[PATCH v10 2/4] drivers: hwmon: sophgo: Add SG2042 external hardware monitor support

[Guenter Roeck]

On 8/13/24 17:40, Inochi Amaoto wrote:
> On Tue, Aug 13, 2024 at 11:27:11AM GMT, Guenter Roeck wrote:
>> On Sat, Aug 10, 2024 at 04:03:51PM +0800, Inochi Amaoto wrote:
>>> SG2042 use an external MCU to provide basic hardware information
>>> and thermal sensors.
>>>
>>> Add driver support for the onboard MCU of SG2042.
>>>
>>> Signed-off-by: Inochi Amaoto <inochiama at outlook.com>
>>> Tested-by: Chen Wang <unicorn_wang at outlook.com>
>>> Reviewed-by: Chen Wang <unicorn_wang at outlook.com>
>>> ---
>>>   Documentation/hwmon/index.rst      |   1 +
>>>   Documentation/hwmon/sg2042-mcu.rst |  77 ++++++
>>>   drivers/hwmon/Kconfig              |  11 +
>>>   drivers/hwmon/Makefile             |   1 +
>>>   drivers/hwmon/sg2042-mcu.c         | 388 +++++++++++++++++++++++++++++
>>>   5 files changed, 478 insertions(+)
>>>   create mode 100644 Documentation/hwmon/sg2042-mcu.rst
>>>   create mode 100644 drivers/hwmon/sg2042-mcu.c
>>>
>>> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
>>> index 913c11390a45..ea3b5be8fe4f 100644
>>> --- a/Documentation/hwmon/index.rst
>>> +++ b/Documentation/hwmon/index.rst
>>> @@ -206,6 +206,7 @@ Hardware Monitoring Kernel Drivers
>>>      sch5636
>>>      scpi-hwmon
>>>      sfctemp
>>> +   sg2042-mcu
>>>      sht15
>>>      sht21
>>>      sht3x
>>> diff --git a/Documentation/hwmon/sg2042-mcu.rst b/Documentation/hwmon/sg2042-mcu.rst
>>> new file mode 100644
>>> index 000000000000..18a3578ac213
>>> --- /dev/null
>>> +++ b/Documentation/hwmon/sg2042-mcu.rst
>>> @@ -0,0 +1,77 @@
>>> +.. SPDX-License-Identifier: GPL-2.0
>>> +
>>> +Kernel driver sg2042-mcu
>>> +========================
>>> +
>>> +Supported chips:
>>> +
>>> +  * Onboard MCU for sg2042
>>> +
>>> +    Addresses scanned: -
>>> +
>>> +    Prefix: 'sg2042-mcu'
>>> +
>>> +Authors:
>>> +
>>> +  - Inochi Amaoto <inochiama at outlook.com>
>>> +
>>> +Description
>>> +-----------
>>> +
>>> +This driver supprts hardware monitoring for onboard MCU with
>>> +i2c interface.
>>> +
>>> +Usage Notes
>>> +-----------
>>> +
>>> +This driver does not auto-detect devices. You will have to instantiate
>>> +the devices explicitly.
>>> +Please see Documentation/i2c/instantiating-devices.rst for details.
>>> +
>>> +Sysfs Attributes
>>> +----------------
>>> +
>>> +The following table shows the standard entries support by the driver:
>>> +
>>> +================= =====================================================
>>> +Name              Description
>>> +================= =====================================================
>>> +temp1_input       Measured temperature of SoC
>>> +temp1_crit        Critical high temperature
>>> +temp1_crit_hyst   hysteresis temperature restore from Critical
>>> +temp2_input       Measured temperature of the base board
>>> +================= =====================================================
>>> +
>>> +The following table shows the extra entries support by the platform:
>>> +
>>
>> Those are attached to the i2c device, which should be mentioned.
> 
> I have mentioned this in the Description. Does this need to be
> mentioned here again?
> 

Here is where it is needed.

Guenter