[PATCH v2 1/3] dt-bindings: gpio: spacemit: add support for K1 SoC

[Yixun Lan]

The GPIO controller of K1 support basic functions as input/output,
all pins can be used as interrupt which route to one IRQ line,
trigger type can be select between rising edge, failing edge, or both.
There are four GPIO banks, each consisting of 32 pins.

Signed-off-by: Yixun Lan <dlan at gentoo.org>
---
 .../devicetree/bindings/gpio/spacemit,k1-gpio.yaml | 75 ++++++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/Documentation/devicetree/bindings/gpio/spacemit,k1-gpio.yaml b/Documentation/devicetree/bindings/gpio/spacemit,k1-gpio.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..3d3d0b3bf2c144ed57b717bee50064949e26f087
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/spacemit,k1-gpio.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/spacemit,k1-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SpacemiT K1 GPIO controller
+
+maintainers:
+  - Yixun Lan <dlan at gentoo.org>
+
+description:
+  The controller's registers are organized as sets of eight 32-bit
+  registers with each set controlling a bank of up to 32 pins.  A single
+  interrupt is shared for all of the banks handled by the controller.
+
+properties:
+  compatible:
+    const: spacemit,k1-gpio
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-ranges: true
+
+  interrupts:
+    maxItems: 1
+    description:
+      The interrupt shared by all GPIO lines for this controller.
+
+  interrupt-names: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the GPIO number, the second should specify interrupt
+      flag. The controller does not support level interrupts, flags of
+      IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW should not be used.
+      Refer <dt-bindings/interrupt-controller/irq.h> for valid flags.
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupts
+  - interrupt-names
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio at d4019000 {
+        compatible = "spacemit,k1-gpio";
+        reg = <0xd4019000 0x800>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupts = <58>;
+        interrupt-names = "gpio_mux";
+        interrupt-parent = <&plic>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&pinctrl 0 0 128>;
+    };

-- 
2.47.0