[PATCH v14 07/22] PCI: microchip: Rename two setup functions
Minda Chen
minda.chen at starfivetech.com
Mon Jan 8 03:05:57 PST 2024
Rename two setup functions to plda prefix. Prepare to re-use these two
setup function.
For two setup functions names are similar, rename mc_pcie_setup_windows()
to plda_pcie_setup_iomems().
Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
---
.../pci/controller/plda/pcie-microchip-host.c | 24 +++++++++----------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index a554a56cc0e8..9b367927cd32 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -838,9 +838,9 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
return mc_allocate_msi_domains(port);
}
-static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
- phys_addr_t axi_addr, phys_addr_t pci_addr,
- size_t size)
+static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
+ phys_addr_t axi_addr, phys_addr_t pci_addr,
+ size_t size)
{
u32 atr_sz = ilog2(size) - 1;
u32 val;
@@ -876,8 +876,8 @@ static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
}
-static int mc_pcie_setup_windows(struct platform_device *pdev,
- struct plda_pcie_rp *port)
+static int plda_pcie_setup_iomems(struct platform_device *pdev,
+ struct plda_pcie_rp *port)
{
void __iomem *bridge_base_addr = port->bridge_addr;
struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
@@ -888,9 +888,9 @@ static int mc_pcie_setup_windows(struct platform_device *pdev,
resource_list_for_each_entry(entry, &bridge->windows) {
if (resource_type(entry->res) == IORESOURCE_MEM) {
pci_addr = entry->res->start - entry->offset;
- mc_pcie_setup_window(bridge_base_addr, index,
- entry->res->start, pci_addr,
- resource_size(entry->res));
+ plda_pcie_setup_window(bridge_base_addr, index,
+ entry->res->start, pci_addr,
+ resource_size(entry->res));
index++;
}
}
@@ -1023,15 +1023,15 @@ static int mc_platform_init(struct pci_config_window *cfg)
int ret;
/* Configure address translation table 0 for PCIe config space */
- mc_pcie_setup_window(bridge_base_addr, 0, cfg->res.start,
- cfg->res.start,
- resource_size(&cfg->res));
+ plda_pcie_setup_window(bridge_base_addr, 0, cfg->res.start,
+ cfg->res.start,
+ resource_size(&cfg->res));
/* Need some fixups in config space */
mc_pcie_enable_msi(port, cfg->win);
/* Configure non-config space outbound ranges */
- ret = mc_pcie_setup_windows(pdev, &port->plda);
+ ret = plda_pcie_setup_iomems(pdev, &port->plda);
if (ret)
return ret;
--
2.17.1
More information about the linux-riscv
mailing list