[PATCH v7 16/17] irqchip/riscv-aplic: Add ACPI support
Anup Patel
anup at brainfault.org
Tue Aug 6 08:54:53 PDT 2024
On Mon, Jul 29, 2024 at 7:54 PM Sunil V L <sunilvl at ventanamicro.com> wrote:
>
> Add ACPI support in APLIC drivers. Use the mapping created early during
> boot to get the details about the APLIC.
>
> Signed-off-by: Sunil V L <sunilvl at ventanamicro.com>
> ---
> drivers/irqchip/irq-riscv-aplic-direct.c | 22 +++++---
> drivers/irqchip/irq-riscv-aplic-main.c | 69 ++++++++++++++++--------
> drivers/irqchip/irq-riscv-aplic-main.h | 1 +
> drivers/irqchip/irq-riscv-aplic-msi.c | 9 +++-
> 4 files changed, 69 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/irqchip/irq-riscv-aplic-direct.c b/drivers/irqchip/irq-riscv-aplic-direct.c
> index 4a3ffe856d6c..34540a0ca4da 100644
> --- a/drivers/irqchip/irq-riscv-aplic-direct.c
> +++ b/drivers/irqchip/irq-riscv-aplic-direct.c
> @@ -4,6 +4,7 @@
> * Copyright (C) 2022 Ventana Micro Systems Inc.
> */
>
> +#include <linux/acpi.h>
> #include <linux/bitfield.h>
> #include <linux/bitops.h>
> #include <linux/cpu.h>
> @@ -189,17 +190,22 @@ static int aplic_direct_starting_cpu(unsigned int cpu)
> }
>
> static int aplic_direct_parse_parent_hwirq(struct device *dev, u32 index,
> - u32 *parent_hwirq, unsigned long *parent_hartid)
> + u32 *parent_hwirq, unsigned long *parent_hartid,
> + struct aplic_priv *priv)
> {
> struct of_phandle_args parent;
> + unsigned long hartid;
> int rc;
>
> - /*
> - * Currently, only OF fwnode is supported so extend this
> - * function for ACPI support.
> - */
> - if (!is_of_node(dev->fwnode))
> - return -EINVAL;
> + if (!is_of_node(dev->fwnode)) {
> + hartid = acpi_get_ext_intc_parent_hartid(priv->id, index);
> + if (hartid == INVALID_HARTID)
> + return -ENODEV;
> +
> + *parent_hartid = hartid;
> + *parent_hwirq = RV_IRQ_EXT;
> + return 0;
> + }
>
> rc = of_irq_parse_one(to_of_node(dev->fwnode), index, &parent);
> if (rc)
> @@ -237,7 +243,7 @@ int aplic_direct_setup(struct device *dev, void __iomem *regs)
> /* Setup per-CPU IDC and target CPU mask */
> current_cpu = get_cpu();
> for (i = 0; i < priv->nr_idcs; i++) {
> - rc = aplic_direct_parse_parent_hwirq(dev, i, &hwirq, &hartid);
> + rc = aplic_direct_parse_parent_hwirq(dev, i, &hwirq, &hartid, priv);
> if (rc) {
> dev_warn(dev, "parent irq for IDC%d not found\n", i);
> continue;
> diff --git a/drivers/irqchip/irq-riscv-aplic-main.c b/drivers/irqchip/irq-riscv-aplic-main.c
> index 28dd175b5764..8357c5f9921a 100644
> --- a/drivers/irqchip/irq-riscv-aplic-main.c
> +++ b/drivers/irqchip/irq-riscv-aplic-main.c
> @@ -4,8 +4,10 @@
> * Copyright (C) 2022 Ventana Micro Systems Inc.
> */
>
> +#include <linux/acpi.h>
> #include <linux/bitfield.h>
> #include <linux/irqchip/riscv-aplic.h>
> +#include <linux/irqchip/riscv-imsic.h>
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_irq.h>
> @@ -125,39 +127,50 @@ static void aplic_init_hw_irqs(struct aplic_priv *priv)
> writel(0, priv->regs + APLIC_DOMAINCFG);
> }
>
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id aplic_acpi_match[] = {
> + { "RSCV0002", 0 },
> + {}
> +};
> +MODULE_DEVICE_TABLE(acpi, aplic_acpi_match);
> +
> +#endif
> +
> int aplic_setup_priv(struct aplic_priv *priv, struct device *dev, void __iomem *regs)
> {
> struct device_node *np = to_of_node(dev->fwnode);
> struct of_phandle_args parent;
> int rc;
>
> - /*
> - * Currently, only OF fwnode is supported so extend this
> - * function for ACPI support.
> - */
> - if (!np)
> - return -EINVAL;
> -
> /* Save device pointer and register base */
> priv->dev = dev;
> priv->regs = regs;
>
> - /* Find out number of interrupt sources */
> - rc = of_property_read_u32(np, "riscv,num-sources", &priv->nr_irqs);
> - if (rc) {
> - dev_err(dev, "failed to get number of interrupt sources\n");
> - return rc;
> - }
> + if (np) {
> + /* Find out number of interrupt sources */
> + rc = of_property_read_u32(np, "riscv,num-sources", &priv->nr_irqs);
> + if (rc) {
> + dev_err(dev, "failed to get number of interrupt sources\n");
> + return rc;
> + }
>
> - /*
> - * Find out number of IDCs based on parent interrupts
> - *
> - * If "msi-parent" property is present then we ignore the
> - * APLIC IDCs which forces the APLIC driver to use MSI mode.
> - */
> - if (!of_property_present(np, "msi-parent")) {
> - while (!of_irq_parse_one(np, priv->nr_idcs, &parent))
> - priv->nr_idcs++;
> + /*
> + * Find out number of IDCs based on parent interrupts
> + *
> + * If "msi-parent" property is present then we ignore the
> + * APLIC IDCs which forces the APLIC driver to use MSI mode.
> + */
> + if (!of_property_present(np, "msi-parent")) {
> + while (!of_irq_parse_one(np, priv->nr_idcs, &parent))
> + priv->nr_idcs++;
> + }
> + } else {
> + rc = riscv_acpi_get_gsi_info(dev->fwnode, &priv->gsi_base, &priv->id,
> + &priv->nr_irqs, &priv->nr_idcs);
> + if (rc) {
> + dev_err(dev, "failed to find GSI mapping\n");
> + return rc;
> + }
> }
>
> /* Setup initial state APLIC interrupts */
> @@ -184,7 +197,11 @@ static int aplic_probe(struct platform_device *pdev)
> * If msi-parent property is present then setup APLIC MSI
> * mode otherwise setup APLIC direct mode.
> */
> - msi_mode = of_property_present(to_of_node(dev->fwnode), "msi-parent");
> + if (is_of_node(dev->fwnode))
> + msi_mode = of_property_present(to_of_node(dev->fwnode), "msi-parent");
> + else
> + msi_mode = imsic_acpi_get_fwnode(NULL) ? 1 : 0;
> +
> if (msi_mode)
> rc = aplic_msi_setup(dev, regs);
> else
> @@ -192,6 +209,11 @@ static int aplic_probe(struct platform_device *pdev)
> if (rc)
> dev_err(dev, "failed to setup APLIC in %s mode\n", msi_mode ? "MSI" : "direct");
>
> +#ifdef CONFIG_ACPI
> + if (!acpi_disabled)
> + acpi_dev_clear_dependencies(ACPI_COMPANION(dev));
> +#endif
> +
> return rc;
> }
>
> @@ -204,6 +226,7 @@ static struct platform_driver aplic_driver = {
> .driver = {
> .name = "riscv-aplic",
> .of_match_table = aplic_match,
> + .acpi_match_table = ACPI_PTR(aplic_acpi_match),
> },
> .probe = aplic_probe,
> };
> diff --git a/drivers/irqchip/irq-riscv-aplic-main.h b/drivers/irqchip/irq-riscv-aplic-main.h
> index 4393927d8c80..9fbf45c7b4f7 100644
> --- a/drivers/irqchip/irq-riscv-aplic-main.h
> +++ b/drivers/irqchip/irq-riscv-aplic-main.h
> @@ -28,6 +28,7 @@ struct aplic_priv {
> u32 gsi_base;
> u32 nr_irqs;
> u32 nr_idcs;
> + u32 id;
This "id" is only used for ACPI so better call it "acpi_id".
> void __iomem *regs;
> struct aplic_msicfg msicfg;
> };
> diff --git a/drivers/irqchip/irq-riscv-aplic-msi.c b/drivers/irqchip/irq-riscv-aplic-msi.c
> index 028444af48bd..f5020241e0ed 100644
> --- a/drivers/irqchip/irq-riscv-aplic-msi.c
> +++ b/drivers/irqchip/irq-riscv-aplic-msi.c
> @@ -157,6 +157,7 @@ static const struct msi_domain_template aplic_msi_template = {
> int aplic_msi_setup(struct device *dev, void __iomem *regs)
> {
> const struct imsic_global_config *imsic_global;
> + struct irq_domain *msi_domain;
> struct aplic_priv *priv;
> struct aplic_msicfg *mc;
> phys_addr_t pa;
> @@ -239,8 +240,14 @@ int aplic_msi_setup(struct device *dev, void __iomem *regs)
> * IMSIC and the IMSIC MSI domains are created later through
> * the platform driver probing so we set it explicitly here.
> */
> - if (is_of_node(dev->fwnode))
> + if (is_of_node(dev->fwnode)) {
> of_msi_configure(dev, to_of_node(dev->fwnode));
> + } else {
> + msi_domain = irq_find_matching_fwnode(imsic_acpi_get_fwnode(dev),
> + DOMAIN_BUS_PLATFORM_MSI);
> + if (msi_domain)
> + dev_set_msi_domain(dev, msi_domain);
> + }
> }
>
> if (!msi_create_device_irq_domain(dev, MSI_DEFAULT_DOMAIN, &aplic_msi_template,
> --
> 2.43.0
>
Otherwise, this looks good to me.
Reviewed-by: Anup Patel <anup at brainfault.org>
Regards,
Anup
More information about the linux-riscv
mailing list