[PATCH v3] of: property: Add fw_devlink support for interrupt-map property

[Anup Patel]

Some of the PCI controllers (such as generic PCI host controller)
use "interrupt-map" DT property to describe the mapping between
PCI endpoints and PCI interrupt pins. This the only case where
the interrupts are not described in DT.

Currently, there is no fw_devlink created based on "interrupt-map"
DT property so interrupt controller is not guaranteed to be probed
before PCI host controller. This affects every platform where both
PCI host controller and interrupt controllers are probed as regular
platform devices.

This creates fw_devlink between consumers (PCI host controller) and
supplier (interrupt controller) based on "interrupt-map" DT property.

Signed-off-by: Anup Patel <apatel at ventanamicro.com>
---
Changes since v2:
- No need for a loop to find #interrupt-cells property value
- Fix node de-reference leak when index is greater than number
  of entries in interrupt-map property
Changes since v1:
- Updated commit description based on Rob's suggestion
- Use of_irq_parse_raw() for parsing interrupt-map DT property
---
 drivers/of/property.c | 50 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/drivers/of/property.c b/drivers/of/property.c
index a6358ee99b74..7326ca07adfe 100644
--- a/drivers/of/property.c
+++ b/drivers/of/property.c
@@ -1311,6 +1311,55 @@ static struct device_node *parse_interrupts(struct device_node *np,
 	return of_irq_parse_one(np, index, &sup_args) ? NULL : sup_args.np;
 }
 
+static struct device_node *parse_interrupt_map(struct device_node *np,
+					       const char *prop_name, int index)
+{
+	const __be32 *imap, *imap_end, *addr;
+	struct of_phandle_args sup_args;
+	u32 addrcells, intcells;
+	int i, imaplen;
+
+	if (!IS_ENABLED(CONFIG_OF_IRQ))
+		return NULL;
+
+	if (strcmp(prop_name, "interrupt-map"))
+		return NULL;
+
+	if (of_property_read_u32(np, "#interrupt-cells", &intcells))
+		return NULL;
+	addrcells = of_bus_n_addr_cells(np);
+
+	imap = of_get_property(np, "interrupt-map", &imaplen);
+	if (!imap || imaplen <= (addrcells + intcells))
+		return NULL;
+	imap_end = imap + imaplen;
+
+	sup_args.np = NULL;
+	while (imap < imap_end) {
+		addr = imap;
+		imap += addrcells;
+
+		sup_args.np = np;
+		sup_args.args_count = intcells;
+		for (i = 0; i < intcells; i++)
+			sup_args.args[i] = be32_to_cpu(imap[i]);
+		imap += intcells;
+
+		if (of_irq_parse_raw(addr, &sup_args))
+			return NULL;
+
+		if (!index)
+			return sup_args.np;
+
+		of_node_put(sup_args.np);
+		sup_args.np = NULL;
+		imap += sup_args.args_count + 1;
+		index--;
+	}
+
+	return NULL;
+}
+
 static struct device_node *parse_remote_endpoint(struct device_node *np,
 						 const char *prop_name,
 						 int index)
@@ -1359,6 +1408,7 @@ static const struct supplier_bindings of_supplier_bindings[] = {
 	{ .parse_prop = parse_msi_parent, },
 	{ .parse_prop = parse_gpio_compat, },
 	{ .parse_prop = parse_interrupts, },
+	{ .parse_prop = parse_interrupt_map, },
 	{ .parse_prop = parse_regulators, },
 	{ .parse_prop = parse_gpio, },
 	{ .parse_prop = parse_gpios, },
-- 
2.34.1