[PATCH v14 13/18] irqchip/riscv-imsic: Add device MSI domain support for PCI devices

Björn Töpel bjorn at kernel.org
Thu Feb 22 05:14:51 PST 2024


Anup Patel <apatel at ventanamicro.com> writes:

> The Linux PCI framework supports per-device MSI domains for PCI devices
> so extend the IMSIC driver to allow PCI per-device MSI domains.
>
> Signed-off-by: Anup Patel <apatel at ventanamicro.com>
> ---
>  drivers/irqchip/Kconfig                    |  7 +++++
>  drivers/irqchip/irq-riscv-imsic-platform.c | 35 ++++++++++++++++++++--
>  2 files changed, 40 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 85f86e31c996..2fc0cb32341a 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -553,6 +553,13 @@ config RISCV_IMSIC
>  	select GENERIC_IRQ_MATRIX_ALLOCATOR
>  	select GENERIC_MSI_IRQ
>  
> +config RISCV_IMSIC_PCI
> +	bool
> +	depends on RISCV_IMSIC
> +	depends on PCI
> +	depends on PCI_MSI
> +	default RISCV_IMSIC
> +
>  config EXYNOS_IRQ_COMBINER
>  	bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST
>  	depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST
> diff --git a/drivers/irqchip/irq-riscv-imsic-platform.c b/drivers/irqchip/irq-riscv-imsic-platform.c
> index e2344fc08dca..90ddcdd0bba5 100644
> --- a/drivers/irqchip/irq-riscv-imsic-platform.c
> +++ b/drivers/irqchip/irq-riscv-imsic-platform.c
> @@ -14,6 +14,7 @@
>  #include <linux/irqdomain.h>
>  #include <linux/module.h>
>  #include <linux/msi.h>
> +#include <linux/pci.h>
>  #include <linux/platform_device.h>
>  #include <linux/spinlock.h>
>  #include <linux/smp.h>
> @@ -208,6 +209,28 @@ static const struct irq_domain_ops imsic_base_domain_ops = {
>  #endif
>  };
>  
> +#ifdef CONFIG_RISCV_IMSIC_PCI
> +
> +static void imsic_pci_mask_irq(struct irq_data *d)
> +{
> +	pci_msi_mask_irq(d);
> +	irq_chip_mask_parent(d);
> +}
> +
> +static void imsic_pci_unmask_irq(struct irq_data *d)
> +{
> +	irq_chip_unmask_parent(d);
> +	pci_msi_unmask_irq(d);
> +}
> +
> +#define MATCH_PCI_MSI		BIT(DOMAIN_BUS_PCI_MSI)
> +
> +#else
> +
> +#define MATCH_PCI_MSI		0
> +
> +#endif
> +
>  static bool imsic_init_dev_msi_info(struct device *dev,
>  				    struct irq_domain *domain,
>  				    struct irq_domain *real_parent,
> @@ -231,6 +254,13 @@ static bool imsic_init_dev_msi_info(struct device *dev,
>  
>  	/* Is the target supported? */
>  	switch (info->bus_token) {
> +#ifdef CONFIG_RISCV_IMSIC_PCI
> +	case DOMAIN_BUS_PCI_DEVICE_MSI:
> +	case DOMAIN_BUS_PCI_DEVICE_MSIX:
> +		info->chip->irq_mask = imsic_pci_mask_irq;
> +		info->chip->irq_unmask = imsic_pci_unmask_irq;

irq_set_affinity()?


Björn



More information about the linux-riscv mailing list