[PATCH v3 0/2] Add StarFive's JH8100 StarLink Cache Controller

[Emil Renner Berthing]

Joshua Yeong wrote:
> StarFive's JH8100 StarLink Cache Controller flush/invalidates cache using non-
> conventional RISC-V Zicbom extension instructions. This driver provides the
> cache handling on StarFive RISC-V SoC.

Hi Joshua,

As far as I know you didn't tape out the JH8100 yet, and you seem to have
replaced the SiFive cache controller with your own implementation. Can you
exlain a bit more about why you didn't implement the perfectly good Zicbom
standard instead of adding yet another non-standard work-around like this?

/Emil

>
> Changes in v3:
> - Fix code syntax
> - Link to v2: https://lore.kernel.org/all/20240423072639.143450-1-joshua.yeong@starfivetech.com/
>
> Changes in v2:
> - Change patch title from 'Add StarFive's StarLink-500 Cache Controller'
> - Remove StarFive alternative from errata framework
> - Fixes warning from https://lore.kernel.org/oe-kbuild-all/202403151625.boKDjHGr-lkp@intel.com/
> - Flush completion through atomic timeout function
> - Link to v1: https://lore.kernel.org/lkml/20240314061205.26143-1-joshua.yeong@starfivetech.com/
>
> Joshua Yeong (2):
>   cache: Add StarFive StarLink cache management for StarFive JH8100
>   dt-bindings: cache: Add docs for StarFive Starlink cache controller
>
>  .../cache/starfive,jh8100-starlink-cache.yaml |  66 +++++++++
>  drivers/cache/Kconfig                         |   9 ++
>  drivers/cache/Makefile                        |   5 +-
>  drivers/cache/starfive_starlink_cache.c       | 135 ++++++++++++++++++
>  4 files changed, 213 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/cache/starfive,jh8100-starlink-cache.yaml
>  create mode 100644 drivers/cache/starfive_starlink_cache.c
>
> --
> 2.25.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv