[PATCH RFC 12/20] RISC-V: perf: Modify the counter discovery mechanism

Atish Patra atishp at rivosinc.com
Fri Feb 16 16:57:30 PST 2024


If both counter delegation and SBI PMU is present, the counter
delegation will be used for hardware pmu counters while the SBI PMU
will be used for firmware counters. Thus, the driver has to probe
the counters info via SBI PMU to distinguish the firmware counters.

The hybrid scheme also requires improvements of the informational
logging messages to indicate the user about underlying interface
used for each use case.

Signed-off-by: Atish Patra <atishp at rivosinc.com>
---
 drivers/perf/riscv_pmu_dev.c | 120 ++++++++++++++++++++++++++---------
 1 file changed, 90 insertions(+), 30 deletions(-)

diff --git a/drivers/perf/riscv_pmu_dev.c b/drivers/perf/riscv_pmu_dev.c
index 3d27bd65f140..dfc0ddee9da4 100644
--- a/drivers/perf/riscv_pmu_dev.c
+++ b/drivers/perf/riscv_pmu_dev.c
@@ -35,6 +35,11 @@
 PMU_FORMAT_ATTR(event, "config:0-47");
 PMU_FORMAT_ATTR(firmware, "config:63");
 
+static DEFINE_STATIC_KEY_FALSE(riscv_pmu_sbi_available);
+static DEFINE_STATIC_KEY_FALSE(riscv_pmu_cdeleg_available);
+static bool cdeleg_available;
+static bool sbi_available;
+
 static struct attribute *riscv_arch_formats_attr[] = {
 	&format_attr_event.attr,
 	&format_attr_firmware.attr,
@@ -56,7 +61,8 @@ static int sysctl_perf_user_access __read_mostly = SYSCTL_USER_ACCESS;
 
 /*
  * This structure is SBI specific but counter delegation also require counter
- * width, csr mapping. Reuse it for now.
+ * width, csr mapping. Reuse it for now we can have firmware counters for
+ * platfroms with counter delegation support.
  * RISC-V doesn't have heterogeneous harts yet. This need to be part of
  * per_cpu in case of harts with different pmu counters
  */
@@ -67,6 +73,8 @@ static unsigned int riscv_pmu_irq;
 
 /* Cache the available counters in a bitmask */
 static unsigned long cmask;
+/* Cache the available firmware counters in another bitmask */
+static unsigned long firmware_cmask;
 
 struct sbi_pmu_event_data {
 	union {
@@ -575,35 +583,49 @@ static int rvpmu_sbi_find_num_ctrs(void)
 		return sbi_err_map_linux_errno(ret.error);
 }
 
-static int rvpmu_sbi_get_ctrinfo(int nctr, unsigned long *mask)
+static int rvpmu_deleg_find_ctrs(void)
+{
+	/* TODO */
+	return -1;
+}
+
+static int rvpmu_sbi_get_ctrinfo(int nsbi_ctr, int ndeleg_ctr)
 {
 	struct sbiret ret;
-	int i, num_hw_ctr = 0, num_fw_ctr = 0;
+	int i, num_hw_ctr = 0, num_fw_ctr = 0, num_ctr = 0;
 	union sbi_pmu_ctr_info cinfo;
 
-	pmu_ctr_list = kcalloc(nctr, sizeof(*pmu_ctr_list), GFP_KERNEL);
-	if (!pmu_ctr_list)
-		return -ENOMEM;
-
-	for (i = 0; i < nctr; i++) {
+	for (i = 0; i < nsbi_ctr; i++) {
 		ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_GET_INFO, i, 0, 0, 0, 0, 0);
 		if (ret.error)
 			/* The logical counter ids are not expected to be contiguous */
 			continue;
 
-		*mask |= BIT(i);
-
 		cinfo.value = ret.value;
 		if (cinfo.type == SBI_PMU_CTR_TYPE_FW)
 			num_fw_ctr++;
-		else
+
+		if (!cdeleg_available) {
 			num_hw_ctr++;
-		pmu_ctr_list[i].value = cinfo.value;
+			cmask |= BIT(i);
+			pmu_ctr_list[i].value = cinfo.value;
+		} else if (cinfo.type == SBI_PMU_CTR_TYPE_FW) {
+			/* Track firmware counters in a different mask */
+			firmware_cmask |= BIT(i);
+			pmu_ctr_list[i].value = cinfo.value;
+		}
+
 	}
 
-	pr_info("%d firmware and %d hardware counters\n", num_fw_ctr, num_hw_ctr);
+	if (cdeleg_available) {
+		pr_info("%d firmware and %d hardware counters\n", num_fw_ctr, ndeleg_ctr);
+		num_ctr = num_fw_ctr + ndeleg_ctr;
+	} else {
+		pr_info("%d firmware and %d hardware counters\n", num_fw_ctr, num_hw_ctr);
+		num_ctr = nsbi_ctr;
+	}
 
-	return 0;
+	return num_ctr;
 }
 
 static inline void rvpmu_sbi_stop_all(struct riscv_pmu *pmu)
@@ -775,16 +797,33 @@ static void rvpmu_ctr_stop(struct perf_event *event, unsigned long flag)
 	/* TODO: Counter delegation implementation */
 }
 
-static int rvpmu_find_num_ctrs(void)
+static int rvpmu_find_ctrs(void)
 {
-	return rvpmu_sbi_find_num_ctrs();
-	/* TODO: Counter delegation implementation */
-}
+	int num_sbi_counters = 0, num_deleg_counters = 0, num_counters = 0;
 
-static int rvpmu_get_ctrinfo(int nctr, unsigned long *mask)
-{
-	return rvpmu_sbi_get_ctrinfo(nctr, mask);
-	/* TODO: Counter delegation implementation */
+	/*
+	 * We don't know how many firmware counters available. Just allocate
+	 * for maximum counters driver can support. The default is 64 anyways.
+	 */
+	pmu_ctr_list = kcalloc(RISCV_MAX_COUNTERS, sizeof(*pmu_ctr_list),
+			       GFP_KERNEL);
+	if (!pmu_ctr_list)
+		return -ENOMEM;
+
+	if (cdeleg_available)
+		num_deleg_counters = rvpmu_deleg_find_ctrs();
+
+	/* This is required for firmware counters even if the above is true */
+	if (sbi_available)
+		num_sbi_counters = rvpmu_sbi_find_num_ctrs();
+
+	if (num_sbi_counters >= RISCV_MAX_COUNTERS || num_deleg_counters >= RISCV_MAX_COUNTERS)
+		return -ENOSPC;
+
+	/* cache all the information about counters now */
+	num_counters = rvpmu_sbi_get_ctrinfo(num_sbi_counters, num_deleg_counters);
+
+	return num_counters;
 }
 
 static int rvpmu_event_map(struct perf_event *event, u64 *econfig)
@@ -1069,12 +1108,21 @@ static int rvpmu_device_probe(struct platform_device *pdev)
 	int ret = -ENODEV;
 	int num_counters;
 
-	pr_info("SBI PMU extension is available\n");
+	if (cdeleg_available) {
+		pr_info("hpmcounters will use the counter delegation ISA extension\n");
+		if (sbi_available)
+			pr_info("Firmware counters will be use SBI PMU extension\n");
+		else
+			pr_info("Firmware counters will be not available as SBI PMU extension is not present\n");
+	} else if (sbi_available) {
+		pr_info("Both hpmcounters and firmware counters will use SBI PMU extension\n");
+	}
+
 	pmu = riscv_pmu_alloc();
 	if (!pmu)
 		return -ENOMEM;
 
-	num_counters = rvpmu_find_num_ctrs();
+	num_counters = rvpmu_find_ctrs();
 	if (num_counters < 0) {
 		pr_err("SBI PMU extension doesn't provide any counters\n");
 		goto out_free;
@@ -1086,9 +1134,6 @@ static int rvpmu_device_probe(struct platform_device *pdev)
 		pr_info("SBI returned more than maximum number of counters. Limiting the number of counters to %d\n", num_counters);
 	}
 
-	/* cache all the information about counters now */
-	if (rvpmu_get_ctrinfo(num_counters, &cmask))
-		goto out_free;
 
 	ret = rvpmu_setup_irqs(pmu, pdev);
 	if (ret < 0) {
@@ -1147,11 +1192,26 @@ static int __init rvpmu_devinit(void)
 	int ret;
 	struct platform_device *pdev;
 
-	if (sbi_spec_version < sbi_mk_version(0, 3) ||
-	    !sbi_probe_extension(SBI_EXT_PMU)) {
-		return 0;
+	if (sbi_spec_version >= sbi_mk_version(0, 3) &&
+	    sbi_probe_extension(SBI_EXT_PMU)) {
+		static_branch_enable(&riscv_pmu_sbi_available);
+		sbi_available = true;
+	}
+
+	/*
+	 * We need all three extensions to be present to access the counters
+	 * in S-mode via Supervisor Counter delegation.
+	 */
+	if (riscv_isa_extension_available(NULL, SSCCFG) &&
+	    riscv_isa_extension_available(NULL, SMCDELEG) &&
+	    riscv_isa_extension_available(NULL, SSCSRIND)) {
+		static_branch_enable(&riscv_pmu_cdeleg_available);
+		cdeleg_available = true;
 	}
 
+	if (!(sbi_available || cdeleg_available))
+		return 0;
+
 	ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_RISCV_STARTING,
 				      "perf/riscv/pmu:starting",
 				      rvpmu_starting_cpu, rvpmu_dying_cpu);
-- 
2.34.1




More information about the linux-riscv mailing list