[PATCH v7 2/4] dt-bindings: clock: sophgo: support SG2042

[Chen Wang]

On 2024/1/8 15:04, Krzysztof Kozlowski wrote:
> On 08/01/2024 07:49, Chen Wang wrote:
>> From: Chen Wang <unicorn_wang at outlook.com>
>>
>> Add bindings for the clock generator on the SG2042 RISC-V SoC.
>>
>> Signed-off-by: Chen Wang <unicorn_wang at outlook.com>
>> Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
>> ---
>>   .../bindings/clock/sophgo,sg2042-clkgen.yaml  |  53 ++++++
>>   .../dt-bindings/clock/sophgo,sg2042-clkgen.h  | 169 ++++++++++++++++++
>>   2 files changed, 222 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/clock/sophgo,sg2042-clkgen.yaml
>>   create mode 100644 include/dt-bindings/clock/sophgo,sg2042-clkgen.h
>>
>> diff --git a/Documentation/devicetree/bindings/clock/sophgo,sg2042-clkgen.yaml b/Documentation/devicetree/bindings/clock/sophgo,sg2042-clkgen.yaml
>> new file mode 100644
>> index 000000000000..f9935e66fc95
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/sophgo,sg2042-clkgen.yaml
>> @@ -0,0 +1,53 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/clock/sophgo,sg2042-clkgen.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Sophgo SG2042 Clock Generator
>> +
>> +maintainers:
>> +  - Chen Wang <unicorn_wang at outlook.com>
>> +
>> +properties:
>> +  compatible:
>> +    const: sophgo,sg2042-clkgen
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  sophgo,system-ctrl:
>> +    $ref: /schemas/types.yaml#/definitions/phandle
>> +    description:
>> +      Phandle to SG2042 System Controller node. On SG2042, part of control
>> +      registers of Clock Controller are defined in System controller. Clock
>> +      driver will use this phandle to get the register map base to plus the
>> +      offset of the registers to access them.
> Do not describe the driver, but hardware. What registers are in
> system-ctrl? What are their purpose? Why this hardware needs them?
Understood, will fix the words in revision, thanks.
>
>
>
> Best regards,
> Krzysztof
>