[PATCH] riscv: dts: starfive: replace underscores in node names

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Tue Feb 13 06:46:38 PST 2024


Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/riscv/boot/dts/starfive/jh7100.dtsi | 12 ++++++------
 arch/riscv/boot/dts/starfive/jh7110.dtsi |  4 ++--
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
index 14d553047e84..90149e379c10 100644
--- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
@@ -96,14 +96,14 @@ cpu-thermal {
 			thermal-sensors = <&sfctemp>;
 
 			trips {
-				cpu_alert0 {
+				cpu-alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit {
+				cpu-crit {
 					/* milliCelsius */
 					temperature = <90000>;
 					hysteresis = <2000>;
@@ -113,28 +113,28 @@ cpu_crit {
 		};
 	};
 
-	osc_sys: osc_sys {
+	osc_sys: osc-sys {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
 	};
 
-	osc_aud: osc_aud {
+	osc_aud: osc-aud {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
 	};
 
-	gmac_rmii_ref: gmac_rmii_ref {
+	gmac_rmii_ref: gmac-rmii-ref {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		/* Should be overridden by the board when needed */
 		clock-frequency = <0>;
 	};
 
-	gmac_gr_mii_rxclk: gmac_gr_mii_rxclk {
+	gmac_gr_mii_rxclk: gmac-gr-mii-rxclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		/* Should be overridden by the board when needed */
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 1b782f2c1395..8e7f5dec6286 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -237,14 +237,14 @@ map0 {
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit {
+				cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;
-- 
2.34.1




More information about the linux-riscv mailing list