[PATCH RFC v4 13/15] ACPI: add support to (un)register CPUs based on the _STA enabled bit
Russell King (Oracle)
rmk+kernel at armlinux.org.uk
Wed Jan 31 08:50:43 PST 2024
From: James Morse <james.morse at arm.com>
acpi_processor_get_info() registers all present CPUs. Registering a
CPU is what creates the sysfs entries and triggers the udev
notifications.
arm64 virtual machines that support 'virtual cpu hotplug' use the
enabled bit to indicate whether the CPU can be brought online, as
the existing ACPI tables require all hardware to be described and
present.
If firmware describes a CPU as present, but disabled, skip the
registration. Such CPUs are present, but can't be brought online for
whatever reason. (e.g. firmware/hypervisor policy).
Once firmware sets the enabled bit, the CPU can be registered and
brought online by user-space. Online CPUs, or CPUs that are missing
an _STA method must always be registered.
When firmware clears the enabled bit, we need to unregister the CPU
for symetry. As this is dependent on hotplug CPU being support, and
arch_unregister_cpu() only exists when hotplug CPU is supported,
we need to add a check for that configuration symbol.
Signed-off-by: James Morse <james.morse at arm.com>
Tested-by: Miguel Luis <miguel.luis at oracle.com>
Tested-by: Vishnu Pajjuri <vishnu at os.amperecomputing.com>
Tested-by: Jianyong Wu <jianyong.wu at arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
Changes since RFC v3 (smaller series):
* Squash "ACPI: processor: Only call arch_unregister_cpu() if
HOTPLUG_CPU is selected" into this patch.
---
drivers/acpi/acpi_processor.c | 33 +++++++++++++++++++++++++++++++--
1 file changed, 31 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
index d1d33e74216c..5e641180c45a 100644
--- a/drivers/acpi/acpi_processor.c
+++ b/drivers/acpi/acpi_processor.c
@@ -228,6 +228,32 @@ static int acpi_processor_make_present(struct acpi_processor *pr)
return ret;
}
+static int acpi_processor_make_enabled(struct acpi_processor *pr)
+{
+ unsigned long long sta;
+ acpi_status status;
+ bool present, enabled;
+
+ if (!acpi_has_method(pr->handle, "_STA"))
+ return arch_register_cpu(pr->id);
+
+ status = acpi_evaluate_integer(pr->handle, "_STA", NULL, &sta);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ present = sta & ACPI_STA_DEVICE_PRESENT;
+ enabled = sta & ACPI_STA_DEVICE_ENABLED;
+
+ if (cpu_online(pr->id) && (!present || !enabled)) {
+ pr_err_once(FW_BUG "CPU %u is online, but described as not present or disabled!\n", pr->id);
+ add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
+ } else if (!present || !enabled) {
+ return -ENODEV;
+ }
+
+ return arch_register_cpu(pr->id);
+}
+
static int acpi_processor_get_info(struct acpi_device *device)
{
union acpi_object object = { 0 };
@@ -318,7 +344,7 @@ static int acpi_processor_get_info(struct acpi_device *device)
*/
if (!invalid_logical_cpuid(pr->id) && cpu_present(pr->id) &&
!get_cpu_device(pr->id)) {
- int ret = arch_register_cpu(pr->id);
+ int ret = acpi_processor_make_enabled(pr);
if (ret)
return ret;
@@ -511,7 +537,7 @@ static void acpi_processor_post_eject(struct acpi_device *device)
unsigned long long sta;
acpi_status status;
- if (!device)
+ if (!IS_ENABLED(CONFIG_HOTPLUG_CPU) || !device)
return;
pr = acpi_driver_data(device);
@@ -526,6 +552,9 @@ static void acpi_processor_post_eject(struct acpi_device *device)
acpi_processor_make_not_present(device);
return;
}
+
+ if (cpu_present(pr->id) && !(sta & ACPI_STA_DEVICE_ENABLED))
+ arch_unregister_cpu(pr->id);
}
#ifdef CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC
--
2.30.2
More information about the linux-riscv
mailing list