[PATCH] riscv: make ZONE_DMA32 optional

[Drew Fustini]

On Tue, Aug 27, 2024 at 02:36:11PM +0300, Vladimir Kondratiev wrote:
> It is not necessary any RISCV platform has ZONE_DMA32.
> 
> Example - if platform has no DRAM in [0..4G] region,
> it will report failure like below each boot.
> 
> [    0.088709] swapper/0: page allocation failure: order:7, mode:0xcc4(GFP_KERNEL|GFP_DMA32), nodemask=(null),cpuset=/
> [    0.088832] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-rc5 #30
> [    0.088864] Call Trace:
> [    0.088869] [<ffffffff800059f2>] dump_backtrace+0x1c/0x24
> [    0.088910] [<ffffffff805f328c>] show_stack+0x2c/0x38
> [    0.088957] [<ffffffff805fd800>] dump_stack_lvl+0x52/0x74
> [    0.088987] [<ffffffff805fd836>] dump_stack+0x14/0x1c
> [    0.089010] [<ffffffff801a23a8>] warn_alloc+0xf4/0x176
> [    0.089041] [<ffffffff801a3052>] __alloc_pages_noprof+0xc28/0xcb4
> [    0.089067] [<ffffffff80086eda>] atomic_pool_expand+0x62/0x1f8
> [    0.089090] [<ffffffff8080d674>] __dma_atomic_pool_init+0x46/0x9e
> [    0.089115] [<ffffffff8080d762>] dma_atomic_pool_init+0x96/0x11c
> [    0.089139] [<ffffffff80002146>] do_one_initcall+0x5c/0x1b2
> [    0.089158] [<ffffffff8080127c>] kernel_init_freeable+0x214/0x274
> [    0.089190] [<ffffffff805fefd8>] kernel_init+0x1e/0x10a
> [    0.089209] [<ffffffff8060748a>] ret_from_fork+0xe/0x1c
> 
> Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev at mobileye.com>
> ---
>  arch/riscv/Kconfig | 2 +-
>  mm/Kconfig         | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 0f3cd7c3a436..94a573112625 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -50,6 +50,7 @@ config RISCV
>  	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
>  	select ARCH_HAS_UBSAN
>  	select ARCH_HAS_VDSO_DATA
> +	select ARCH_HAS_ZONE_DMA_SET if 64BIT
>  	select ARCH_KEEP_MEMBLOCK if ACPI
>  	select ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE	if 64BIT && MMU
>  	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
> @@ -200,7 +201,6 @@ config RISCV
>  	select THREAD_INFO_IN_TASK
>  	select TRACE_IRQFLAGS_SUPPORT
>  	select UACCESS_MEMCPY if !MMU
> -	select ZONE_DMA32 if 64BIT
>  
>  config CLANG_SUPPORTS_DYNAMIC_FTRACE
>  	def_bool CC_IS_CLANG
> diff --git a/mm/Kconfig b/mm/Kconfig
> index b72e7d040f78..97c85da98e89 100644
> --- a/mm/Kconfig
> +++ b/mm/Kconfig
> @@ -1032,7 +1032,7 @@ config ZONE_DMA
>  config ZONE_DMA32
>  	bool "Support DMA32 zone" if ARCH_HAS_ZONE_DMA_SET
>  	depends on !X86_32
> -	default y if ARM64
> +	default y if ARM64 || (RISCV && 64BIT)
>  
>  config ZONE_DEVICE
>  	bool "Device memory (pmem, HMM, etc...) hotplug support"
> -- 
> 2.37.3
> 

Reviewed-by: Drew Fustini <dfustini at tenstorrent.com>

Thanks for sending this patch as I've also encountered that annoying
error on systems with DRAM above 4GB.

I tested this patch by changing the qemu virt machine to have DRAM
starting at 2^32:

diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index cef41c150aaf..3033a2560edb 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -87,7 +87,7 @@ static const MemMapEntry virt_memmap[] = {
     [VIRT_IMSIC_S] =      { 0x28000000, VIRT_IMSIC_MAX_SIZE },
     [VIRT_PCIE_ECAM] =    { 0x30000000,    0x10000000 },
     [VIRT_PCIE_MMIO] =    { 0x40000000,    0x40000000 },
-    [VIRT_DRAM] =         { 0x80000000,           0x0 },
+    [VIRT_DRAM] =        { 0x100000000,           0x0 },
 };
 
 /* PCIe high mmio is fixed for RV32 */