[PATCH v14,RESEND 19/22] dt-bindings: PCI: Add StarFive JH7110 PCIe controller

[Rob Herring]

On Mon, 29 Jan 2024 09:01:39 +0800, Minda Chen wrote:
> Add StarFive JH7110 SoC PCIe controller dt-bindings. JH7110 using PLDA
> XpressRICH PCIe host controller IP.
> 
> Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
> Reviewed-by: Hal Feng <hal.feng at starfivetech.com>
> Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
> Reviewed-by: Rob Herring <robh at kernel.org>
> ---
>  .../bindings/pci/starfive,jh7110-pcie.yaml    | 120 ++++++++++++++++++
>  1 file changed, 120 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml:
Error in referenced schema matching $id: http://devicetree.org/schemas/pci/plda,xpressrich3-axi-common.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.example.dtb: pcie at 940000000: False schema does not allow {'compatible': ['starfive,jh7110-pcie'], 'reg': [[9, 1073741824, 0, 268435456], [0, 721420288, 0, 16777216]], 'reg-names': ['cfg', 'apb'], '#address-cells': [[3]], '#size-cells': [[2]], '#interrupt-cells': [[1]], 'device_type': ['pci'], 'ranges': [[2181038080, 0, 805306368, 0, 805306368, 0, 134217728], [3271557120, 9, 0, 9, 0, 0, 1073741824]], 'starfive,stg-syscon': [[4294967295]], 'bus-range': [[0, 255]], 'interrupts': [[56]], 'interrupt-map-mask': [[0, 0, 0, 7]], 'interrupt-map': [[0, 0, 0, 1, 2, 1], [0, 0, 0, 2, 2, 2], [0, 0, 0, 3, 2, 3], [0, 0, 0, 4, 2, 4]], 'msi-controller': True, 'clocks': [[4294967295, 86], [4294967295, 10], [4294967295, 8], [4294967295, 9]], 'clock-names': ['noc', 'tl', 'axi_mst0', 'apb'], 'resets': [[4294967295, 11], [4294967295, 12], [4294967295, 13], [4294967295, 14], [4294967295, 15], [4294967295, 16]], 
 'perst-gpios': [[4294967295, 26, 1]], 'phys': [[4294967295]], 'interrupt-controller': {'#address-cells': [[0]], '#interrupt-cells': [[1]], 'interrupt-controller': True, 'phandle': [[2]]}, '$nodename': ['pcie at 940000000']}
	from schema $id: http://devicetree.org/schemas/pci/starfive,jh7110-pcie.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.example.dtb: pcie at 940000000: Unevaluated properties are not allowed ('#address-cells', '#interrupt-cells', '#size-cells', 'bus-range', 'device_type', 'interrupt-controller', 'interrupt-map', 'interrupt-map-mask', 'interrupts', 'msi-controller', 'ranges', 'reg', 'reg-names' were unexpected)
	from schema $id: http://devicetree.org/schemas/pci/starfive,jh7110-pcie.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240129010142.3732-4-minda.chen@starfivetech.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.