[PATCH v5 2/3] iio: adc: sophgo-saradc: Add driver for Sophgo CV1800B SARADC

[Jonathan Cameron]

Minor stuff inline.

I'll fix up whilst applying.

Jonathan

> diff --git a/drivers/iio/adc/sophgo-cv1800b-adc.c b/drivers/iio/adc/sophgo-cv1800b-adc.c
> new file mode 100644
> index 000000000000..f4cdec966694
> --- /dev/null
> +++ b/drivers/iio/adc/sophgo-cv1800b-adc.c
> @@ -0,0 +1,218 @@

> +static int cv1800b_adc_read_raw(struct iio_dev *indio_dev,
> +				struct iio_chan_spec const *chan,
> +				int *val, int *val2, long mask)
> +{
> +	struct cv1800b_adc *saradc = iio_priv(indio_dev);
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:{
> +		u32 sample;
> +
> +		scoped_guard(mutex, &saradc->lock) {
> +			int ret;
> +
> +			cv1800b_adc_start_measurement(saradc, chan->scan_index);
> +			ret = cv1800b_adc_wait(saradc);
> +			if (ret < 0)
> +				return ret;
> +
> +			sample = readl(saradc->regs + CV1800B_ADC_CH_RESULT_REG(chan->scan_index));
> +		}
> +		if (!(sample & CV1800B_ADC_CH_VALID))
> +			return -ENODATA;
> +
> +		*val = sample & CV1800B_ADC_CH_RESULT;
> +		return IIO_VAL_INT;
> +		}
> +	case IIO_CHAN_INFO_SCALE:
> +		*val = 3300;
> +		*val2 = 12;
> +		return IIO_VAL_FRACTIONAL_LOG2;
> +	case IIO_CHAN_INFO_SAMP_FREQ:

This needs  {} as per the build bot.
If nothing major comes up, I'll tweak whilst applying.

> +		u32 status_reg = readl(saradc->regs + CV1800B_ADC_CYC_SET_REG);
> +		int clk_div = (1 + FIELD_GET(CV1800B_MASK_CLKDIV, status_reg));
> +		int freq = clk_get_rate(saradc->clk) / clk_div;
> +		int nb_startup_cycle = 1 + FIELD_GET(CV1800B_MASK_STARTUP_CYCLE, status_reg);
> +		int nb_sample_cycle = 1 + FIELD_GET(CV1800B_MASK_SAMPLE_WINDOW, status_reg);
> +		int nb_compare_cycle = 1 + FIELD_GET(CV1800B_MASK_COMPARE_CYCLE, status_reg);
> +
> +		*val = freq / (nb_startup_cycle + nb_sample_cycle + nb_compare_cycle);
> +		return IIO_VAL_INT;
> +	default:
> +		return -EINVAL;
> +	}
> +}

> +static int cv1800b_adc_probe(struct platform_device *pdev)
> +{
> +	struct cv1800b_adc *saradc;
> +	struct iio_dev *indio_dev;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*saradc));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	saradc = iio_priv(indio_dev);
> +	indio_dev->name = "sophgo-cv1800b-adc";
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->info = &cv1800b_adc_info;
> +	indio_dev->num_channels = ARRAY_SIZE(sophgo_channels);
> +	indio_dev->channels = sophgo_channels;
> +
> +	saradc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
> +	if (IS_ERR(saradc->clk))
> +		return PTR_ERR(saradc->clk);
> +
> +	saradc->regs = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(saradc->regs))
> +		return PTR_ERR(saradc->regs);
> +
> +	saradc->irq = platform_get_irq_optional(pdev, 0);
> +	if (saradc->irq >= 0) {
> +		init_completion(&saradc->completion);
> +		ret = devm_request_irq(&pdev->dev, saradc->irq,
> +				       cv1800b_adc_interrupt_handler, 0,
> +				       dev_name(&pdev->dev), saradc);
> +		if (ret)
> +			return ret;
> +
> +		writel(1, saradc->regs + CV1800B_ADC_INTR_EN_REG);
> +	}
> +
> +	ret = devm_mutex_init(&pdev->dev, &saradc->lock);
> +	if (ret)
> +		return ret;

Blank line here slightly helps readability as two unrelated blocks of code.

> +	writel(FIELD_PREP(CV1800B_MASK_STARTUP_CYCLE, 15) |
> +	       FIELD_PREP(CV1800B_MASK_SAMPLE_WINDOW, 15) |
> +	       FIELD_PREP(CV1800B_MASK_CLKDIV, 1) |
> +	       FIELD_PREP(CV1800B_MASK_COMPARE_CYCLE, 15),
> +	       saradc->regs + CV1800B_ADC_CYC_SET_REG);
> +
> +	return devm_iio_device_register(&pdev->dev, indio_dev);
> +}