[PATCH v3 0/2] riscv: pwm: sophgo: add pwm support for CV1800

[Jingbao Qiu]

The Sophgo CV1800 chip provides a set of four independent
PWM channel outputs.
This series adds PWM controller support for Sophgo cv1800.

Changes since v2:
- use 0x08 instead of macro
- split if statements based on conditions
- in order to round up, first calculate the
  number of high-level cycles, then subtract
  it from the PERIOD to obtain the number of HLPERIOD
- use new pwmchip_alloc() API instead of old style

v2: https://lore.kernel.org/all/20240212121729.1086718-1-qiujingbao.dlmu@gmail.com/

Changes since v1:
- drop full stop from subject
- re-order maintainers and description
- pass checkpatch.pl --strict
- fix naming errors
- add "Limitations" section
- use a driver specific prefix for all defines
- using bool instead u32 in cv1800_pwm_enable
- check and set state->polarity
- use mul_u64_u64_div_u64
- use clk_rate_exclusive_get(), balance with clk_rate_exclusive_put()
- using macro definitions instead of shift operations
- remove shift operation on 0
- use priv replace cv_pwm 
- hardcode npwm
- set atomic to true
- remove MODULE_ALIAS

v1: https://lore.kernel.org/all/20240207055856.672184-1-qiujingbao.dlmu@gmail.com/

Jingbao Qiu (2):
  dt-bindings: pwm: sophgo: add pwm for Sophgo CV1800 series SoC
  pwm: sophgo: add pwm support for Sophgo CV1800 SoC

 .../bindings/pwm/sophgo,cv1800-pwm.yaml       |  45 +++
 drivers/pwm/Kconfig                           |  10 +
 drivers/pwm/Makefile                          |   1 +
 drivers/pwm/pwm-cv1800.c                      | 259 ++++++++++++++++++
 4 files changed, 315 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/sophgo,cv1800-pwm.yaml
 create mode 100644 drivers/pwm/pwm-cv1800.c


base-commit: 801de0882d8a95aa1b1fe67df1696e037d785656
-- 
2.25.1