[PATCH 12/17] arm64: dts: renesas: rzg3s-smarc-som: Guard the ethernet IRQ GPIOs with proper flags

Geert Uytterhoeven geert at linux-m68k.org
Fri Feb 16 06:17:08 PST 2024


Hi Claudiu,

On Thu, Feb 8, 2024 at 1:44 PM Claudiu <claudiu.beznea at tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
>
> Ethernet IRQ GPIOs are marked as gpio-hog. Thus, these GPIOs are requested
> at probe w/o considering if there are other peripherals that needs them.
> The Ethernet IRQ GPIOs are shared w/ SDHI2. Selection b/w Ethernet and
> SDHI2 is done through a hardware switch. To avoid scenarios where one wants
> to boot with SDHI2 support and some SDHI pins are not propertly configured
> because of gpio-hog guard Ethernet IRQ GPIO with proper build flag.
>
> Fixes: 932ff0c802c6 ("arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces")
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>

Thanks for your patch! (which was well-hidden between non-fixes ;-)

Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
i.e. will queue in renesas-devel for v6.9.

As Ethernet is enabled by default, I think there is no need to fast-track
this for v6.8.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



More information about the linux-riscv mailing list