[PATCH v9 4/4] riscv: defconfig: Enable MCU support for SG2042

[Chen Wang]

Why this patch change the dts?

On 2024/8/2 20:38, Inochi Amaoto wrote:
> Enable MCU driver for SG2042 to provide thermal and reboot support.
>
> Signed-off-by: Inochi Amaoto <inochiama at outlook.com>
> Tested-by: Chen Wang <unicorn_wang at outlook.com>
> Reviewed-by: Chen Wang <unicorn_wang at outlook.com>
> ---
>   arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts | 2 +-
>   arch/riscv/configs/defconfig                        | 1 +
>   2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
> index 8b8fdf6243d4..76375e25a495 100644
> --- a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
> +++ b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
> @@ -67,7 +67,7 @@ soc_active3: soc-active3 {
>   				};
>   
>   				soc_hot: soc-hot {
> -					temperature = <85000>;
> +					temperature = <80000>;
>   					hysteresis = <5000>;
>   					type = "hot";
>   				};
> diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
> index 0d678325444f..a0f346301df6 100644
> --- a/arch/riscv/configs/defconfig
> +++ b/arch/riscv/configs/defconfig
> @@ -170,6 +170,7 @@ CONFIG_SPI_SUN6I=y
>   CONFIG_GPIO_SIFIVE=y
>   CONFIG_POWER_RESET_GPIO_RESTART=y
>   CONFIG_SENSORS_SFCTEMP=m
> +CONFIG_SENSORS_SG2042_MCU=y
>   CONFIG_CPU_THERMAL=y
>   CONFIG_DEVFREQ_THERMAL=y
>   CONFIG_RZG2L_THERMAL=y