[PATCH v15 22/23] PCI: starfive: Offload the NVMe timeout workaround to host drivers.

[Minda Chen]

> 
> From: Kevin Xie <kevin.xie at starfivetech.com>
> 
> As the Starfive JH7110 hardware can't keep two inbound post write in order all
> the time, such as MSI messages and NVMe completions. If the NVMe
> completion update later than the MSI, an NVMe IRQ handle will miss.
> 
> As a workaround, we will wait a while before going to the generic handle here.
> 
> Verified with NVMe SSD, USB SSD, R8169 NIC.
> The performance are stable and even higher after this patch.
> 
> Signed-off-by: Kevin Xie <kevin.xie at starfivetech.com>
> Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
> ---
>  drivers/pci/controller/plda/pcie-plda-host.c | 12 ++++++++++++
>  drivers/pci/controller/plda/pcie-plda.h      |  1 +
>  drivers/pci/controller/plda/pcie-starfive.c  |  1 +
>  3 files changed, 14 insertions(+)
> 
> diff --git a/drivers/pci/controller/plda/pcie-plda-host.c
> b/drivers/pci/controller/plda/pcie-plda-host.c
> index a18923d7cea6..9e077ddf45c0 100644
> --- a/drivers/pci/controller/plda/pcie-plda-host.c
> +++ b/drivers/pci/controller/plda/pcie-plda-host.c
> @@ -13,6 +13,7 @@
>  #include <linux/msi.h>
>  #include <linux/pci_regs.h>
>  #include <linux/pci-ecam.h>
> +#include <linux/delay.h>
> 
>  #include "pcie-plda.h"
> 
> @@ -44,6 +45,17 @@ static void plda_handle_msi(struct irq_desc *desc)
>  			       bridge_base_addr + ISTATUS_LOCAL);
>  		status = readl_relaxed(bridge_base_addr + ISTATUS_MSI);
>  		for_each_set_bit(bit, &status, msi->num_vectors) {
> +			/*
> +			 * As the Starfive JH7110 hardware can't keep two
> +			 * inbound post write in order all the time, such as
> +			 * MSI messages and NVMe completions.
> +			 * If the NVMe completion update later than the MSI,
> +			 * an NVMe IRQ handle will miss.
> +			 * As a workaround, we will wait a while before
> +			 * going to the generic handle here.
> +			 */
> +			if (port->msi_quirk_delay_us)
> +				udelay(port->msi_quirk_delay_us);
>  			ret = generic_handle_domain_irq(msi->dev_domain, bit);
>  			if (ret)
>  				dev_err_ratelimited(dev, "bad MSI IRQ %d\n", diff --git
> a/drivers/pci/controller/plda/pcie-plda.h
> b/drivers/pci/controller/plda/pcie-plda.h
> index 04e385758a2f..feccf285dfe8 100644
> --- a/drivers/pci/controller/plda/pcie-plda.h
> +++ b/drivers/pci/controller/plda/pcie-plda.h
> @@ -186,6 +186,7 @@ struct plda_pcie_rp {
>  	int msi_irq;
>  	int intx_irq;
>  	int num_events;
> +	u16 msi_quirk_delay_us;
>  };
> 
>  struct plda_event {
> diff --git a/drivers/pci/controller/plda/pcie-starfive.c
> b/drivers/pci/controller/plda/pcie-starfive.c
> index 9bb9f0e29565..5cfc30572b7f 100644
> --- a/drivers/pci/controller/plda/pcie-starfive.c
> +++ b/drivers/pci/controller/plda/pcie-starfive.c
> @@ -391,6 +391,7 @@ static int starfive_pcie_probe(struct platform_device
> *pdev)
> 
>  	plda->host_ops = &sf_host_ops;
>  	plda->num_events = PLDA_MAX_EVENT_NUM;
> +	plda->msi_quirk_delay_us = 1;
>  	/* mask doorbell event */
>  	plda->events_bitmap = GENMASK(PLDA_INT_EVENT_NUM - 1, 0)
>  			     & ~BIT(PLDA_AXI_DOORBELL)
> --
> 2.17.1

Hi Kevin Hilman
   Will you try this series patch? Maybe this patch can fix the NVMe timeout print issue.
If this patch can fix it, please notify us. Thanks