[PATCH v5 2/2] riscv: dts: sophgo: add initial Milk-V Duo S board support

[Michael Opdenacker]

Hi Inochi,

Thanks for the advice.

On 4/21/24 at 08:30, Inochi Amaoto wrote:
> On Sun, Apr 21, 2024 at 07:57:01AM GMT, Michael Opdenacker wrote:
> +++ b/arch/riscv/boot/dts/sophgo/sg2000-milkv-duos.dts
> @@ -0,0 +1,34 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2024 Michael Opdenacker <michael.opdenacker at bootlin.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "cv1812h.dtsi"
> +
> +/ {
> +	model = "Milk-V Duo S";
> +	compatible = "milkv,duos", "sophgo,cv1812h";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory at 80000000 {
> +		device_type = "memory";
> +		reg = <0x80000000 0x20000000>;
> +	};
>>> Add a cpu specific file, and move this to it.
>> Now that I'm including "cv1812h.dtsi", which has the same structure, all I
>> need is to change the reg setting to have 512 MB of RAM instead of 256MB,
>> right? See the V6 I'm sending soon.
>>
> No, Duo S does not use cv1812h, in any means. I just told you to use
> cv1812h for local test. If you want to upstream Duo S, you must add
> the right cpu compatibles and necessary nodes. These two are different
> things.

So, do you mean I should create a new "sophgo,sg2000" compatible, 
together with  a new "sg2000.dtsi" (or "sg200x.dtsi"?) file? Could this 
file include "cv18xx.dtsi"?

By the way, where's the best source of information about the Sophgo 
sg2000 and sg2002 processors? Even the Sophgo website doesn't seem to 
have them :-/ . It just mentions the CV18xx ones.

Thanks again
Cheers
Michael.

-- 
Michael Opdenacker, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com