[PATCH V2 1/3] riscv: Add Zicbop instruction definitions & cpufeature
Conor Dooley
conor at kernel.org
Thu Jan 11 03:12:33 PST 2024
On Thu, Jan 11, 2024 at 11:49:48AM +0100, Clément Léger wrote:
>
>
> On 11/01/2024 11:45, Andrew Jones wrote:
> > On Thu, Jan 11, 2024 at 11:31:32AM +0100, Clément Léger wrote:
> >>
> >>
> >> On 03/01/2024 13:00, Andrew Jones wrote:
> >>> On Wed, Jan 03, 2024 at 10:31:37AM +0100, Clément Léger wrote:
> >>>>
> >>>>
> >>>> On 31/12/2023 09:29, guoren at kernel.org wrote:
> >>>>> From: Guo Ren <guoren at linux.alibaba.com>
> >>>>>
> >>>>> Cache-block prefetch instructions are HINTs to the hardware to
> >>>>> indicate that software intends to perform a particular type of
> >>>>> memory access in the near future. This patch adds prefetch.i,
> >>>>> prefetch.r and prefetch.w instruction definitions by
> >>>>> RISCV_ISA_EXT_ZICBOP cpufeature.
> >>>>>
> >>>>> Signed-off-by: Guo Ren <guoren at linux.alibaba.com>
> >>>>> Signed-off-by: Guo Ren <guoren at kernel.org>
> >>>>> ---
> >>>>> arch/riscv/Kconfig | 15 ++++++++
> >>>>> arch/riscv/include/asm/hwcap.h | 1 +
> >>>>> arch/riscv/include/asm/insn-def.h | 60 +++++++++++++++++++++++++++++++
> >>>>> arch/riscv/kernel/cpufeature.c | 1 +
> >>>>> 4 files changed, 77 insertions(+)
> >>>>>
> >>>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> >>>>> index 24c1799e2ec4..fcbd417d65ea 100644
> >>>>> --- a/arch/riscv/Kconfig
> >>>>> +++ b/arch/riscv/Kconfig
> >>>>> @@ -579,6 +579,21 @@ config RISCV_ISA_ZICBOZ
> >>>>>
> >>>>> If you don't know what to do here, say Y.
> >>>>>
> >>>>> +config RISCV_ISA_ZICBOP
> >>>>> + bool "Zicbop extension support for cache block prefetch"
> >>>>> + depends on MMU
> >>>>> + depends on RISCV_ALTERNATIVE
> >>>>> + default y
> >>>>> + help
> >>>>> + Adds support to dynamically detect the presence of the ZICBOP
> >>>>> + extension (Cache Block Prefetch Operations) and enable its
> >>>>> + usage.
> >>>>> +
> >>>>> + The Zicbop extension can be used to prefetch cache block for
> >>>>> + read/write fetch.
> >>>>> +
> >>>>> + If you don't know what to do here, say Y.
> >>>>> +
> >>>>> config TOOLCHAIN_HAS_ZIHINTPAUSE
> >>>>> bool
> >>>>> default y
> >>>>> diff --git a/arch/riscv/include/asm/hwcap.h b/arch/riscv/include/asm/hwcap.h
> >>>>> index 06d30526ef3b..77d3b6ee25ab 100644
> >>>>> --- a/arch/riscv/include/asm/hwcap.h
> >>>>> +++ b/arch/riscv/include/asm/hwcap.h
> >>>>> @@ -57,6 +57,7 @@
> >>>>> #define RISCV_ISA_EXT_ZIHPM 42
> >>>>> #define RISCV_ISA_EXT_SMSTATEEN 43
> >>>>> #define RISCV_ISA_EXT_ZICOND 44
> >>>>> +#define RISCV_ISA_EXT_ZICBOP 45
> >>>>
> >>>> Hi Guo,
> >>>>
> >>>> Since you are adding support for the Zicbop extension, you could
> >>>> probably also allow to probe it from userspace using hwprobe. Add a few
> >>>> definitions to sys_riscv.c/hwprobe.h and it will be fine.
> >>>
> >>> To expose to userspace, we should also start parsing the block size,
> >>> so it can also be exposed to userspace. Starting to parse the block
> >>> size first requires that we decide we need to parse the block size
> >>> (see [1]).
> >>
> >> Hi Andrew, thanks for the thread.
> >>
> >> I read it (and the other ones that are related to it) and basically, it
> >> seems there was a first decision (expose Zicbop block size indivudally)
> >> due to the fact the specification did not mentioned anything specific
> >> about clock sizes but then after that, there was a clarification in the
> >> spec stating that Zicbop and Zicbom have the same block size so the
> >> first decision was questioned again.
> >>
> >> From a user coherency point of view, I think it would make more sense to
> >> expose it individually in hwprobe so that zicboz, zicbop and zicbom
> >> have their "own" block size (even though zicbop and zicbom would use the
> >> same one). Moreover, it would allow us for future evolution easily
> >> without breaking any userspace later if zicbop and zicbom block size are
> >> decoupled.
> >
> > I agree and QEMU has already headed down the road of generating
> > riscv,cbop-block-size (I guess Conor's ack on [1] was interpreted as
> > being sufficient to merge the QEMU bits), so we can add the Linux
> > support and test with QEMU now. The work could probably be a separate
> > series to this one, though.
>
> Yes, it QEMU had it merged. and agreed, since this requires a bit more
> plumbing, it can probably be left out of this series. I could probably
> take care of that later.
I think some crack slippage happened with that patch. I pinged Palmer
about it on irc.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20240111/17f5b8b2/attachment.sig>
More information about the linux-riscv
mailing list