[PATCH v2 1/2] dt-bindings: hwmon: Add Sophgo SG2042 external hardware monitor support

[Rob Herring]

On Mon, 29 Apr 2024 08:56:34 +0800, Inochi Amaoto wrote:
> Due to the design, Sophgo SG2042 use an external MCU to provide
> hardware information, thermal information and reset control.
> 
> Add bindings for this monitor device.
> 
> Signed-off-by: Inochi Amaoto <inochiama at outlook.com>
> ---
>  .../hwmon/sophgo,sg2042-hwmon-mcu.yaml        | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename
 	 $id: http://devicetree.org/schemas/soc/sophgo/sophgo,sg2042-hwmon-mcu.yaml
 	file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/IA1PR20MB495302443F9B18EB1A0DDF65BB1B2@IA1PR20MB4953.namprd20.prod.outlook.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.