[RFC PATCH 0/1] riscv: dts: Allow BUILTIN_DTB for all socs
Yangyu Chen
cyy at cyyself.name
Tue Feb 20 11:01:53 PST 2024
The BUILTIN_DTB kernel feature on RISC-V only works on K210 SoC only. This
patch moved this configuration to entire riscv.
Although BUILTIN_DTB is not a good choice for most platforms, it is likely
to be a debug feature when some bootloader will always override something
like the memory node in the device tree to adjust the memory size from SPD
or configuration resistor, which makes it hard to do some debugging. As an
example, some platforms with numa like sg2042 only support sv39 will fail
to boot when there is no ZONE_HIGHMEM patch with 128G memory. If we want
a kernel without this patch to boot, we need to write the memory nodes
in the DT manually.
Also, changing DT on some platforms is not easy. For Milk-V Pioneer, the
boot procedure is ZSBL -> OpenSBI -> LinuxBoot -> Linux. If DT gets
changed, OpenSBI or LinuxBoot may refuse to boot. And there is some bug on
LinuxBoot now which does not consume --dtb argument on kexec and always
uses DT from memory. So I would like to do debugging on DT using
BUILTIN_DTB, which makes it very simple, I can even install the kernel in
the distro's way and provide a kernel package for other users to test.
Yangyu Chen (1):
riscv: dts: Allow BUILTIN_DTB for all socs
arch/riscv/Kconfig | 16 ++++++++++++++-
arch/riscv/Kconfig.socs | 32 -----------------------------
arch/riscv/boot/dts/Makefile | 2 +-
arch/riscv/boot/dts/canaan/Makefile | 2 --
4 files changed, 16 insertions(+), 36 deletions(-)
--
2.43.0
More information about the linux-riscv
mailing list