[PATCH v12 3/3] dmaengine: add driver for Sophgo CV18XX/SG200X dmamux

Inochi Amaoto inochiama at outlook.com
Wed Aug 28 18:23:40 PDT 2024


On Wed, Aug 28, 2024 at 11:26:08PM GMT, Vinod Koul wrote:
> On 27-08-24, 14:49, Inochi Amaoto wrote:
> > Sophgo CV18XX/SG200X use DW AXI CORE with a multiplexer for remapping
> > its request lines. The multiplexer supports at most 8 request lines.
> > 
> > Add driver for Sophgo CV18XX/SG200X DMA multiplexer.
> > 
> > Signed-off-by: Inochi Amaoto <inochiama at outlook.com>
> > ---
> >  drivers/dma/Kconfig         |   9 ++
> >  drivers/dma/Makefile        |   1 +
> >  drivers/dma/cv1800-dmamux.c | 257 ++++++++++++++++++++++++++++++++++++
> >  3 files changed, 267 insertions(+)
> >  create mode 100644 drivers/dma/cv1800-dmamux.c
> > 
> > diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
> > index cc0a62c34861..df010ee1de46 100644
> > --- a/drivers/dma/Kconfig
> > +++ b/drivers/dma/Kconfig
> > @@ -546,6 +546,15 @@ config PLX_DMA
> >  	  These are exposed via extra functions on the switch's
> >  	  upstream port. Each function exposes one DMA channel.
> >  
> > +config SOPHGO_CV1800_DMAMUX
> > +	tristate "Sophgo CV1800/SG2000 series SoC DMA multiplexer support"
> > +	depends on MFD_SYSCON
> > +	depends on ARCH_SOPHGO
> 
> this lgtm, maybe add || COMPILE_TEST for wider compile test coverage?
> 

Good. I will add it.

> > +	help
> > +	  Support for the DMA multiplexer on Sophgo CV1800/SG2000
> > +	  series SoCs.
> > +	  Say Y here if your board have this soc.
> > +
> >  config STE_DMA40
> >  	bool "ST-Ericsson DMA40 support"
> >  	depends on ARCH_U8500
> > diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
> > index 374ea98faf43..60d05b305082 100644
> > --- a/drivers/dma/Makefile
> > +++ b/drivers/dma/Makefile
> > @@ -69,6 +69,7 @@ obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
> >  obj-$(CONFIG_PXA_DMA) += pxa_dma.o
> >  obj-$(CONFIG_RENESAS_DMA) += sh/
> >  obj-$(CONFIG_SF_PDMA) += sf-pdma/
> > +obj-$(CONFIG_SOPHGO_CV1800_DMAMUX) += cv1800-dmamux.o
> >  obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
> >  obj-$(CONFIG_SPRD_DMA) += sprd-dma.o
> >  obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
> > diff --git a/drivers/dma/cv1800-dmamux.c b/drivers/dma/cv1800-dmamux.c
> > new file mode 100644
> > index 000000000000..a907c72325c7
> > --- /dev/null
> > +++ b/drivers/dma/cv1800-dmamux.c
> > @@ -0,0 +1,257 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2024 Inochi Amaoto <inochiama at outlook.com>
> > + */
> > +
> > +#include <linux/bitops.h>
> > +#include <linux/cleanup.h>
> > +#include <linux/module.h>
> > +#include <linux/of_dma.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/llist.h>
> > +#include <linux/regmap.h>
> > +#include <linux/spinlock.h>
> > +#include <linux/mfd/syscon.h>
> > +
> > +#include <soc/sophgo/cv1800-sysctl.h>
> > +
> > +#define DMAMUX_NCELLS			2
> > +#define MAX_DMA_MAPPING_ID		42
> > +#define MAX_DMA_CPU_ID			2
> > +#define MAX_DMA_CH_ID			7
> > +
> > +#define DMAMUX_INTMUX_REGISTER_LEN	4
> > +#define DMAMUX_NR_CH_PER_REGISTER	4
> > +#define DMAMUX_BIT_PER_CH		8
> > +#define DMAMUX_CH_MASk			GENMASK(5, 0)
> > +#define DMAMUX_INT_BIT_PER_CPU		10
> > +#define DMAMUX_CH_UPDATE_BIT		BIT(31)
> > +
> > +#define DMAMUX_CH_REGPOS(chid) \
> > +	((chid) / DMAMUX_NR_CH_PER_REGISTER)
> > +#define DMAMUX_CH_REGOFF(chid) \
> > +	((chid) % DMAMUX_NR_CH_PER_REGISTER)
> > +#define DMAMUX_CH_REG(chid) \
> > +	((DMAMUX_CH_REGPOS(chid) * sizeof(u32)) + \
> > +	 CV1800_SDMA_DMA_CHANNEL_REMAP0)
> > +#define DMAMUX_CH_SET(chid, val) \
> > +	(((val) << (DMAMUX_CH_REGOFF(chid) * DMAMUX_BIT_PER_CH)) | \
> > +	 DMAMUX_CH_UPDATE_BIT)
> > +#define DMAMUX_CH_MASK(chid) \
> > +	DMAMUX_CH_SET(chid, DMAMUX_CH_MASk)
> > +
> > +#define DMAMUX_INT_BIT(chid, cpuid) \
> > +	BIT((cpuid) * DMAMUX_INT_BIT_PER_CPU + (chid))
> > +#define DMAMUX_INTEN_BIT(cpuid) \
> > +	DMAMUX_INT_BIT(8, cpuid)
> > +#define DMAMUX_INT_CH_BIT(chid, cpuid) \
> > +	(DMAMUX_INT_BIT(chid, cpuid) | DMAMUX_INTEN_BIT(cpuid))
> > +#define DMAMUX_INT_MASK(chid) \
> > +	(DMAMUX_INT_BIT(chid, 0) | \
> > +	 DMAMUX_INT_BIT(chid, 1) | \
> > +	 DMAMUX_INT_BIT(chid, 2))
> > +#define DMAMUX_INT_CH_MASK(chid, cpuid) \
> > +	(DMAMUX_INT_MASK(chid) | DMAMUX_INTEN_BIT(cpuid))
> > +
> > +struct cv1800_dmamux_data {
> > +	struct dma_router	dmarouter;
> > +	struct regmap		*regmap;
> > +	spinlock_t		lock;
> > +	struct llist_head	free_maps;
> > +	struct llist_head	reserve_maps;
> > +	DECLARE_BITMAP(mapped_peripherals, MAX_DMA_MAPPING_ID);
> > +};
> > +
> > +struct cv1800_dmamux_map {
> > +	struct llist_node node;
> > +	unsigned int channel;
> > +	unsigned int peripheral;
> > +	unsigned int cpu;
> > +};
> > +
> > +static void cv1800_dmamux_free(struct device *dev, void *route_data)
> > +{
> > +	struct cv1800_dmamux_data *dmamux = dev_get_drvdata(dev);
> > +	struct cv1800_dmamux_map *map = route_data;
> > +
> > +	guard(spinlock_irqsave)(&dmamux->lock);
> > +
> > +	regmap_update_bits(dmamux->regmap,
> > +			   DMAMUX_CH_REG(map->channel),
> > +			   DMAMUX_CH_MASK(map->channel),
> > +			   DMAMUX_CH_UPDATE_BIT);
> > +
> > +	regmap_update_bits(dmamux->regmap, CV1800_SDMA_DMA_INT_MUX,
> > +			   DMAMUX_INT_CH_MASK(map->channel, map->cpu),
> > +			   DMAMUX_INTEN_BIT(map->cpu));
> > +
> > +	dev_dbg(dev, "free channel %u for req %u (cpu %u)\n",
> > +		map->channel, map->peripheral, map->cpu);
> > +}
> > +
> > +static void *cv1800_dmamux_route_allocate(struct of_phandle_args *dma_spec,
> > +					  struct of_dma *ofdma)
> > +{
> > +	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
> > +	struct cv1800_dmamux_data *dmamux = platform_get_drvdata(pdev);
> > +	struct cv1800_dmamux_map *map;
> > +	struct llist_node *node;
> > +	unsigned long flags;
> > +	unsigned int chid, devid, cpuid;
> > +	int ret;
> > +
> > +	if (dma_spec->args_count != DMAMUX_NCELLS) {
> > +		dev_err(&pdev->dev, "invalid number of dma mux args\n");
> > +		return ERR_PTR(-EINVAL);
> > +	}
> > +
> > +	devid = dma_spec->args[0];
> > +	cpuid = dma_spec->args[1];
> > +	dma_spec->args_count = 1;
> > +
> > +	if (devid > MAX_DMA_MAPPING_ID) {
> > +		dev_err(&pdev->dev, "invalid device id: %u\n", devid);
> > +		return ERR_PTR(-EINVAL);
> > +	}
> > +
> > +	if (cpuid > MAX_DMA_CPU_ID) {
> > +		dev_err(&pdev->dev, "invalid cpu id: %u\n", cpuid);
> > +		return ERR_PTR(-EINVAL);
> > +	}
> > +
> > +	dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", 0);
> > +	if (!dma_spec->np) {
> > +		dev_err(&pdev->dev, "can't get dma master\n");
> > +		return ERR_PTR(-EINVAL);
> > +	}
> > +
> > +	spin_lock_irqsave(&dmamux->lock, flags);
> > +
> > +	if (test_bit(devid, dmamux->mapped_peripherals)) {
> > +		llist_for_each_entry(map, dmamux->reserve_maps.first, node) {
> > +			if (map->peripheral == devid && map->cpu == cpuid)
> > +				goto found;
> > +		}
> > +
> > +		ret = -EINVAL;
> > +		goto failed;
> > +	} else {
> > +		node = llist_del_first(&dmamux->free_maps);
> > +		if (!node) {
> > +			ret = -ENODEV;
> > +			goto failed;
> > +		}
> > +
> > +		map = llist_entry(node, struct cv1800_dmamux_map, node);
> > +		llist_add(&map->node, &dmamux->reserve_maps);
> > +		set_bit(devid, dmamux->mapped_peripherals);
> > +	}
> > +
> > +found:
> > +	chid = map->channel;
> > +	map->peripheral = devid;
> > +	map->cpu = cpuid;
> > +
> > +	regmap_set_bits(dmamux->regmap,
> > +			DMAMUX_CH_REG(chid),
> > +			DMAMUX_CH_SET(chid, devid));
> > +
> > +	regmap_update_bits(dmamux->regmap, CV1800_SDMA_DMA_INT_MUX,
> > +			   DMAMUX_INT_CH_MASK(chid, cpuid),
> > +			   DMAMUX_INT_CH_BIT(chid, cpuid));
> > +
> > +	spin_unlock_irqrestore(&dmamux->lock, flags);
> > +
> > +	dma_spec->args[0] = chid;
> > +
> > +	dev_dbg(&pdev->dev, "register channel %u for req %u (cpu %u)\n",
> > +		chid, devid, cpuid);
> > +
> > +	return map;
> > +
> > +failed:
> > +	spin_unlock_irqrestore(&dmamux->lock, flags);
> > +	of_node_put(dma_spec->np);
> > +	dev_err(&pdev->dev, "errno %d\n", ret);
> > +	return ERR_PTR(ret);
> > +}
> > +
> > +static int cv1800_dmamux_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct device_node *mux_node = dev->of_node;
> > +	struct cv1800_dmamux_data *data;
> > +	struct cv1800_dmamux_map *tmp;
> > +	struct device *parent = dev->parent;
> > +	struct regmap *regmap = NULL;
> > +	unsigned int i;
> > +
> > +	if (!parent)
> > +		return -ENODEV;
> > +
> > +	regmap = device_node_to_regmap(parent->of_node);
> > +	if (IS_ERR(regmap))
> > +		return PTR_ERR(regmap);
> > +
> > +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> > +	if (!data)
> > +		return -ENOMEM;
> > +
> > +	spin_lock_init(&data->lock);
> > +	init_llist_head(&data->free_maps);
> > +	init_llist_head(&data->reserve_maps);
> > +
> > +	for (i = 0; i <= MAX_DMA_CH_ID; i++) {
> > +		tmp = devm_kmalloc(dev, sizeof(*tmp), GFP_KERNEL);
> > +		if (!tmp) {
> > +			/* It is OK for not allocating all channel */
> > +			dev_warn(dev, "can not allocate channel %u\n", i);
> > +			continue;
> > +		}
> > +
> > +		init_llist_node(&tmp->node);
> > +		tmp->channel = i;
> > +		llist_add(&tmp->node, &data->free_maps);
> > +	}
> > +
> > +	/* if no channel is allocated, the probe must fail */
> > +	if (llist_empty(&data->free_maps))
> > +		return -ENOMEM;
> > +
> > +	data->regmap = regmap;
> > +	data->dmarouter.dev = dev;
> > +	data->dmarouter.route_free = cv1800_dmamux_free;
> > +
> > +	platform_set_drvdata(pdev, data);
> > +
> > +	return of_dma_router_register(mux_node,
> > +				      cv1800_dmamux_route_allocate,
> > +				      &data->dmarouter);
> > +}
> > +
> > +static void cv1800_dmamux_remove(struct platform_device *pdev)
> > +{
> > +	of_dma_controller_free(pdev->dev.of_node);
> > +}
> > +
> > +static const struct of_device_id cv1800_dmamux_ids[] = {
> > +	{ .compatible = "sophgo,cv1800b-dmamux", },
> > +	{ }
> > +};
> > +MODULE_DEVICE_TABLE(of, cv1800_dmamux_ids);
> > +
> > +static struct platform_driver cv1800_dmamux_driver = {
> > +	.driver = {
> > +		.name = "cv1800-dmamux",
> > +		.of_match_table = cv1800_dmamux_ids,
> > +	},
> > +	.probe = cv1800_dmamux_probe,
> > +	.remove_new = cv1800_dmamux_remove,
> > +};
> > +module_platform_driver(cv1800_dmamux_driver);
> > +
> > +MODULE_AUTHOR("Inochi Amaoto <inochiama at outlook.com>");
> > +MODULE_DESCRIPTION("Sophgo CV1800/SG2000 Series SoC DMAMUX driver");
> > +MODULE_LICENSE("GPL");
> > -- 
> > 2.46.0
> 
> -- 
> ~Vinod



More information about the linux-riscv mailing list