[PATCH v13 10/13] irqchip: Add RISC-V advanced PLIC driver for direct-mode

Thomas Gleixner tglx at linutronix.de
Tue Feb 20 05:40:56 PST 2024


On Tue, Feb 20 2024 at 11:37, Anup Patel wrote:
> +/*
> + * To handle an APLIC direct interrupts, we just read the CLAIMI register
> + * which will return highest priority pending interrupt and clear the
> + * pending bit of the interrupt. This process is repeated until CLAIMI
> + * register return zero value.
> + */
> +static void aplic_direct_handle_irq(struct irq_desc *desc)
> +{
> +	struct aplic_idc *idc = this_cpu_ptr(&aplic_idcs);
> +	struct irq_domain *irqdomain = idc->direct->irqdomain;
> +	struct irq_chip *chip = irq_desc_get_chip(desc);
> +	irq_hw_number_t hw_irq;
> +	int irq;
> +
> +	chained_irq_enter(chip, desc);
> +
> +	while ((hw_irq = readl(idc->regs + APLIC_IDC_CLAIMI))) {
> +		hw_irq = hw_irq >> APLIC_IDC_TOPI_ID_SHIFT;
> +		irq = irq_find_mapping(irqdomain, hw_irq);
> +
> +		if (unlikely(irq <= 0))
> +			dev_warn_ratelimited(idc->direct->priv.dev,
> +					     "hw_irq %lu mapping not found\n", hw_irq);

Lacks brackets. See Documentation....

> +		else
> +			generic_handle_irq(irq);
> +	}
> +
> +static int aplic_direct_starting_cpu(unsigned int cpu)
> +{
> +	if (aplic_direct_parent_irq)
> +		enable_percpu_irq(aplic_direct_parent_irq,
> +				  irq_get_trigger_type(aplic_direct_parent_irq));

Ditto.

> +	return 0;
> +}

> +void aplic_init_hw_global(struct aplic_priv *priv, bool msi_mode)
> +{
> +	u32 val;
> +#ifdef CONFIG_RISCV_M_MODE
> +	u32 valH;

No camel case please.

> +
> +	if (msi_mode) {
> +		val = lower_32_bits(priv->msicfg.base_ppn);
> +		valH = FIELD_PREP(APLIC_xMSICFGADDRH_BAPPN, upper_32_bits(priv->msicfg.base_ppn));
> +		valH |= FIELD_PREP(APLIC_xMSICFGADDRH_LHXW, priv->msicfg.lhxw);
> +		valH |= FIELD_PREP(APLIC_xMSICFGADDRH_HHXW, priv->msicfg.hhxw);
> +		valH |= FIELD_PREP(APLIC_xMSICFGADDRH_LHXS, priv->msicfg.lhxs);
> +		valH |= FIELD_PREP(APLIC_xMSICFGADDRH_HHXS, priv->msicfg.hhxs);
> +		writel(val, priv->regs + APLIC_xMSICFGADDR);
> +		writel(valH, priv->regs + APLIC_xMSICFGADDRH);
> +	}

Thanks,

        tglx



More information about the linux-riscv mailing list