[PATCH 1/2] dt-bindings: soc: sophgo: Add SG2042 external hardware monitor support

Inochi Amaoto inochiama at outlook.com
Sat Apr 27 18:30:39 PDT 2024


Due to the design, Sophgo SG2042 use an external MCU to provide
hardware information, thermal information and reset control.

Add bindings for this monitor device.

Signed-off-by: Inochi Amaoto <inochiama at outlook.com>
---
 .../soc/sophgo/sophgo,sg2042-hwmon-mcu.yaml   | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/sophgo/sophgo,sg2042-hwmon-mcu.yaml

diff --git a/Documentation/devicetree/bindings/soc/sophgo/sophgo,sg2042-hwmon-mcu.yaml b/Documentation/devicetree/bindings/soc/sophgo/sophgo,sg2042-hwmon-mcu.yaml
new file mode 100644
index 000000000000..6a0383b7e3d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/sophgo/sophgo,sg2042-hwmon-mcu.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/sophgo/sophgo,sg2042-hwmon-mcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 onboard MCU support
+
+maintainers:
+  - Inochi Amaoto <inochiama at outlook.com>
+
+properties:
+  compatible:
+    const: sophgo,sg2042-hwmon-mcu
+
+  reg:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        syscon at 17 {
+            compatible = "sophgo,sg2042-hwmon-mcu";
+            reg = <0x17>;
+            #thermal-sensor-cells = <1>;
+        };
+    };
--
2.44.0




More information about the linux-riscv mailing list