[PATCH v1 2/2] pwm: sophgo: add pwm support for Sophgo CV1800 SoC
Jingbao Qiu
qiujingbao.dlmu at gmail.com
Tue Feb 6 22:09:13 PST 2024
Implement the PWM driver for CV1800.
Signed-off-by: Jingbao Qiu <qiujingbao.dlmu at gmail.com>
---
drivers/pwm/Kconfig | 10 ++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-cv1800.c | 218 +++++++++++++++++++++++++++++++++++++++
3 files changed, 229 insertions(+)
create mode 100644 drivers/pwm/pwm-cv1800.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 4b956d661755..455f07af94f7 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -186,6 +186,16 @@ config PWM_CROS_EC
PWM driver for exposing a PWM attached to the ChromeOS Embedded
Controller.
+config PWM_CV1800
+ tristate "Sophgo CV1800 PWM driver"
+ depends on ARCH_SOPHGO || COMPILE_TEST
+ help
+ Generic PWM framework driver for the Sophgo CV1800 series
+ SoCs.
+
+ To compile this driver as a module, build the dependecies
+ as modules, this will be called pwm-cv1800.
+
config PWM_DWC_CORE
tristate
depends on HAS_IOMEM
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index c5ec9e168ee7..6c3c4a07a316 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_PWM_CLK) += pwm-clk.o
obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o
obj-$(CONFIG_PWM_CRC) += pwm-crc.o
obj-$(CONFIG_PWM_CROS_EC) += pwm-cros-ec.o
+obj-$(CONFIG_PWM_CV1800) += pwm-cv1800.o
obj-$(CONFIG_PWM_DWC_CORE) += pwm-dwc-core.o
obj-$(CONFIG_PWM_DWC) += pwm-dwc.o
obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o
diff --git a/drivers/pwm/pwm-cv1800.c b/drivers/pwm/pwm-cv1800.c
new file mode 100644
index 000000000000..4d4f233c9087
--- /dev/null
+++ b/drivers/pwm/pwm-cv1800.c
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * rtc-cv1800.c: PWM driver for Sophgo cv1800 RTC
+ *
+ * Author: Jingbao Qiu <qiujingbao.dlmu at gmail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+
+#define HLPERIOD_BASE 0x00
+#define PERIOD_BASE 0x04
+#define POLARITY 0x040
+#define PWMSTART 0x044
+#define PWMDONE 0x048
+#define PWMUPDATE 0x4c
+#define PWM_OE 0xd0
+#define HLPERIOD_SHIFT 0x08
+#define PERIOD_SHIFT 0x08
+
+#define HLPERIOD(n) (HLPERIOD_BASE + ((n) * HLPERIOD_SHIFT))
+#define PERIOD(n) (PERIOD_BASE + ((n) * PERIOD_SHIFT))
+#define UPDATE(n) (BIT(0) << (n))
+#define OE_MASK(n) (BIT(0) << (n))
+#define START_MASK(n) (BIT(0) << (n))
+
+#define PERIOD_RESET 0x02
+#define HLPERIOD_RESET 0x1
+#define REG_DISABLE 0x0U
+#define REG_ENABLE BIT(0)
+
+struct soc_info {
+ unsigned int num_pwms;
+};
+
+struct cv1800_pwm {
+ struct pwm_chip chip;
+ struct regmap *map;
+ struct clk *clk;
+};
+
+static inline struct cv1800_pwm *to_cv1800_pwm_dev(struct pwm_chip *chip)
+{
+ return container_of(chip, struct cv1800_pwm, chip);
+}
+
+static int cv1800_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm,
+ u32 enable)
+{
+ struct cv1800_pwm *priv = to_cv1800_pwm_dev(chip);
+ u32 pwm_enable;
+
+ regmap_read(priv->map, PWMSTART, &pwm_enable);
+ pwm_enable >>= pwm->hwpwm;
+
+ if (enable)
+ clk_prepare_enable(priv->clk);
+ else
+ clk_disable_unprepare(priv->clk);
+
+ /*
+ * If the parameters are changed during runtime, Register needs
+ * to be updated to take effect.
+ */
+ if (pwm_enable) {
+ regmap_update_bits(priv->map, PWMUPDATE, UPDATE(pwm->hwpwm),
+ REG_ENABLE << pwm->hwpwm);
+ regmap_update_bits(priv->map, PWMUPDATE, UPDATE(pwm->hwpwm),
+ REG_DISABLE << pwm->hwpwm);
+ } else {
+ regmap_update_bits(priv->map, PWM_OE, OE_MASK(pwm->hwpwm),
+ enable << pwm->hwpwm);
+ regmap_update_bits(priv->map, PWMSTART, START_MASK(pwm->hwpwm),
+ enable << pwm->hwpwm);
+ }
+
+ return 0;
+}
+
+static int cv1800_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct cv1800_pwm *priv = to_cv1800_pwm_dev(chip);
+ u64 period_ns, duty_ns;
+ u32 period_val, hlperiod_val;
+ unsigned long long rate, div;
+
+ period_ns = state->period;
+ duty_ns = state->duty_cycle;
+
+ rate = (unsigned long long)clk_get_rate(priv->clk);
+
+ div = rate * period_ns;
+ do_div(div, NSEC_PER_SEC);
+ period_val = div;
+
+ div = rate * (period_ns - duty_ns);
+ do_div(div, NSEC_PER_SEC);
+ hlperiod_val = div;
+
+ regmap_write(priv->map, PERIOD(pwm->hwpwm), period_val);
+ regmap_write(priv->map, HLPERIOD(pwm->hwpwm), hlperiod_val);
+
+ cv1800_pwm_enable(chip, pwm, state->enabled);
+
+ return 0;
+}
+
+static int cv1800_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct cv1800_pwm *priv = to_cv1800_pwm_dev(chip);
+ u32 period_val, hlperiod_val, tem;
+ u64 rate;
+ u64 period_ns = 0;
+ u64 duty_ns = 0;
+ u32 enable = 0;
+
+ regmap_read(priv->map, PERIOD(pwm->hwpwm), &period_val);
+ regmap_read(priv->map, HLPERIOD(pwm->hwpwm), &hlperiod_val);
+
+ if (period_val != PERIOD_RESET || hlperiod_val != HLPERIOD_RESET) {
+ rate = (u64)clk_get_rate(priv->clk);
+
+ tem = NSEC_PER_SEC * period_val;
+ do_div(tem, rate);
+ period_ns = tem;
+
+ tem = period_val * period_ns;
+ do_div(tem, hlperiod_val);
+ duty_ns = tem;
+
+ regmap_read(priv->map, PWMSTART, &enable);
+ enable >>= pwm->hwpwm;
+ }
+
+ state->period = period_ns;
+ state->duty_cycle = duty_ns;
+ state->enabled = enable;
+
+ return 0;
+}
+
+static const struct pwm_ops cv1800_pwm_ops = {
+ .apply = cv1800_pwm_apply,
+ .get_state = cv1800_pwm_get_state,
+};
+
+static const struct regmap_config cv1800_pwm_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static int cv1800_pwm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct cv1800_pwm *cv_pwm;
+ void __iomem *base;
+ const struct soc_info *info;
+
+ info = device_get_match_data(dev);
+ if (!info)
+ return -EINVAL;
+
+ cv_pwm = devm_kzalloc(dev, sizeof(*cv_pwm), GFP_KERNEL);
+ if (!cv_pwm)
+ return -ENOMEM;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ cv_pwm->map = devm_regmap_init_mmio(&pdev->dev, base,
+ &cv1800_pwm_regmap_config);
+ if (IS_ERR(cv_pwm->map))
+ return PTR_ERR(cv_pwm->map);
+
+ cv_pwm->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(cv_pwm->clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(cv_pwm->clk),
+ "clk not found\n");
+
+ cv_pwm->chip.dev = dev;
+ cv_pwm->chip.ops = &cv1800_pwm_ops;
+ cv_pwm->chip.npwm = info->num_pwms;
+
+ return devm_pwmchip_add(dev, &cv_pwm->chip);
+}
+
+static const struct soc_info cv1800b_soc_info = {
+ .num_pwms = 4,
+};
+
+static const struct of_device_id cv1800_pwm_dt_ids[] = {
+ { .compatible = "sophgo,cv1800-pwm", .data = &cv1800b_soc_info },
+ {},
+};
+MODULE_DEVICE_TABLE(of, cv1800_pwm_dt_ids);
+
+static struct platform_driver cv1800_pwm_driver = {
+ .driver = {
+ .name = "cv1800-pwm",
+ .of_match_table = cv1800_pwm_dt_ids,
+ },
+ .probe = cv1800_pwm_probe,
+};
+module_platform_driver(cv1800_pwm_driver);
+
+MODULE_ALIAS("platform:cv1800-pwm");
+MODULE_AUTHOR("Jingbao Qiu");
+MODULE_DESCRIPTION("Sophgo cv1800 RTC Driver");
+MODULE_LICENSE("GPL");
--
2.25.1
More information about the linux-riscv
mailing list