[PATCH 3/4] riscv: dts: thead: Add TH1520 I2C nodes

[Emil Renner Berthing]

Thomas Bonnefille wrote:
> Add nodes for the five I2C on the T-Head TH1520 RISCV SoC.
> All the I2C nodes are fed with the same clock named i2c_ic_clk.
> As there is currently no clock support, the i2c_ic_clk is exposed
> through a fixed-clock to mimic the existing nodes.
>

Thanks!

Reviewed-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>
Tested-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>

> Signed-off-by: Thomas Bonnefille <thomas.bonnefille at bootlin.com>
> ---
>  arch/riscv/boot/dts/thead/th1520.dtsi | 66 +++++++++++++++++++++++++++
>  1 file changed, 66 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
> index d2fa25839012..86ae507576dc 100644
> --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> @@ -153,6 +153,12 @@ sdhci_clk: sdhci-clock {
>  		#clock-cells = <0>;
>  	};
>
> +	i2c_ic_clk: i2c-clock {
> +		compatible = "fixed-clock";
> +		clock-frequency = <50000000>;
> +		#clock-cells = <0>;
> +	};
> +
>  	soc {
>  		compatible = "simple-bus";
>  		interrupt-parent = <&plic>;
> @@ -258,6 +264,36 @@ portc: gpio-controller at 0 {
>  			};
>  		};
>
> +		i2c0: i2c at ffe7f20000 {
> +			compatible = "thead,th1520-i2c", "snps,designware-i2c";
> +			reg = <0xff 0xe7f20000 0x0 0x4000>;
> +			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&i2c_ic_clk>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		i2c1: i2c at ffe7f24000 {
> +			compatible = "thead,th1520-i2c", "snps,designware-i2c";
> +			reg = <0xff 0xe7f24000 0x0 0x4000>;
> +			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&i2c_ic_clk>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		i2c4: i2c at ffe7f28000 {
> +			compatible = "thead,th1520-i2c", "snps,designware-i2c";
> +			reg = <0xff 0xe7f28000 0x0 0x4000>;
> +			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&i2c_ic_clk>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
>  		gpio3: gpio at ffe7f38000 {
>  			compatible = "snps,dw-apb-gpio";
>  			reg = <0xff 0xe7f38000 0x0 0x1000>;
> @@ -312,6 +348,16 @@ portb: gpio-controller at 0 {
>  			};
>  		};
>
> +		i2c2: i2c at ffec00c000 {
> +			compatible = "thead,th1520-i2c", "snps,designware-i2c";
> +			reg = <0xff 0xec00c000 0x0 0x4000>;
> +			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&i2c_ic_clk>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
>  		uart2: serial at ffec010000 {
>  			compatible = "snps,dw-apb-uart";
>  			reg = <0xff 0xec010000 0x0 0x4000>;
> @@ -322,6 +368,16 @@ uart2: serial at ffec010000 {
>  			status = "disabled";
>  		};
>
> +		i2c3: i2c at ffec014000 {
> +			compatible = "thead,th1520-i2c", "snps,designware-i2c";
> +			reg = <0xff 0xec014000 0x0 0x4000>;
> +			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&i2c_ic_clk>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
>  		dmac0: dma-controller at ffefc00000 {
>  			compatible = "snps,axi-dma-1.01a";
>  			reg = <0xff 0xefc00000 0x0 0x1000>;
> @@ -394,6 +450,16 @@ uart5: serial at fff7f0c000 {
>  			status = "disabled";
>  		};
>
> +		i2c5: i2c at fff7f2c000 {
> +			compatible = "thead,th1520-i2c", "snps,designware-i2c";
> +			reg = <0xff 0xf7f2c000 0x0 0x4000>;
> +			interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&i2c_ic_clk>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
>  		timer4: timer at ffffc33000 {
>  			compatible = "snps,dw-apb-timer";
>  			reg = <0xff 0xffc33000 0x0 0x14>;
> --
> 2.44.0
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv