[PATCH v2] RISC-V: Implement kgdb_roundup_cpus() to enable future NMI Roundup
Jinjie Ruan
ruanjinjie at huawei.com
Mon Aug 19 19:42:03 PDT 2024
Ping.
On 2024/7/27 14:34, Jinjie Ruan wrote:
> Until now, the generic weak kgdb_roundup_cpus() has been used for kgdb on
> RISCV. A custom one allows to debug CPUs that are stuck with interrupts
> disabled with NMI support in the future. And using an IPI is better than
> the generic one since it avoids the potential situation described in the
> generic kgdb_call_nmi_hook(). As Andrew pointed out, once there is NMI
> support, we can easily extend this and the CPU backtrace support
> to use NMIs.
>
> After this patch, the kgdb test show that:
> # echo g > /proc/sysrq-trigger
> [2]kdb> btc
> btc: cpu status: Currently on cpu 2
> Available cpus: 0-1(-), 2, 3(-)
> Stack traceback for pid 0
> 0xffffffff81c13a40 0 0 1 0 - 0xffffffff81c14510 swapper/0
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.10.0-g3120273055b6-dirty #51
> Hardware name: riscv-virtio,qemu (DT)
> Call Trace:
> [<ffffffff80006c48>] dump_backtrace+0x28/0x30
> [<ffffffff80fceb38>] show_stack+0x38/0x44
> [<ffffffff80fe6a04>] dump_stack_lvl+0x58/0x7a
> [<ffffffff80fe6a3e>] dump_stack+0x18/0x20
> [<ffffffff801143fa>] kgdb_cpu_enter+0x682/0x6b2
> [<ffffffff801144ca>] kgdb_nmicallback+0xa0/0xac
> [<ffffffff8000a392>] handle_IPI+0x9c/0x120
> [<ffffffff800a2baa>] handle_percpu_devid_irq+0xa4/0x1e4
> [<ffffffff8009cca8>] generic_handle_domain_irq+0x28/0x36
> [<ffffffff800a9e5c>] ipi_mux_process+0xe8/0x110
> [<ffffffff806e1e30>] imsic_handle_irq+0xf8/0x13a
> [<ffffffff8009cca8>] generic_handle_domain_irq+0x28/0x36
> [<ffffffff806dff12>] riscv_intc_aia_irq+0x2e/0x40
> [<ffffffff80fe6ab0>] handle_riscv_irq+0x54/0x86
> [<ffffffff80ff2e4a>] call_on_irq_stack+0x32/0x40
>
> Rebased on Ryo Takakura's "RISC-V: Enable IPI CPU Backtrace" patch.
>
> Signed-off-by: Jinjie Ruan <ruanjinjie at huawei.com>
> Reviewed-by: Andrew Jones <ajones at ventanamicro.com>
> ---
> v2:
> - Update the commit title and message.
> - Add Reviewed-by.
> ---
> arch/riscv/kernel/smp.c | 27 +++++++++++++++++++++++++--
> 1 file changed, 25 insertions(+), 2 deletions(-)
>
> diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
> index 9b047899791c..c180a647a30e 100644
> --- a/arch/riscv/kernel/smp.c
> +++ b/arch/riscv/kernel/smp.c
> @@ -13,6 +13,7 @@
> #include <linux/interrupt.h>
> #include <linux/module.h>
> #include <linux/kexec.h>
> +#include <linux/kgdb.h>
> #include <linux/percpu.h>
> #include <linux/profile.h>
> #include <linux/smp.h>
> @@ -35,6 +36,7 @@ enum ipi_message_type {
> IPI_IRQ_WORK,
> IPI_TIMER,
> IPI_CPU_BACKTRACE,
> + IPI_KGDB_ROUNDUP,
> IPI_MAX
> };
>
> @@ -115,6 +117,7 @@ void arch_irq_work_raise(void)
>
> static irqreturn_t handle_IPI(int irq, void *data)
> {
> + unsigned int cpu = smp_processor_id();
> int ipi = irq - ipi_virq_base;
>
> switch (ipi) {
> @@ -128,7 +131,7 @@ static irqreturn_t handle_IPI(int irq, void *data)
> ipi_stop();
> break;
> case IPI_CPU_CRASH_STOP:
> - ipi_cpu_crash_stop(smp_processor_id(), get_irq_regs());
> + ipi_cpu_crash_stop(cpu, get_irq_regs());
> break;
> case IPI_IRQ_WORK:
> irq_work_run();
> @@ -141,8 +144,11 @@ static irqreturn_t handle_IPI(int irq, void *data)
> case IPI_CPU_BACKTRACE:
> nmi_cpu_backtrace(get_irq_regs());
> break;
> + case IPI_KGDB_ROUNDUP:
> + kgdb_nmicallback(cpu, get_irq_regs());
> + break;
> default:
> - pr_warn("CPU%d: unhandled IPI%d\n", smp_processor_id(), ipi);
> + pr_warn("CPU%d: unhandled IPI%d\n", cpu, ipi);
> break;
> }
>
> @@ -209,6 +215,7 @@ static const char * const ipi_names[] = {
> [IPI_IRQ_WORK] = "IRQ work interrupts",
> [IPI_TIMER] = "Timer broadcast interrupts",
> [IPI_CPU_BACKTRACE] = "CPU backtrace interrupts",
> + [IPI_KGDB_ROUNDUP] = "KGDB roundup interrupts",
> };
>
> void show_ipi_stats(struct seq_file *p, int prec)
> @@ -339,3 +346,19 @@ void arch_trigger_cpumask_backtrace(const cpumask_t *mask, int exclude_cpu)
> {
> nmi_trigger_cpumask_backtrace(mask, exclude_cpu, riscv_backtrace_ipi);
> }
> +
> +#ifdef CONFIG_KGDB
> +void kgdb_roundup_cpus(void)
> +{
> + int this_cpu = raw_smp_processor_id();
> + int cpu;
> +
> + for_each_online_cpu(cpu) {
> + /* No need to roundup ourselves */
> + if (cpu == this_cpu)
> + continue;
> +
> + send_ipi_single(cpu, IPI_KGDB_ROUNDUP);
> + }
> +}
> +#endif
More information about the linux-riscv
mailing list