[v2] riscv: dts: starfive: jh7110: Add camera subsystem nodes

[Conor Dooley]

On Tue, Jan 30, 2024 at 12:25:09AM -0800, Changhuang Liang wrote:
> Add camera subsystem nodes for the StarFive JH7110 SoC. They contain the
> imx219, dphy-rx, csi2rx, camss nodes.
> 
> Signed-off-by: Changhuang Liang <changhuang.liang at starfivetech.com>
> ---
>  .../jh7110-starfive-visionfive-2.dtsi         | 103 ++++++++++++++++++
>  arch/riscv/boot/dts/starfive/jh7110.dtsi      |  67 ++++++++++++
>  2 files changed, 170 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> index b89e9791efa7..e0027bb379ef 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> @@ -30,6 +30,37 @@ cpus {
>  		timebase-frequency = <4000000>;
>  	};
>  
> +	imx219_clk: imx219-clock {
> +		compatible = "fixed-clock";
> +		clock-output-names = "imx219_clk";
> +		clock-frequency = <24000000>;
> +		#clock-cells = <0>;
> +	};

Why do you need an output name here?
Also, where does this clock come from? Is it an oscillator on the board?

> +	imx219_vana_2v8: 2p8v {

For all of these regulators, please put "regular-" as a prefix for the
node names.

Cheers,
Conor.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20240131/9e760fb2/attachment.sig>