[PATCH v9 2/4] drivers: hwmon: sophgo: Add SG2042 external hardware monitor support
Guenter Roeck
linux at roeck-us.net
Fri Aug 2 06:59:22 PDT 2024
On 8/2/24 05:38, Inochi Amaoto wrote:
> SG2042 use an external MCU to provide basic hardware information
> and thermal sensors.
>
> Add driver support for the onboard MCU of SG2042.
>
> Signed-off-by: Inochi Amaoto <inochiama at outlook.com>
> Tested-by: Chen Wang <unicorn_wang at outlook.com>
> Reviewed-by: Chen Wang <unicorn_wang at outlook.com>
> ---
> Documentation/hwmon/index.rst | 1 +
> Documentation/hwmon/sg2042-mcu.rst | 39 +++
> drivers/hwmon/Kconfig | 11 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/sg2042-mcu.c | 394 +++++++++++++++++++++++++++++
> 5 files changed, 446 insertions(+)
> create mode 100644 Documentation/hwmon/sg2042-mcu.rst
> create mode 100644 drivers/hwmon/sg2042-mcu.c
>
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 913c11390a45..ea3b5be8fe4f 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -206,6 +206,7 @@ Hardware Monitoring Kernel Drivers
> sch5636
> scpi-hwmon
> sfctemp
> + sg2042-mcu
> sht15
> sht21
> sht3x
> diff --git a/Documentation/hwmon/sg2042-mcu.rst b/Documentation/hwmon/sg2042-mcu.rst
> new file mode 100644
> index 000000000000..250016b47dd1
> --- /dev/null
> +++ b/Documentation/hwmon/sg2042-mcu.rst
> @@ -0,0 +1,39 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Kernel driver sg2042-mcu
> +=====================
> +
> +Supported chips:
> +
> + * Onboard MCU for sg2042
> +
> + Addresses scanned: -
> +
> + Prefix: 'sg2042-mcu'
> +
> +Authors:
> +
> + - Inochi Amaoto <inochiama at outlook.com>
> +
> +Description
> +-----------
> +
> +This driver supprts hardware monitoring for onboard MCU with
> +i2c interface.
> +
> +Usage Notes
> +-----------
> +
> +This driver does not auto-detect devices. You will have to instantiate
> +the devices explicitly.
> +Please see Documentation/i2c/instantiating-devices.rst for details.
> +
> +Sysfs Attributes
> +----------------
> +
> +================= =============================================
> +temp1_input Measured temperature of SoC
> +temp1_crit Critical high temperature
> +temp1_crit_hyst hysteresis temperature restore from Critical
> +temp2_input Measured temperature of the base board
> +================= =============================================
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index b60fe2e58ad6..7aa6c3f322e5 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -2066,6 +2066,17 @@ config SENSORS_SFCTEMP
> This driver can also be built as a module. If so, the module
> will be called sfctemp.
>
> +config SENSORS_SG2042_MCU
> + tristate "Sophgo onboard MCU support"
> + depends on I2C
> + depends on ARCH_SOPHGO || COMPILE_TEST
> + help
> + Support for onboard MCU of Sophgo SG2042 SoCs. This mcu provides
> + power control and some basic information.
> +
> + This driver can be built as a module. If so, the module
> + will be called sg2042-mcu.
> +
> config SENSORS_SURFACE_FAN
> tristate "Surface Fan Driver"
> depends on SURFACE_AGGREGATOR
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index b1c7056c37db..0bbe812a67ae 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -194,6 +194,7 @@ obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
> obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o
> obj-$(CONFIG_SENSORS_SCH5636) += sch5636.o
> obj-$(CONFIG_SENSORS_SFCTEMP) += sfctemp.o
> +obj-$(CONFIG_SENSORS_SG2042_MCU) += sg2042-mcu.o
> obj-$(CONFIG_SENSORS_SL28CPLD) += sl28cpld-hwmon.o
> obj-$(CONFIG_SENSORS_SHT15) += sht15.o
> obj-$(CONFIG_SENSORS_SHT21) += sht21.o
> diff --git a/drivers/hwmon/sg2042-mcu.c b/drivers/hwmon/sg2042-mcu.c
> new file mode 100644
> index 000000000000..6d8d677f86f3
> --- /dev/null
> +++ b/drivers/hwmon/sg2042-mcu.c
> @@ -0,0 +1,394 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2024 Inochi Amaoto <inochiama at outlook.com>
> + *
> + * Sophgo power control mcu for SG2042
> + */
> +
> +#include <linux/cleanup.h>
> +#include <linux/debugfs.h>
> +#include <linux/err.h>
> +#include <linux/hwmon.h>
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +
> +/* fixed MCU registers */
> +#define REG_BOARD_TYPE 0x00
> +#define REG_MCU_FIRMWARE_VERSION 0x01
> +#define REG_PCB_VERSION 0x02
> +#define REG_PWR_CTRL 0x03
> +#define REG_SOC_TEMP 0x04
> +#define REG_BOARD_TEMP 0x05
> +#define REG_RST_COUNT 0x0a
> +#define REG_UPTIME 0x0b
> +#define REG_RESET_REASON 0x0d
> +#define REG_MCU_TYPE 0x18
> +#define REG_REPOWER_ACTION 0x65
> +#define REG_CRITICAL_TEMP 0x66
> +#define REG_REPOWER_TEMP 0x67
> +
> +#define REPOWER_ACTION_REBOOT 1
> +#define REPOWER_ACTION_POWEROFF 2
> +
> +#define MCU_POWER_MAX 0xff
> +
> +#define DEFINE_MCU_DEBUG_ATTR(_name, _reg, _format) \
> + static int _name##_show(struct seq_file *seqf, \
> + void *unused) \
> + { \
> + struct sg2042_mcu_data *mcu = seqf->private; \
> + int ret; \
> + ret = i2c_smbus_read_byte_data(mcu->client, (_reg)); \
> + if (ret < 0) \
> + return ret; \
> + seq_printf(seqf, _format "\n", ret); \
> + return 0; \
> + } \
> + DEFINE_SHOW_ATTRIBUTE(_name) \
> +
> +struct sg2042_mcu_data {
> + struct i2c_client *client;
> + struct dentry *debugfs;
> + struct mutex mutex;
> +};
> +
> +static struct dentry *sgmcu_debugfs;
> +
> +static ssize_t reset_count_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = i2c_smbus_read_byte_data(mcu->client, REG_RST_COUNT);
> + if (ret < 0)
> + return ret;
> +
> + return sprintf(buf, "%d\n", ret);
> +}
> +
> +static ssize_t uptime_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> + u8 time_val[2];
> + int ret;
> +
> + ret = i2c_smbus_read_i2c_block_data(mcu->client, REG_UPTIME,
> + sizeof(time_val), time_val);
> + if (ret < 0)
> + return ret;
> +
> + return sprintf(buf, "%d\n",
> + (int)(time_val[0]) + (int)(time_val[1] << 8));
Pointless type casts
> +}
> +
> +static ssize_t reset_reason_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = i2c_smbus_read_byte_data(mcu->client, REG_RESET_REASON);
> + if (ret < 0)
> + return ret;
> +
> + return sprintf(buf, "0x%02x\n", ret);
> +}
> +
> +static ssize_t repower_action_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> + int ret;
> + const char *action;
> +
> + ret = i2c_smbus_read_byte_data(mcu->client, REG_REPOWER_ACTION);
> + if (ret < 0)
> + return ret;
> +
> + if (ret == REPOWER_ACTION_REBOOT)
> + action = "reboot";
> + else if (ret == REPOWER_ACTION_POWEROFF)
> + action = "poweroff";
> + else
> + action = "unknown";
> +
> + return sprintf(buf, "%s\n", action);
> +}
> +
> +static ssize_t repower_action_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> + u8 value;
> + int ret;
> +
> + if (sysfs_streq("reboot", buf))
> + value = REPOWER_ACTION_REBOOT;
> + else if (sysfs_streq("poweroff", buf))
> + value = REPOWER_ACTION_POWEROFF;
> + else
> + return -EINVAL;
> +
> + guard(mutex)(&mcu->mutex);
> +
Pointless mutex protection.
> + ret = i2c_smbus_write_byte_data(mcu->client,
> + REG_REPOWER_ACTION, value);
> + if (ret < 0)
> + return ret;
> +
> + return count;
> +}
> +
> +static DEVICE_ATTR_RO(reset_count);
> +static DEVICE_ATTR_RO(uptime);
> +static DEVICE_ATTR_RO(reset_reason);
> +static DEVICE_ATTR_RW(repower_action);
> +
> +DEFINE_MCU_DEBUG_ATTR(firmware_version, REG_MCU_FIRMWARE_VERSION, "0x%02x");
> +DEFINE_MCU_DEBUG_ATTR(pcb_version, REG_PCB_VERSION, "0x%02x");
> +DEFINE_MCU_DEBUG_ATTR(board_type, REG_BOARD_TYPE, "0x%02x");
> +DEFINE_MCU_DEBUG_ATTR(mcu_type, REG_MCU_TYPE, "%d");
> +
> +static struct attribute *sg2042_mcu_attrs[] = {
> + &dev_attr_reset_count.attr,
> + &dev_attr_uptime.attr,
> + &dev_attr_reset_reason.attr,
> + &dev_attr_repower_action.attr,
> + NULL
> +};
> +
> +static const struct attribute_group sg2042_mcu_attr_group = {
> + .attrs = sg2042_mcu_attrs,
> +};
> +
> +static const struct attribute_group *sg2042_mcu_groups[] = {
> + &sg2042_mcu_attr_group,
> + NULL
> +};
> +
> +static const struct hwmon_channel_info * const sg2042_mcu_info[] = {
> + HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
> + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_CRIT |
> + HWMON_T_CRIT_HYST,
> + HWMON_T_INPUT),
> + NULL
> +};
> +
> +static int sg2042_mcu_read(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> + int tmp;
> + u8 reg;
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + reg = channel ? REG_BOARD_TEMP : REG_SOC_TEMP;
> + break;
> + case hwmon_temp_crit:
> + reg = REG_CRITICAL_TEMP;
> + break;
> + case hwmon_temp_crit_hyst:
> + reg = REG_REPOWER_TEMP;
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + tmp = i2c_smbus_read_byte_data(mcu->client, reg);
> + if (tmp < 0)
> + return tmp;
> + *val = tmp * 1000;
> +
> + return 0;
> +}
> +
> +static int sg2042_mcu_write(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel, long val)
> +{
> + struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> + int temp = val / 1000;
> + int hyst_temp, crit_temp;
> + u8 reg;
> +
> + if (temp > MCU_POWER_MAX)
> + temp = MCU_POWER_MAX;
> + else if (temp < 0)
> + temp = 0;
> +
temp = clamp_val(temp, 0, MCU_POWER_MAX);
> + guard(mutex)(&mcu->mutex);
> +
> + switch (attr) {
> + case hwmon_temp_crit:
> + hyst_temp = i2c_smbus_read_byte_data(mcu->client,
> + REG_REPOWER_TEMP);
> + if (hyst_temp < 0)
> + return hyst_temp;
> +
> + crit_temp = temp;
> + reg = REG_CRITICAL_TEMP;
> + break;
> + case hwmon_temp_crit_hyst:
> + crit_temp = i2c_smbus_read_byte_data(mcu->client,
> + REG_CRITICAL_TEMP);
> + if (crit_temp < 0)
> + return crit_temp;
> +
> + hyst_temp = temp;
> + reg = REG_REPOWER_TEMP;
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + /*
> + * ensure hyst_temp is smaller to avoid MCU from
> + * keeping triggering repower event.
> + */
> + if (crit_temp < hyst_temp)
> + return -EINVAL;
> +
> + return i2c_smbus_write_byte_data(mcu->client, reg, temp);
> +}
> +
> +static umode_t sg2042_mcu_is_visible(const void *_data,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + switch (type) {
> + case hwmon_temp:
> + switch (attr) {
> + case hwmon_temp_input:
> + return 0444;
> + case hwmon_temp_crit:
> + case hwmon_temp_crit_hyst:
> + if (channel == 0)
> + return 0664;
> + break;
In practice this is the only break; in this nested switch sequence,
making the return 0; at the end necessary.
Please either use break; always when returning 0, or return 0 here
as well and drop the final return 0;
> + default:
> + return 0;
> + }
> + break;
> + default:
> + return 0;
> + }
> + return 0;
> +}
> +
> +static const struct hwmon_ops sg2042_mcu_ops = {
> + .is_visible = sg2042_mcu_is_visible,
> + .read = sg2042_mcu_read,
> + .write = sg2042_mcu_write,
> +};
> +
> +static const struct hwmon_chip_info sg2042_mcu_chip_info = {
> + .ops = &sg2042_mcu_ops,
> + .info = sg2042_mcu_info,
> +};
> +
> +static void sg2042_mcu_debugfs_init(struct sg2042_mcu_data *mcu,
> + struct device *dev)
> +{
> + mcu->debugfs = debugfs_create_dir(dev_name(dev), sgmcu_debugfs);
> + if (mcu->debugfs) {
debugfs_create_dir() returns an ERR_PTR(), which is checked in debugfs_create_file().
This if() is pointless.
> + debugfs_create_file("firmware_version", 0444, mcu->debugfs,
> + mcu, &firmware_version_fops);
> + debugfs_create_file("pcb_version", 0444, mcu->debugfs, mcu,
> + &pcb_version_fops);
> + debugfs_create_file("mcu_type", 0444, mcu->debugfs, mcu,
> + &mcu_type_fops);
> + debugfs_create_file("board_type", 0444, mcu->debugfs, mcu,
> + &board_type_fops);
> + }
> +}
> +
> +static int sg2042_mcu_i2c_probe(struct i2c_client *client)
> +{
> + struct device *dev = &client->dev;
> + struct sg2042_mcu_data *mcu;
> + struct device *hwmon_dev;
> +
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
> + I2C_FUNC_SMBUS_BLOCK_DATA))
> + return -EIO;
> +
return -ENODEV;
> + mcu = devm_kmalloc(dev, sizeof(*mcu), GFP_KERNEL);
> + if (!mcu)
> + return -ENOMEM;
> +
> + mutex_init(&mcu->mutex);
> + mcu->client = client;
> +
> + i2c_set_clientdata(client, mcu);
> +
> + hwmon_dev = devm_hwmon_device_register_with_info(dev, "sg2042_mcu",
> + mcu,
> + &sg2042_mcu_chip_info,
> + NULL);
> + if (IS_ERR_OR_NULL(hwmon_dev))
> + return -EFAULT;
devm_hwmon_device_register_with_info() returns an ERR_PTR(), and
returning -EFAULT instead of it is more than wrong (this does not indicate
a "bad address"). This needs to be
if (IS_ERR(hwmon_dev))
return PTR_ERR(hwmon_dev);
I am sure I asked before not to overwrite error codes.
> +
> + sg2042_mcu_debugfs_init(mcu, dev);
> +
> + return 0;
> +}
> +
> +static void sg2042_mcu_i2c_remove(struct i2c_client *client)
> +{
> + struct sg2042_mcu_data *mcu = i2c_get_clientdata(client);
> +
> + debugfs_remove_recursive(mcu->debugfs);
> +}
> +
> +static const struct i2c_device_id sg2042_mcu_id[] = {
> + { "sg2042-hwmon-mcu", 0 },
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, sg2042_mcu_id);
> +
> +static const struct of_device_id sg2042_mcu_of_id[] = {
> + { .compatible = "sophgo,sg2042-hwmon-mcu" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, sg2042_mcu_of_id);
> +
> +static struct i2c_driver sg2042_mcu_driver = {
> + .driver = {
> + .name = "sg2042-mcu",
> + .of_match_table = sg2042_mcu_of_id,
> + .dev_groups = sg2042_mcu_groups,
> + },
> + .probe = sg2042_mcu_i2c_probe,
> + .remove = sg2042_mcu_i2c_remove,
> + .id_table = sg2042_mcu_id,
> +};
> +
> +static int __init sg2042_mcu_init(void)
> +{
> + sgmcu_debugfs = debugfs_create_dir("sg2042-mcu", NULL);
> + return i2c_add_driver(&sg2042_mcu_driver);
> +}
> +
> +static void __exit sg2042_mcu_exit(void)
> +{
> + debugfs_remove_recursive(sgmcu_debugfs);
> + i2c_del_driver(&sg2042_mcu_driver);
> +}
> +
> +module_init(sg2042_mcu_init);
> +module_exit(sg2042_mcu_exit);
> +
> +MODULE_AUTHOR("Inochi Amaoto <inochiama at outlook.com>");
> +MODULE_DESCRIPTION("MCU I2C driver for SG2042 soc platform");
> +MODULE_LICENSE("GPL");
More information about the linux-riscv
mailing list