[PATCH 0/5] Add IAX45 support for RZ/Five SoC

Prabhakar prabhakar.csengg at gmail.com
Mon Jan 29 07:16:13 PST 2024


From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>

Hi All,

The IAX45 block on RZ/Five SoC is almost identical to the IRQC bock found
on the RZ/G2L family of SoCs.

IAX45 performs various interrupt controls including synchronization for the
external interrupts of NMI, IRQ, and GPIOINT and the interrupts of the
built-in peripheral interrupts output by each module. And it notifies the
interrupt to the PLIC.
- Select 32 TINT from 82 GPIOINT.
- Integration of bus error interrupts from system bus.
- Integration of ECC error interrupts from On-chip RAM.
- Indicate interrupt status. (NMI, IRQ, TINT, integrated bus error interrupt
  and integrated ECC error interrupt)
- Setting of interrupt detection method. (NMI, IRQ and TINT)
- All interrupts are masked by INTMASK.
- Mask function for NMI, IRQ and TINT

This patch series adds support for IAX45 in the IRQC driver and enables this
on RZ/Five SoC.

Cheers,
Prabhakar

Lad Prabhakar (5):
  dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document
    RZ/Five SoC
  irqchip/renesas-rzg2l: Add support for RZ/Five SoC
  riscv: dts: renesas: r9a07g043f: Add IRQC node to RZ/Five SoC DTSI
  arm64: dts: renesas: r9a07g043: Move interrupt-parent property to
    common DTSI
  riscv: dts: renesas: rzfive-smarc-som: Drop deleting interrupt
    properties from ETH0/1 nodes

 .../renesas,rzg2l-irqc.yaml                   |  27 ++++
 arch/arm64/boot/dts/renesas/r9a07g043.dtsi    |   1 +
 arch/arm64/boot/dts/renesas/r9a07g043u.dtsi   |   4 -
 arch/riscv/boot/dts/renesas/r9a07g043f.dtsi   |  76 ++++++++++
 .../boot/dts/renesas/rzfive-smarc-som.dtsi    |  16 ---
 drivers/irqchip/irq-renesas-rzg2l.c           | 132 +++++++++++++++++-
 6 files changed, 232 insertions(+), 24 deletions(-)

-- 
2.34.1




More information about the linux-riscv mailing list