[PATCH v14 12/18] irqchip/riscv-imsic: Add device MSI domain support for platform devices
Anup Patel
anup at brainfault.org
Thu Feb 22 05:44:43 PST 2024
On Thu, Feb 22, 2024 at 6:45 PM Björn Töpel <bjorn at kernel.org> wrote:
>
> Anup Patel <apatel at ventanamicro.com> writes:
>
> > The Linux platform MSI support allows per-device MSI domains so add
> > a platform irqchip driver for RISC-V IMSIC which provides a base IRQ
> > domain with MSI parent support for platform device domains.
> >
> > The IMSIC platform driver assumes that the IMSIC state is already
> > initialized by the IMSIC early driver.
> >
> > Signed-off-by: Anup Patel <apatel at ventanamicro.com>
> > ---
> > drivers/irqchip/Makefile | 2 +-
> > drivers/irqchip/irq-riscv-imsic-platform.c | 344 +++++++++++++++++++++
> > drivers/irqchip/irq-riscv-imsic-state.h | 1 +
> > 3 files changed, 346 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/irqchip/irq-riscv-imsic-platform.c
> >
> > diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> > index d714724387ce..abca445a3229 100644
> > --- a/drivers/irqchip/Makefile
> > +++ b/drivers/irqchip/Makefile
> > @@ -95,7 +95,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o
> > obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o
> > obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
> > obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o
> > -obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic-state.o irq-riscv-imsic-early.o
> > +obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic-state.o irq-riscv-imsic-early.o irq-riscv-imsic-platform.o
> > obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
> > obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
> > obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.o
> > diff --git a/drivers/irqchip/irq-riscv-imsic-platform.c b/drivers/irqchip/irq-riscv-imsic-platform.c
> > new file mode 100644
> > index 000000000000..e2344fc08dca
> > --- /dev/null
> > +++ b/drivers/irqchip/irq-riscv-imsic-platform.c
> > @@ -0,0 +1,344 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2021 Western Digital Corporation or its affiliates.
> > + * Copyright (C) 2022 Ventana Micro Systems Inc.
> > + */
> > +
> > +#define pr_fmt(fmt) "riscv-imsic: " fmt
> > +#include <linux/bitmap.h>
> > +#include <linux/cpu.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/irq.h>
> > +#include <linux/irqchip.h>
> > +#include <linux/irqdomain.h>
> > +#include <linux/module.h>
> > +#include <linux/msi.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/spinlock.h>
> > +#include <linux/smp.h>
> > +
> > +#include "irq-riscv-imsic-state.h"
> > +
> > +static bool imsic_cpu_page_phys(unsigned int cpu, unsigned int guest_index,
> > + phys_addr_t *out_msi_pa)
> > +{
> > + struct imsic_global_config *global;
> > + struct imsic_local_config *local;
> > +
> > + global = &imsic->global;
> > + local = per_cpu_ptr(global->local, cpu);
> > +
> > + if (BIT(global->guest_index_bits) <= guest_index)
> > + return false;
> > +
> > + if (out_msi_pa)
> > + *out_msi_pa = local->msi_pa +
> > + (guest_index * IMSIC_MMIO_PAGE_SZ);
>
> Nit: And one more redundant parenthesis and 100 char! ;-)
Ahh, I missed updating this line. I will update in the next revision.
Regards,
Anup
More information about the linux-riscv
mailing list