[RFC PATCH 5/8] mailbox: Add common header for RPMI messages sent via mailbox

Anup Patel apatel at ventanamicro.com
Mon Dec 16 00:48:14 PST 2024


The RPMI based mailbox controller drivers and mailbox cliens need to
share defines related to RPMI messages over mailbox interface so add
a common header for this purpose.

Co-developed-by: Rahul Pathak <rpathak at ventanamicro.com>
Signed-off-by: Rahul Pathak <rpathak at ventanamicro.com>
Signed-off-by: Anup Patel <apatel at ventanamicro.com>
---
 include/linux/mailbox/riscv-rpmi-message.h | 202 +++++++++++++++++++++
 1 file changed, 202 insertions(+)
 create mode 100644 include/linux/mailbox/riscv-rpmi-message.h

diff --git a/include/linux/mailbox/riscv-rpmi-message.h b/include/linux/mailbox/riscv-rpmi-message.h
new file mode 100644
index 000000000000..8f4b3a0edbce
--- /dev/null
+++ b/include/linux/mailbox/riscv-rpmi-message.h
@@ -0,0 +1,202 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2024 Ventana Micro Systems Inc.
+ */
+
+#ifndef _LINUX_RISCV_RPMI_MESSAGE_H_
+#define _LINUX_RISCV_RPMI_MESSAGE_H_
+
+#include <linux/mailbox_client.h>
+
+/** RPMI version encode/decode macros */
+#define RPMI_VER_MAJOR(__ver)		(((__ver) >> 16) & 0xffff)
+#define RPMI_VER_MINOR(__ver)		((__ver) & 0xffff)
+#define RPMI_MKVER(__maj, __min)	(((__maj) << 16) | (__min))
+
+/** RPMI message header */
+struct rpmi_message_header {
+	__le16 servicegroup_id;
+	u8 service_id;
+	u8 flags;
+	__le16 datalen;
+	__le16 token;
+};
+
+/** RPMI message */
+struct rpmi_message {
+	struct rpmi_message_header header;
+	u8 data[];
+};
+
+/** RPMI notification event */
+struct rpmi_notification_event {
+	__le16 event_datalen;
+	u8 event_id;
+	u8 reserved;
+	u8 event_data[];
+};
+
+/** RPMI error codes */
+enum rpmi_error_codes {
+	RPMI_SUCCESS			= 0,
+	RPMI_ERR_FAILED			= -1,
+	RPMI_ERR_NOTSUPP		= -2,
+	RPMI_ERR_INVALID_PARAM		= -3,
+	RPMI_ERR_DENIED			= -4,
+	RPMI_ERR_INVALID_ADDR		= -5,
+	RPMI_ERR_ALREADY		= -6,
+	RPMI_ERR_EXTENSION		= -7,
+	RPMI_ERR_HW_FAULT		= -8,
+	RPMI_ERR_BUSY			= -9,
+	RPMI_ERR_INVALID_STATE		= -10,
+	RPMI_ERR_BAD_RANGE		= -11,
+	RPMI_ERR_TIMEOUT		= -12,
+	RPMI_ERR_IO			= -13,
+	RPMI_ERR_NO_DATA		= -14,
+	RPMI_ERR_RESERVED_START		= -15,
+	RPMI_ERR_RESERVED_END		= -127,
+	RPMI_ERR_VENDOR_START		= -128,
+};
+
+static inline int rpmi_to_linux_error(int rpmi_error)
+{
+	switch (rpmi_error) {
+	case RPMI_SUCCESS:
+		return 0;
+	case RPMI_ERR_INVALID_PARAM:
+	case RPMI_ERR_BAD_RANGE:
+	case RPMI_ERR_INVALID_STATE:
+		return -EINVAL;
+	case RPMI_ERR_DENIED:
+		return -EPERM;
+	case RPMI_ERR_INVALID_ADDR:
+	case RPMI_ERR_HW_FAULT:
+		return -EFAULT;
+	case RPMI_ERR_ALREADY:
+		return -EALREADY;
+	case RPMI_ERR_BUSY:
+		return -EBUSY;
+	case RPMI_ERR_TIMEOUT:
+		return -ETIMEDOUT;
+	case RPMI_ERR_IO:
+		return -ECOMM;
+	case RPMI_ERR_FAILED:
+	case RPMI_ERR_NOTSUPP:
+	case RPMI_ERR_NO_DATA:
+	case RPMI_ERR_EXTENSION:
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+/** RPMI linux mailbox attribute IDs */
+enum rpmi_mbox_attribute_id {
+	RPMI_MBOX_ATTR_SPEC_VERSION = 0,
+	RPMI_MBOX_ATTR_MAX_MSG_DATA_SIZE,
+	RPMI_MBOX_ATTR_SERVICEGROUP_ID,
+	RPMI_MBOX_ATTR_SERVICEGROUP_VERSION,
+	RPMI_MBOX_ATTR_MAX_ID,
+};
+
+/** RPMI linux mailbox message types */
+enum rpmi_mbox_message_type {
+	RPMI_MBOX_MSG_TYPE_GET_ATTRIBUTE = 0,
+	RPMI_MBOX_MSG_TYPE_SET_ATTRIBUTE,
+	RPMI_MBOX_MSG_TYPE_SEND_WITH_RESPONSE,
+	RPMI_MBOX_MSG_TYPE_SEND_WITHOUT_RESPONSE,
+	RPMI_MBOX_MSG_TYPE_NOTIFICATION_EVENT,
+	RPMI_MBOX_MSG_MAX_TYPE,
+};
+
+/** RPMI linux mailbox message instance */
+struct rpmi_mbox_message {
+	enum rpmi_mbox_message_type type;
+	union {
+		struct {
+			enum rpmi_mbox_attribute_id id;
+			u32 value;
+		} attr;
+
+		struct {
+			u32 service_id;
+			void *request;
+			unsigned long request_len;
+			void *response;
+			unsigned long max_response_len;
+			unsigned long out_response_len;
+		} data;
+
+		struct rpmi_notification_event *notif_event;
+	};
+	int error;
+};
+
+/** RPMI linux mailbox message helper routines */
+static inline void rpmi_mbox_init_get_attribute(struct rpmi_mbox_message *msg,
+						enum rpmi_mbox_attribute_id id)
+{
+	msg->type = RPMI_MBOX_MSG_TYPE_GET_ATTRIBUTE;
+	msg->attr.id = id;
+	msg->attr.value = 0;
+	msg->error = 0;
+}
+
+static inline void rpmi_mbox_init_set_attribute(struct rpmi_mbox_message *msg,
+						enum rpmi_mbox_attribute_id id,
+						u32 value)
+{
+	msg->type = RPMI_MBOX_MSG_TYPE_SET_ATTRIBUTE;
+	msg->attr.id = id;
+	msg->attr.value = value;
+	msg->error = 0;
+}
+
+static inline void rpmi_mbox_init_send_with_response(struct rpmi_mbox_message *msg,
+						     u32 service_id,
+						     void *request,
+						     unsigned long request_len,
+						     void *response,
+						     unsigned long max_response_len)
+{
+	msg->type = RPMI_MBOX_MSG_TYPE_SEND_WITH_RESPONSE;
+	msg->data.service_id = service_id;
+	msg->data.request = request;
+	msg->data.request_len = request_len;
+	msg->data.response = response;
+	msg->data.max_response_len = max_response_len;
+	msg->data.out_response_len = 0;
+	msg->error = 0;
+}
+
+static inline void rpmi_mbox_init_send_without_response(struct rpmi_mbox_message *msg,
+							u32 service_id,
+							void *request,
+							unsigned long request_len)
+{
+	msg->type = RPMI_MBOX_MSG_TYPE_SEND_WITHOUT_RESPONSE;
+	msg->data.service_id = service_id;
+	msg->data.request = request;
+	msg->data.request_len = request_len;
+	msg->data.response = NULL;
+	msg->data.max_response_len = 0;
+	msg->data.out_response_len = 0;
+	msg->error = 0;
+}
+
+static inline int rpmi_mbox_send_message(struct mbox_chan *chan,
+					 struct rpmi_mbox_message *msg)
+{
+	int ret;
+
+	/* Send message for the underlying mailbox channel */
+	ret = mbox_send_message(chan, msg);
+	if (ret < 0)
+		return ret;
+
+	/* Explicitly signal txdone for mailbox channel */
+	ret = msg->error;
+	mbox_client_txdone(chan, ret);
+	return ret;
+}
+
+#endif /* _LINUX_RISCV_RPMI_MESSAGE_H_ */
-- 
2.43.0




More information about the linux-riscv mailing list