[PATCH v2 2/7] dt-bindings: can: mpfs: add missing required clock

[Conor Dooley]

From: Conor Dooley <conor.dooley at microchip.com>

The CAN controller on PolarFire SoC has an AHB peripheral clock _and_ a
CAN bus clock. The bus clock was omitted when the binding was written,
but is required for operation. Make up for lost time and add it.

Cautionary tale in adding bindings without having implemented a real
user for them perhaps.

Fixes: c878d518d7b6 ("dt-bindings: can: mpfs: document the mpfs CAN controller")
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
 .../devicetree/bindings/net/can/microchip,mpfs-can.yaml     | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
index 45aa3de7cf01..01e4d4a54df6 100644
--- a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
+++ b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
@@ -24,7 +24,9 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    items:
+      - description: AHB peripheral clock
+      - description: CAN bus clock
 
 required:
   - compatible
@@ -39,7 +41,7 @@ examples:
     can at 2010c000 {
         compatible = "microchip,mpfs-can";
         reg = <0x2010c000 0x1000>;
-        clocks = <&clkcfg 17>;
+        clocks = <&clkcfg 17>, <&clkcfg 37>;
         interrupt-parent = <&plic>;
         interrupts = <56>;
     };
-- 
2.43.0