sg2042_mcu_get_soc_hyst_temp(mcu->client);
> + if (ret < 0)
> + repower_temp = DEFAULT_REPOWER_TEMP;
> + else
> + repower_temp = ret;
> +
> + down_temp = val / 1000;
> + if (down_temp < repower_temp)
> + return -EINVAL;
> +
> + return sg2042_mcu_set_soc_crit_temp(mcu->client,
> + (u8)(val / 1000));
> + case hwmon_temp_crit_hyst:
> + ret = sg2042_mcu_get_soc_crit_temp(mcu->client);
> + if (ret < 0)
> + return -ENODEV;
> +
> + down_temp = ret;
> + repower_temp = val / 1000;
> + if (down_temp < repower_temp)
> + return -EINVAL;
> +
> + return sg2042_mcu_set_soc_hyst_temp(mcu->client,
> + (u8)(val / 1000));
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static umode_t sg2042_mcu_is_visible(const void *_data,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + switch (type) {
> + case hwmon_chip:
> + if (attr == hwmon_chip_update_interval)
> + return 0444;
> + break;
> + case hwmon_temp:
> + switch (attr) {
> + case hwmon_temp_input:
> + if (channel < 2)
> + return 0444;
> + break;
> + case hwmon_temp_crit:
> + case hwmon_temp_crit_hyst:
> + if (channel == 0)
> + return 0664;
> + break;
> + default:
> + return 0;
> + }
> + break;
> + default:
> + return 0;
> + }
> + return 0;
> +}
> +
> +static const struct hwmon_ops sg2042_mcu_ops = {
> + .is_visible = sg2042_mcu_is_visible,
> + .read = sg2042_mcu_read,
> + .write = sg2042_mcu_write,
> +};
> +
> +static const struct hwmon_chip_info sg2042_mcu_chip_info = {
> + .ops = &sg2042_mcu_ops,
> + .info = sg2042_mcu_info,
> +};
> +
> +static void sg2042_mcu_debugfs_init(struct sg2042_mcu_data *mcu,
> + struct device *dev)
> +{
> + mcu->debugfs = debugfs_create_dir(dev_name(dev), sgmcu_debugfs);
> + if (mcu->debugfs) {
> + _CREATE_DEBUG_ENTRY(firmware_version, 0444, mcu->debugfs, mcu);
> + _CREATE_DEBUG_ENTRY(pcb_version, 0444, mcu->debugfs, mcu);
> + _CREATE_DEBUG_ENTRY(mcu_type, 0444, mcu->debugfs, mcu);
> + _CREATE_DEBUG_ENTRY(board_type, 0444, mcu->debugfs, mcu);
> + }
> +}
> +
> +static int sg2042_mcu_check_board(u8 id)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(sg2042_boards_data); i++) {
> + if (sg2042_boards_data[i].id == id)
> + return i;
> + }
> +
> + return -ENODEV;
> +}
> +
> +static int sg2042_mcu_i2c_probe(struct i2c_client *client)
> +{
> + int ret;
> + struct device *dev = &client->dev;
> + struct sg2042_mcu_data *mcu;
> + struct device *hwmon_dev;
> +
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
> + I2C_FUNC_SMBUS_BLOCK_DATA))
> + return -EIO;
> +
> + ret = sg2042_mcu_get_board_type(client);
> + if (ret < 0)
> + return ret;
> +
> + ret = sg2042_mcu_check_board(ret);
> + if (ret < 0)
> + return ret;
> +
> + mcu = devm_kmalloc(dev, sizeof(*mcu), GFP_KERNEL);
> + if (!mcu)
> + return -ENOMEM;
> +
> + mcu->client = client;
> + mcu->board_info = &sg2042_boards_data[ret];
> +
> + ret = sysfs_create_group(&dev->kobj, &sg2042_mcu_attr_group);
> + if (ret < 0)
> + return ret;
> +
> + i2c_set_clientdata(client, mcu);
> +
> + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
> + mcu,
> + &sg2042_mcu_chip_info,
> + NULL);
> +
> + sg2042_mcu_debugfs_init(mcu, dev);
> +
> + return PTR_ERR_OR_ZERO(hwmon_dev);
> +}
> +
> +static void sg2042_mcu_i2c_remove(struct i2c_client *client)
> +{
> + struct device *dev = &client->dev;
> +
> + sysfs_remove_group(&dev->kobj, &sg2042_mcu_attr_group);
> +}
> +
> +static const struct i2c_device_id sg2042_mcu_id[] = {
> + { "sg2042_hwmon_mcu", 0 },
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, sg2042_mcu_id);
> +
> +static const struct of_device_id sg2042_mcu_of_id[] = {
> + { .compatible = "sophgo,sg2042-hwmon-mcu" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, sg2042_mcu_of_id);
> +
> +static struct i2c_driver sg2042_mcu_driver = {
> + .driver = {
> + .name = "sg2042-mcu",
> + .of_match_table = sg2042_mcu_of_id,
> + },
> + .probe = sg2042_mcu_i2c_probe,
> + .remove = sg2042_mcu_i2c_remove,
> + .id_table = sg2042_mcu_id,
> +};
> +
> +static int __init sg2042_mcu_init(void)
> +{
> + sgmcu_debugfs = debugfs_create_dir("sgmcu", NULL);
> + return i2c_add_driver(&sg2042_mcu_driver);
> +}
> +
> +static void __exit sg2042_mcu_exit(void)
> +{
> + debugfs_remove_recursive(sgmcu_debugfs);
> + i2c_del_driver(&sg2042_mcu_driver);
> +}
> +
> +module_init(sg2042_mcu_init);
> +module_exit(sg2042_mcu_exit);
> +
> +MODULE_AUTHOR("Inochi Amaoto <inochiama at outlook.com>");
> +MODULE_DESCRIPTION("MCU I2C driver for SG2042 soc platform");
> +MODULE_LICENSE("GPL");
> --
> 2.45.2
>
More information about the linux-riscv
mailing list