[PATCH v6 2/4] pinctrl: renesas: rzg2l: Include pinmap in RZG2L_GPIO_PORT_PACK() macro

[Geert Uytterhoeven]

On Mon, Jan 29, 2024 at 2:56 PM Prabhakar <prabhakar.csengg at gmail.com> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
>
> Currently we assume all the port pins are sequential ie always PX_0 to
> PX_n (n=1..7) exist, but on RZ/Five SoC we have additional pins P19_1 to
> P28_5 which have holes in them, for example only one pin on port19 is
> available and that is P19_1 and not P19_0. So to handle such cases
> include pinmap for each port which would indicate the pin availability
> on each port. As the pincount can be calculated based on pinmap drop this
> from RZG2L_GPIO_PORT_PACK() macro.
>
> Previously we had a max of 7 pins on each port but on RZ/Five Port-20
> has 8 pins, so move the single pin configuration to BIT(63).
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
i.e. will queue in renesas-pinctrl for v6.9.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds