[PATCH v4 09/12] riscv: mm: Use a fixed layout for the MM context ID
Alexandre Ghiti
alexghiti at rivosinc.com
Thu Jan 4 04:42:55 PST 2024
On Tue, Jan 2, 2024 at 11:01 PM Samuel Holland
<samuel.holland at sifive.com> wrote:
>
> Currently, the size of the ASID field in the MM context ID dynamically
> depends on the number of hardware-supported ASID bits. This requires
> reading a global variable to extract either field from the context ID.
> Instead, allocate the maximum possible number of bits to the ASID field,
> so the layout of the context ID is known at compile-time.
>
> Signed-off-by: Samuel Holland <samuel.holland at sifive.com>
> ---
>
> (no changes since v1)
>
> arch/riscv/include/asm/mmu.h | 4 ++--
> arch/riscv/include/asm/tlbflush.h | 2 --
> arch/riscv/mm/context.c | 6 ++----
> 3 files changed, 4 insertions(+), 8 deletions(-)
>
> diff --git a/arch/riscv/include/asm/mmu.h b/arch/riscv/include/asm/mmu.h
> index a550fbf770be..dc0273f7905f 100644
> --- a/arch/riscv/include/asm/mmu.h
> +++ b/arch/riscv/include/asm/mmu.h
> @@ -26,8 +26,8 @@ typedef struct {
> #endif
> } mm_context_t;
>
> -#define cntx2asid(cntx) ((cntx) & asid_mask)
> -#define cntx2version(cntx) ((cntx) & ~asid_mask)
> +#define cntx2asid(cntx) ((cntx) & SATP_ASID_MASK)
> +#define cntx2version(cntx) ((cntx) & ~SATP_ASID_MASK)
>
> void __init create_pgd_mapping(pgd_t *pgdp, uintptr_t va, phys_addr_t pa,
> phys_addr_t sz, pgprot_t prot);
> diff --git a/arch/riscv/include/asm/tlbflush.h b/arch/riscv/include/asm/tlbflush.h
> index d9913590f82e..5bfd37cfd8c3 100644
> --- a/arch/riscv/include/asm/tlbflush.h
> +++ b/arch/riscv/include/asm/tlbflush.h
> @@ -15,8 +15,6 @@
> #define FLUSH_TLB_NO_ASID ((unsigned long)-1)
>
> #ifdef CONFIG_MMU
> -extern unsigned long asid_mask;
> -
> static inline void local_flush_tlb_all(void)
> {
> __asm__ __volatile__ ("sfence.vma" : : : "memory");
> diff --git a/arch/riscv/mm/context.c b/arch/riscv/mm/context.c
> index 43d005f63253..b5170ac1b742 100644
> --- a/arch/riscv/mm/context.c
> +++ b/arch/riscv/mm/context.c
> @@ -22,7 +22,6 @@ DEFINE_STATIC_KEY_FALSE(use_asid_allocator);
>
> static unsigned long asid_bits;
> static unsigned long num_asids;
> -unsigned long asid_mask;
>
> static atomic_long_t current_version;
>
> @@ -128,7 +127,7 @@ static unsigned long __new_context(struct mm_struct *mm)
> goto set_asid;
>
> /* We're out of ASIDs, so increment current_version */
> - ver = atomic_long_add_return_relaxed(num_asids, ¤t_version);
> + ver = atomic_long_add_return_relaxed(BIT(SATP_ASID_BITS), ¤t_version);
>
> /* Flush everything */
> __flush_context();
> @@ -247,7 +246,6 @@ static int __init asids_init(void)
> /* Pre-compute ASID details */
> if (asid_bits) {
> num_asids = 1 << asid_bits;
> - asid_mask = num_asids - 1;
> }
>
> /*
> @@ -255,7 +253,7 @@ static int __init asids_init(void)
> * at-least twice more than CPUs
> */
> if (num_asids > (2 * num_possible_cpus())) {
> - atomic_long_set(¤t_version, num_asids);
> + atomic_long_set(¤t_version, BIT(SATP_ASID_BITS));
>
> context_asid_map = bitmap_zalloc(num_asids, GFP_KERNEL);
> if (!context_asid_map)
> --
> 2.42.0
>
You can add:
Reviewed-by: Alexandre Ghiti <alexghiti at rivosinc.com>
Thanks,
Alex
More information about the linux-riscv
mailing list