[PATCH v3 4/6] riscv: dts: starfive: visionfive 2: use cpus label for timebase freq

[Jisheng Zhang]

As pointed out by Krzysztof "Board should not bring new CPU nodes.
Override by label instead."

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
Signed-off-by: Jisheng Zhang <jszhang at kernel.org>
---
 .../boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi   | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 11db93966dd6..974851a764e1 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -26,10 +26,6 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	cpus {
-		timebase-frequency = <4000000>;
-	};
-
 	memory at 40000000 {
 		device_type = "memory";
 		reg = <0x0 0x40000000 0x1 0x0>;
@@ -69,6 +65,10 @@ codec {
 	};
 };
 
+&cpus {
+	timebase-frequency = <4000000>;
+};
+
 &dvp_clk {
 	clock-frequency = <74250000>;
 };
-- 
2.43.0