[PATCH v14 4/5] clk: sophgo: Add SG2042 clock driver
Chen Wang
unicorn_wang at outlook.com
Mon Apr 22 02:07:17 PDT 2024
hi, Stephen,
Could you please review and comment? I have corrected all the comments
you provided on the last vesion.
If no more questions, appreciated if you can pick this patchset (both
bindings and driver part, except the dts part) for next (6.10).
Thanks,
Chen
On 2024/4/15 15:23, Chen Wang wrote:
> From: Chen Wang <unicorn_wang at outlook.com>
>
> Add a driver for the SOPHGO SG2042 clocks.
>
> Signed-off-by: Chen Wang <unicorn_wang at outlook.com>
> ---
> drivers/clk/Kconfig | 1 +
> drivers/clk/Makefile | 1 +
> drivers/clk/sophgo/Kconfig | 8 +
> drivers/clk/sophgo/Makefile | 2 +
> drivers/clk/sophgo/clk-sophgo-sg2042.c | 1645 ++++++++++++++++++++++++
> 5 files changed, 1657 insertions(+)
> create mode 100644 drivers/clk/sophgo/Kconfig
> create mode 100644 drivers/clk/sophgo/Makefile
> create mode 100644 drivers/clk/sophgo/clk-sophgo-sg2042.c
>
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 50af5fc7f570..bc28502ec3c9 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -489,6 +489,7 @@ source "drivers/clk/rockchip/Kconfig"
> source "drivers/clk/samsung/Kconfig"
> source "drivers/clk/sifive/Kconfig"
> source "drivers/clk/socfpga/Kconfig"
> +source "drivers/clk/sophgo/Kconfig"
> source "drivers/clk/sprd/Kconfig"
> source "drivers/clk/starfive/Kconfig"
> source "drivers/clk/sunxi/Kconfig"
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 14fa8d4ecc1f..4abe16c8ccdf 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -118,6 +118,7 @@ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
> obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/
> obj-$(CONFIG_CLK_SIFIVE) += sifive/
> obj-y += socfpga/
> +obj-y += sophgo/
> obj-$(CONFIG_PLAT_SPEAR) += spear/
> obj-y += sprd/
> obj-$(CONFIG_ARCH_STI) += st/
> diff --git a/drivers/clk/sophgo/Kconfig b/drivers/clk/sophgo/Kconfig
> new file mode 100644
> index 000000000000..82516adb0f97
> --- /dev/null
> +++ b/drivers/clk/sophgo/Kconfig
> @@ -0,0 +1,8 @@
> +# SPDX-License-Identifier: GPL-2.0
> +# common clock support for SOPHGO SoC family.
> +
> +config CLK_SOPHGO_SG2042
> + bool "Sophgo SG2042 clock support"
> + depends on ARCH_SOPHGO || COMPILE_TEST
> + help
> + Say yes here to support the clock controller on the Sophgo SG2042 SoC.
> diff --git a/drivers/clk/sophgo/Makefile b/drivers/clk/sophgo/Makefile
> new file mode 100644
> index 000000000000..13834cce260c
> --- /dev/null
> +++ b/drivers/clk/sophgo/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +obj-$(CONFIG_CLK_SOPHGO_SG2042) += clk-sophgo-sg2042.o
> diff --git a/drivers/clk/sophgo/clk-sophgo-sg2042.c b/drivers/clk/sophgo/clk-sophgo-sg2042.c
> new file mode 100644
> index 000000000000..0bcfaab52f51
> --- /dev/null
> +++ b/drivers/clk/sophgo/clk-sophgo-sg2042.c
> @@ -0,0 +1,1645 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Sophgo SG2042 Clock Generator Driver
> + *
> + * Copyright (C) 2024 Sophgo Technology Inc. All rights reserved.
> + */
> +
> +#include <asm/div64.h>
> +#include <linux/array_size.h>
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/platform_device.h>
> +
> +/*
> + * The clock of SG2042 is composed of three parts.
> + * The registers of these three parts of the clock are scattered in three
> + * different memory address spaces:
> + * - pll clocks
> + * - gate clocks for RP subsystem
> + * - div/mux, and gate clocks working for other subsystem than RP subsystem
> + */
> +#include <dt-bindings/clock/sophgo,sg2042-pll.h>
> +#include <dt-bindings/clock/sophgo,sg2042-rpgate.h>
> +#include <dt-bindings/clock/sophgo,sg2042-clkgen.h>
> +
> +/* Registers defined in SYS_CTRL */
> +#define R_PLL_BEGIN 0xC0
> +#define R_PLL_STAT (0xC0 - R_PLL_BEGIN)
> +#define R_PLL_CLKEN_CONTROL (0xC4 - R_PLL_BEGIN)
> +#define R_MPLL_CONTROL (0xE8 - R_PLL_BEGIN)
> +#define R_FPLL_CONTROL (0xF4 - R_PLL_BEGIN)
> +#define R_DPLL0_CONTROL (0xF8 - R_PLL_BEGIN)
> +#define R_DPLL1_CONTROL (0xFC - R_PLL_BEGIN)
> +
> +#define R_SYSGATE_BEGIN 0x0368
> +#define R_RP_RXU_CLK_ENABLE (0x0368 - R_SYSGATE_BEGIN)
> +#define R_MP0_STATUS_REG (0x0380 - R_SYSGATE_BEGIN)
> +#define R_MP0_CONTROL_REG (0x0384 - R_SYSGATE_BEGIN)
> +#define R_MP1_STATUS_REG (0x0388 - R_SYSGATE_BEGIN)
> +#define R_MP1_CONTROL_REG (0x038C - R_SYSGATE_BEGIN)
> +#define R_MP2_STATUS_REG (0x0390 - R_SYSGATE_BEGIN)
> +#define R_MP2_CONTROL_REG (0x0394 - R_SYSGATE_BEGIN)
> +#define R_MP3_STATUS_REG (0x0398 - R_SYSGATE_BEGIN)
> +#define R_MP3_CONTROL_REG (0x039C - R_SYSGATE_BEGIN)
> +#define R_MP4_STATUS_REG (0x03A0 - R_SYSGATE_BEGIN)
> +#define R_MP4_CONTROL_REG (0x03A4 - R_SYSGATE_BEGIN)
> +#define R_MP5_STATUS_REG (0x03A8 - R_SYSGATE_BEGIN)
> +#define R_MP5_CONTROL_REG (0x03AC - R_SYSGATE_BEGIN)
> +#define R_MP6_STATUS_REG (0x03B0 - R_SYSGATE_BEGIN)
> +#define R_MP6_CONTROL_REG (0x03B4 - R_SYSGATE_BEGIN)
> +#define R_MP7_STATUS_REG (0x03B8 - R_SYSGATE_BEGIN)
> +#define R_MP7_CONTROL_REG (0x03BC - R_SYSGATE_BEGIN)
> +#define R_MP8_STATUS_REG (0x03C0 - R_SYSGATE_BEGIN)
> +#define R_MP8_CONTROL_REG (0x03C4 - R_SYSGATE_BEGIN)
> +#define R_MP9_STATUS_REG (0x03C8 - R_SYSGATE_BEGIN)
> +#define R_MP9_CONTROL_REG (0x03CC - R_SYSGATE_BEGIN)
> +#define R_MP10_STATUS_REG (0x03D0 - R_SYSGATE_BEGIN)
> +#define R_MP10_CONTROL_REG (0x03D4 - R_SYSGATE_BEGIN)
> +#define R_MP11_STATUS_REG (0x03D8 - R_SYSGATE_BEGIN)
> +#define R_MP11_CONTROL_REG (0x03DC - R_SYSGATE_BEGIN)
> +#define R_MP12_STATUS_REG (0x03E0 - R_SYSGATE_BEGIN)
> +#define R_MP12_CONTROL_REG (0x03E4 - R_SYSGATE_BEGIN)
> +#define R_MP13_STATUS_REG (0x03E8 - R_SYSGATE_BEGIN)
> +#define R_MP13_CONTROL_REG (0x03EC - R_SYSGATE_BEGIN)
> +#define R_MP14_STATUS_REG (0x03F0 - R_SYSGATE_BEGIN)
> +#define R_MP14_CONTROL_REG (0x03F4 - R_SYSGATE_BEGIN)
> +#define R_MP15_STATUS_REG (0x03F8 - R_SYSGATE_BEGIN)
> +#define R_MP15_CONTROL_REG (0x03FC - R_SYSGATE_BEGIN)
> +
> +/* Registers defined in CLOCK */
> +#define R_CLKENREG0 0x00
> +#define R_CLKENREG1 0x04
> +#define R_CLKSELREG0 0x20
> +#define R_CLKDIVREG0 0x40
> +#define R_CLKDIVREG1 0x44
> +#define R_CLKDIVREG2 0x48
> +#define R_CLKDIVREG3 0x4C
> +#define R_CLKDIVREG4 0x50
> +#define R_CLKDIVREG5 0x54
> +#define R_CLKDIVREG6 0x58
> +#define R_CLKDIVREG7 0x5C
> +#define R_CLKDIVREG8 0x60
> +#define R_CLKDIVREG9 0x64
> +#define R_CLKDIVREG10 0x68
> +#define R_CLKDIVREG11 0x6C
> +#define R_CLKDIVREG12 0x70
> +#define R_CLKDIVREG13 0x74
> +#define R_CLKDIVREG14 0x78
> +#define R_CLKDIVREG15 0x7C
> +#define R_CLKDIVREG16 0x80
> +#define R_CLKDIVREG17 0x84
> +#define R_CLKDIVREG18 0x88
> +#define R_CLKDIVREG19 0x8C
> +#define R_CLKDIVREG20 0x90
> +#define R_CLKDIVREG21 0x94
> +#define R_CLKDIVREG22 0x98
> +#define R_CLKDIVREG23 0x9C
> +#define R_CLKDIVREG24 0xA0
> +#define R_CLKDIVREG25 0xA4
> +#define R_CLKDIVREG26 0xA8
> +#define R_CLKDIVREG27 0xAC
> +#define R_CLKDIVREG28 0xB0
> +#define R_CLKDIVREG29 0xB4
> +#define R_CLKDIVREG30 0xB8
> +
> +/* All following shift value are the same for all DIV registers */
> +#define SHIFT_DIV_RESET_CTRL 0
> +#define SHIFT_DIV_FACTOR_SEL 3
> +#define SHIFT_DIV_FACTOR 16
> +
> +/**
> + * struct sg2042_clk_data - Common data of clock-controller
> + * @iobase: base address of clock-controller
> + * @onecell_data: used for adding providers.
> + *
> + * Note: this structure will be used both by clkgen & sysclk.
> + */
> +struct sg2042_clk_data {
> + void __iomem *iobase;
> + struct clk_hw_onecell_data onecell_data;
> +};
> +
> +/**
> + * struct sg2042_pll_clock - PLL clock
> + * @hw: clk_hw for initialization
> + * @id: used to map clk_onecell_data
> + * @base: used for readl/writel.
> + * **NOTE**: PLL registers are all in SYS_CTRL!
> + * @lock: spinlock to protect register access, modification
> + * of frequency can only be served one at the time.
> + * @offset_status: offset of pll status registers
> + * @offset_enable: offset of pll enable registers
> + * @offset_ctrl: offset of pll control registers
> + * @shift_status_lock: shift of XXX_LOCK in pll status register
> + * @shift_status_updating: shift of UPDATING_XXX in pll status register
> + * @shift_enable: shift of XXX_CLK_EN in pll enable register
> + */
> +struct sg2042_pll_clock {
> + struct clk_hw hw;
> +
> + unsigned int id;
> + void __iomem *base;
> + /* protect register access */
> + spinlock_t *lock;
> +
> + u32 offset_status;
> + u32 offset_enable;
> + u32 offset_ctrl;
> + u8 shift_status_lock;
> + u8 shift_status_updating;
> + u8 shift_enable;
> +};
> +
> +#define to_sg2042_pll_clk(_hw) container_of(_hw, struct sg2042_pll_clock, hw)
> +
> +/**
> + * struct sg2042_divider_clock - Divider clock
> + * @hw: clk_hw for initialization
> + * @id: used to map clk_onecell_data
> + * @reg: used for readl/writel.
> + * **NOTE**: DIV registers are ALL in CLOCK!
> + * @lock: spinlock to protect register access, modification of
> + * frequency can only be served one at the time
> + * @offset_ctrl: offset of divider control registers
> + * @shift: shift of "Clock Divider Factor" in divider control register
> + * @width: width of "Clock Divider Factor" in divider control register
> + * @div_flags: private flags for this clock, not for framework-specific
> + * @initval: In the divider control register, we can configure whether
> + * to use the value of "Clock Divider Factor" or just use
> + * the initial value pre-configured by IC. BIT[3] controls
> + * this and by default (value is 0), means initial value
> + * is used.
> + * **NOTE** that we cannot read the initial value (default
> + * value when poweron) and default value of "Clock Divider
> + * Factor" is zero, which I think is a hardware design flaw
> + * and should be sync-ed with the initial value. So in
> + * software we have to add a configuration item (initval)
> + * to manually configure this value and use it when BIT[3]
> + * is zero.
> + */
> +struct sg2042_divider_clock {
> + struct clk_hw hw;
> +
> + unsigned int id;
> +
> + void __iomem *reg;
> + /* protect register access */
> + spinlock_t *lock;
> +
> + u32 offset_ctrl;
> + u8 shift;
> + u8 width;
> + u8 div_flags;
> + u32 initval;
> +};
> +
> +#define to_sg2042_clk_divider(_hw) \
> + container_of(_hw, struct sg2042_divider_clock, hw)
> +
> +/**
> + * struct sg2042_gate_clock - Gate clock
> + * @hw: clk_hw for initialization
> + * @id: used to map clk_onecell_data
> + * @offset_enable: offset of gate enable registers
> + * @bit_idx: which bit in the register controls gating of this clock
> + */
> +struct sg2042_gate_clock {
> + struct clk_hw hw;
> +
> + unsigned int id;
> +
> + u32 offset_enable;
> + u8 bit_idx;
> +};
> +
> +/**
> + * struct sg2042_mux_clock - Mux clock
> + * @hw: clk_hw for initialization
> + * @id: used to map clk_onecell_data
> + * @offset_select: offset of mux selection registers
> + * **NOTE**: MUX registers are ALL in CLOCK!
> + * @shift: shift of "Clock Select" in mux selection register
> + * @width: width of "Clock Select" in mux selection register
> + * @clk_nb: used for notification
> + * @original_index: set by notifier callback
> + */
> +struct sg2042_mux_clock {
> + struct clk_hw hw;
> +
> + unsigned int id;
> +
> + u32 offset_select;
> + u8 shift;
> + u8 width;
> +
> + struct notifier_block clk_nb;
> + u8 original_index;
> +};
> +
> +#define to_sg2042_mux_nb(_nb) container_of(_nb, struct sg2042_mux_clock, clk_nb)
> +
> +#define KHZ 1000UL
> +#define MHZ (KHZ * KHZ)
> +
> +#define REFDIV_MIN 1
> +#define REFDIV_MAX 63
> +#define FBDIV_MIN 16
> +#define FBDIV_MAX 320
> +
> +#define PLL_FREF_SG2042 (25 * MHZ)
> +
> +#define PLL_FOUTPOSTDIV_MIN (16 * MHZ)
> +#define PLL_FOUTPOSTDIV_MAX (3200 * MHZ)
> +
> +#define PLL_FOUTVCO_MIN (800 * MHZ)
> +#define PLL_FOUTVCO_MAX (3200 * MHZ)
> +
> +struct sg2042_pll_ctrl {
> + unsigned long freq;
> + unsigned int fbdiv;
> + unsigned int postdiv1;
> + unsigned int postdiv2;
> + unsigned int refdiv;
> +};
> +
> +#define PLLCTRL_FBDIV_SHIFT 16
> +#define PLLCTRL_FBDIV_MASK (GENMASK(27, 16) >> PLLCTRL_FBDIV_SHIFT)
> +#define PLLCTRL_POSTDIV2_SHIFT 12
> +#define PLLCTRL_POSTDIV2_MASK (GENMASK(14, 12) >> PLLCTRL_POSTDIV2_SHIFT)
> +#define PLLCTRL_POSTDIV1_SHIFT 8
> +#define PLLCTRL_POSTDIV1_MASK (GENMASK(10, 8) >> PLLCTRL_POSTDIV1_SHIFT)
> +#define PLLCTRL_REFDIV_SHIFT 0
> +#define PLLCTRL_REFDIV_MASK (GENMASK(5, 0) >> PLLCTRL_REFDIV_SHIFT)
> +
> +static inline u32 sg2042_pll_ctrl_encode(struct sg2042_pll_ctrl *ctrl)
> +{
> + return ((ctrl->fbdiv & PLLCTRL_FBDIV_MASK) << PLLCTRL_FBDIV_SHIFT) |
> + ((ctrl->postdiv2 & PLLCTRL_POSTDIV2_MASK) << PLLCTRL_POSTDIV2_SHIFT) |
> + ((ctrl->postdiv1 & PLLCTRL_POSTDIV1_MASK) << PLLCTRL_POSTDIV1_SHIFT) |
> + ((ctrl->refdiv & PLLCTRL_REFDIV_MASK) << PLLCTRL_REFDIV_SHIFT);
> +}
> +
> +static inline void sg2042_pll_ctrl_decode(unsigned int reg_value,
> + struct sg2042_pll_ctrl *ctrl)
> +{
> + ctrl->fbdiv = (reg_value >> PLLCTRL_FBDIV_SHIFT) & PLLCTRL_FBDIV_MASK;
> + ctrl->refdiv = (reg_value >> PLLCTRL_REFDIV_SHIFT) & PLLCTRL_REFDIV_MASK;
> + ctrl->postdiv1 = (reg_value >> PLLCTRL_POSTDIV1_SHIFT) & PLLCTRL_POSTDIV1_MASK;
> + ctrl->postdiv2 = (reg_value >> PLLCTRL_POSTDIV2_SHIFT) & PLLCTRL_POSTDIV2_MASK;
> +}
> +
> +static inline int sg2042_pll_enable(struct sg2042_pll_clock *pll, bool en)
> +{
> + u32 value;
> +
> + if (en) {
> + /* wait pll lock */
> + if (readl_poll_timeout_atomic(pll->base + pll->offset_status,
> + value,
> + ((value >> pll->shift_status_lock) & 0x1),
> + 0,
> + 100000))
> + pr_warn("%s not locked\n", pll->hw.init->name);
> +
> + /* wait pll updating */
> + if (readl_poll_timeout_atomic(pll->base + pll->offset_status,
> + value,
> + !((value >> pll->shift_status_updating) & 0x1),
> + 0,
> + 100000))
> + pr_warn("%s still updating\n", pll->hw.init->name);
> +
> + /* enable pll */
> + value = readl(pll->base + pll->offset_enable);
> + writel(value | (1 << pll->shift_enable), pll->base + pll->offset_enable);
> + } else {
> + /* disable pll */
> + value = readl(pll->base + pll->offset_enable);
> + writel(value & (~(1 << pll->shift_enable)), pll->base + pll->offset_enable);
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * sg2042_pll_recalc_rate() - Calculate rate for plls
> + * @reg_value: current register value
> + * @parent_rate: parent frequency
> + *
> + * This function is used to calculate below "rate" in equation
> + * rate = (parent_rate/REFDIV) x FBDIV/POSTDIV1/POSTDIV2
> + * = (parent_rate x FBDIV) / (REFDIV x POSTDIV1 x POSTDIV2)
> + *
> + * Return: The rate calculated.
> + */
> +static unsigned long sg2042_pll_recalc_rate(unsigned int reg_value,
> + unsigned long parent_rate)
> +{
> + struct sg2042_pll_ctrl ctrl_table;
> + u64 numerator, denominator;
> +
> + sg2042_pll_ctrl_decode(reg_value, &ctrl_table);
> +
> + numerator = parent_rate * ctrl_table.fbdiv;
> + denominator = ctrl_table.refdiv * ctrl_table.postdiv1 * ctrl_table.postdiv2;
> + do_div(numerator, denominator);
> + return numerator;
> +}
> +
> +/**
> + * sg2042_pll_get_postdiv_1_2() - Based on input rate/prate/fbdiv/refdiv,
> + * look up the postdiv1_2 table to get the closest postdiiv combination.
> + * @rate: FOUTPOSTDIV
> + * @prate: parent rate, i.e. FREF
> + * @fbdiv: FBDIV
> + * @refdiv: REFDIV
> + * @postdiv1: POSTDIV1, output
> + * @postdiv2: POSTDIV2, output
> + *
> + * postdiv1_2 contains all the possible combination lists of POSTDIV1 and POSTDIV2
> + * for example:
> + * postdiv1_2[0] = {2, 4, 8}, where div1 = 2, div2 = 4 , div1 * div2 = 8
> + *
> + * See TRM:
> + * FOUTPOSTDIV = FREF * FBDIV / REFDIV / (POSTDIV1 * POSTDIV2)
> + * So we get following formula to get POSTDIV1 and POSTDIV2:
> + * POSTDIV = (prate/REFDIV) x FBDIV/rate
> + * above POSTDIV = POSTDIV1*POSTDIV2
> + *
> + * Return:
> + * %0 - OK
> + * %-EINVAL - invalid argument, which means Failed to get the postdivs.
> + */
> +static int sg2042_pll_get_postdiv_1_2(unsigned long rate,
> + unsigned long prate,
> + unsigned int fbdiv,
> + unsigned int refdiv,
> + unsigned int *postdiv1,
> + unsigned int *postdiv2)
> +{
> + int index;
> + u64 tmp0;
> +
> + /* POSTDIV_RESULT_INDEX point to 3rd element in the array postdiv1_2 */
> + #define POSTDIV_RESULT_INDEX 2
> +
> + static const int postdiv1_2[][3] = {
> + {2, 4, 8}, {3, 3, 9}, {2, 5, 10}, {2, 6, 12},
> + {2, 7, 14}, {3, 5, 15}, {4, 4, 16}, {3, 6, 18},
> + {4, 5, 20}, {3, 7, 21}, {4, 6, 24}, {5, 5, 25},
> + {4, 7, 28}, {5, 6, 30}, {5, 7, 35}, {6, 6, 36},
> + {6, 7, 42}, {7, 7, 49}
> + };
> +
> + /* prate/REFDIV and result save to tmp0 */
> + tmp0 = prate;
> + do_div(tmp0, refdiv);
> +
> + /* ((prate/REFDIV) x FBDIV) and result save to tmp0 */
> + tmp0 *= fbdiv;
> +
> + /* ((prate/REFDIV) x FBDIV)/rate and result save to tmp0 */
> + do_div(tmp0, rate);
> +
> + /* tmp0 is POSTDIV1*POSTDIV2, now we calculate div1 and div2 value */
> + if (tmp0 <= 7) {
> + /* (div1 * div2) <= 7, no need to use array search */
> + *postdiv1 = tmp0;
> + *postdiv2 = 1;
> + return 0;
> + }
> +
> + /* (div1 * div2) > 7, use array search */
> + for (index = 0; index < ARRAY_SIZE(postdiv1_2); index++) {
> + if (tmp0 > postdiv1_2[index][POSTDIV_RESULT_INDEX]) {
> + continue;
> + } else {
> + /* found it */
> + *postdiv1 = postdiv1_2[index][1];
> + *postdiv2 = postdiv1_2[index][0];
> + return 0;
> + }
> + }
> + pr_warn("%s can not find in postdiv array!\n", __func__);
> + return -EINVAL;
> +}
> +
> +/**
> + * sg2042_get_pll_ctl_setting() - Based on the given FOUTPISTDIV and the input
> + * FREF to calculate the REFDIV/FBDIV/PSTDIV1/POSTDIV2 combination for pllctrl
> + * register.
> + * @req_rate: expected output clock rate, i.e. FOUTPISTDIV
> + * @parent_rate: input parent clock rate, i.e. FREF
> + * @best: output to hold calculated combination of REFDIV/FBDIV/PSTDIV1/POSTDIV2
> + *
> + * Return:
> + * %0 - OK
> + * %-EINVAL - invalid argument
> + */
> +static int sg2042_get_pll_ctl_setting(struct sg2042_pll_ctrl *best,
> + unsigned long req_rate,
> + unsigned long parent_rate)
> +{
> + int ret;
> + unsigned int fbdiv, refdiv, postdiv1, postdiv2;
> + unsigned long foutpostdiv;
> + u64 tmp;
> + u64 foutvco;
> +
> + if (parent_rate != PLL_FREF_SG2042) {
> + pr_err("INVALID FREF: %ld\n", parent_rate);
> + return -EINVAL;
> + }
> +
> + if (req_rate < PLL_FOUTPOSTDIV_MIN || req_rate > PLL_FOUTPOSTDIV_MAX) {
> + pr_alert("INVALID FOUTPOSTDIV: %ld\n", req_rate);
> + return -EINVAL;
> + }
> +
> + memset(best, 0, sizeof(struct sg2042_pll_ctrl));
> +
> + for (refdiv = REFDIV_MIN; refdiv < REFDIV_MAX + 1; refdiv++) {
> + /* required by hardware: FREF/REFDIV must > 10 */
> + tmp = parent_rate;
> + do_div(tmp, refdiv);
> + if (tmp <= 10)
> + continue;
> +
> + for (fbdiv = FBDIV_MIN; fbdiv < FBDIV_MAX + 1; fbdiv++) {
> + /*
> + * FOUTVCO = FREF*FBDIV/REFDIV validation
> + * required by hardware, FOUTVCO must [800MHz, 3200MHz]
> + */
> + foutvco = parent_rate * fbdiv;
> + do_div(foutvco, refdiv);
> + if (foutvco < PLL_FOUTVCO_MIN || foutvco > PLL_FOUTVCO_MAX)
> + continue;
> +
> + ret = sg2042_pll_get_postdiv_1_2(req_rate, parent_rate,
> + fbdiv, refdiv,
> + &postdiv1, &postdiv2);
> + if (ret)
> + continue;
> +
> + /*
> + * FOUTPOSTDIV = FREF*FBDIV/REFDIV/(POSTDIV1*POSTDIV2)
> + * = FOUTVCO/(POSTDIV1*POSTDIV2)
> + */
> + tmp = foutvco;
> + do_div(tmp, (postdiv1 * postdiv2));
> + foutpostdiv = (unsigned long)tmp;
> + /* Iterative to approach the expected value */
> + if (abs_diff(foutpostdiv, req_rate) < abs_diff(best->freq, req_rate)) {
> + best->freq = foutpostdiv;
> + best->refdiv = refdiv;
> + best->fbdiv = fbdiv;
> + best->postdiv1 = postdiv1;
> + best->postdiv2 = postdiv2;
> + if (foutpostdiv == req_rate)
> + return 0;
> + }
> + continue;
> + }
> + }
> +
> + if (best->freq == 0)
> + return -EINVAL;
> + else
> + return 0;
> +}
> +
> +/**
> + * sg2042_clk_pll_recalc_rate() - recalc_rate callback for pll clks
> + * @hw: ccf use to hook get sg2042_pll_clock
> + * @parent_rate: parent rate
> + *
> + * The is function will be called through clk_get_rate
> + * and return current rate after decoding reg value
> + *
> + * Return: Current rate recalculated.
> + */
> +static unsigned long sg2042_clk_pll_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + u32 value;
> + unsigned long rate;
> + struct sg2042_pll_clock *pll = to_sg2042_pll_clk(hw);
> +
> + value = readl(pll->base + pll->offset_ctrl);
> + rate = sg2042_pll_recalc_rate(value, parent_rate);
> +
> + pr_debug("--> %s: pll_recalc_rate: val = %ld\n",
> + clk_hw_get_name(hw), rate);
> + return rate;
> +}
> +
> +static long sg2042_clk_pll_round_rate(struct clk_hw *hw,
> + unsigned long req_rate,
> + unsigned long *prate)
> +{
> + unsigned int value;
> + struct sg2042_pll_ctrl pctrl_table;
> + long proper_rate;
> + int ret;
> +
> + ret = sg2042_get_pll_ctl_setting(&pctrl_table, req_rate, *prate);
> + if (ret) {
> + proper_rate = 0;
> + goto out;
> + }
> +
> + value = sg2042_pll_ctrl_encode(&pctrl_table);
> + proper_rate = (long)sg2042_pll_recalc_rate(value, *prate);
> +
> +out:
> + pr_debug("--> %s: pll_round_rate: val = %ld\n",
> + clk_hw_get_name(hw), proper_rate);
> + return proper_rate;
> +}
> +
> +static int sg2042_clk_pll_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + req->rate = sg2042_clk_pll_round_rate(hw, min(req->rate, req->max_rate),
> + &req->best_parent_rate);
> + pr_debug("--> %s: pll_determine_rate: val = %ld\n",
> + clk_hw_get_name(hw), req->rate);
> + return 0;
> +}
> +
> +static int sg2042_clk_pll_set_rate(struct clk_hw *hw,
> + unsigned long rate,
> + unsigned long parent_rate)
> +{
> + unsigned long flags;
> + u32 value;
> + int ret = 0;
> + struct sg2042_pll_ctrl pctrl_table;
> + struct sg2042_pll_clock *pll = to_sg2042_pll_clk(hw);
> +
> + spin_lock_irqsave(pll->lock, flags);
> + if (sg2042_pll_enable(pll, 0)) {
> + pr_warn("Can't disable pll(%s), status error\n", pll->hw.init->name);
> + goto out;
> + }
> + ret = sg2042_get_pll_ctl_setting(&pctrl_table, rate, parent_rate);
> + if (ret) {
> + pr_warn("%s: Can't find a proper pll setting\n", pll->hw.init->name);
> + goto out2;
> + }
> +
> + value = sg2042_pll_ctrl_encode(&pctrl_table);
> +
> + /* write the value to top register */
> + writel(value, pll->base + pll->offset_ctrl);
> +
> +out2:
> + sg2042_pll_enable(pll, 1);
> +out:
> + spin_unlock_irqrestore(pll->lock, flags);
> +
> + pr_debug("--> %s: pll_set_rate: val = 0x%x\n",
> + clk_hw_get_name(hw), value);
> + return ret;
> +}
> +
> +static const struct clk_ops sg2042_clk_pll_ops = {
> + .recalc_rate = sg2042_clk_pll_recalc_rate,
> + .round_rate = sg2042_clk_pll_round_rate,
> + .determine_rate = sg2042_clk_pll_determine_rate,
> + .set_rate = sg2042_clk_pll_set_rate,
> +};
> +
> +static const struct clk_ops sg2042_clk_pll_ro_ops = {
> + .recalc_rate = sg2042_clk_pll_recalc_rate,
> + .round_rate = sg2042_clk_pll_round_rate,
> +};
> +
> +static unsigned long sg2042_clk_divider_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
> + u32 val;
> + unsigned long ret_rate;
> +
> + if (!(readl(divider->reg) & BIT(SHIFT_DIV_FACTOR_SEL))) {
> + val = divider->initval;
> + } else {
> + val = readl(divider->reg) >> divider->shift;
> + val &= clk_div_mask(divider->width);
> + }
> +
> + ret_rate = divider_recalc_rate(hw, parent_rate, val, NULL,
> + divider->div_flags, divider->width);
> +
> + pr_debug("--> %s: divider_recalc_rate: ret_rate = %ld\n",
> + clk_hw_get_name(hw), ret_rate);
> + return ret_rate;
> +}
> +
> +static long sg2042_clk_divider_round_rate(struct clk_hw *hw,
> + unsigned long rate,
> + unsigned long *prate)
> +{
> + u32 bestdiv;
> + unsigned long ret_rate;
> + struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
> +
> + /* if read only, just return current value */
> + if (divider->div_flags & CLK_DIVIDER_READ_ONLY) {
> + if (!(readl(divider->reg) & BIT(SHIFT_DIV_FACTOR_SEL))) {
> + bestdiv = divider->initval;
> + } else {
> + bestdiv = readl(divider->reg) >> divider->shift;
> + bestdiv &= clk_div_mask(divider->width);
> + }
> + ret_rate = DIV_ROUND_UP_ULL((u64)*prate, bestdiv);
> + } else {
> + ret_rate = divider_round_rate(hw, rate, prate, NULL,
> + divider->width, divider->div_flags);
> + }
> +
> + pr_debug("--> %s: divider_round_rate: val = %ld\n",
> + clk_hw_get_name(hw), ret_rate);
> + return ret_rate;
> +}
> +
> +static int sg2042_clk_divider_set_rate(struct clk_hw *hw,
> + unsigned long rate,
> + unsigned long parent_rate)
> +{
> + u32 value;
> + u32 val, val2;
> + unsigned long flags = 0;
> + struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
> +
> + value = divider_get_val(rate, parent_rate, NULL,
> + divider->width, divider->div_flags);
> +
> + if (divider->lock)
> + spin_lock_irqsave(divider->lock, flags);
> + else
> + __acquire(divider->lock);
> +
> + /*
> + * The sequence of clock frequency modification is:
> + * Assert to reset divider.
> + * Modify the value of Clock Divide Factor (and High Wide if needed).
> + * De-assert to restore divided clock with new frequency.
> + */
> + val = readl(divider->reg);
> +
> + /* assert */
> + val &= ~BIT(SHIFT_DIV_RESET_CTRL);
> + writel(val, divider->reg);
> +
> + if (divider->div_flags & CLK_DIVIDER_HIWORD_MASK) {
> + val = clk_div_mask(divider->width) << (divider->shift + 16);
> + } else {
> + val = readl(divider->reg);
> + val &= ~(clk_div_mask(divider->width) << divider->shift);
> + }
> + val |= value << divider->shift;
> + val |= BIT(SHIFT_DIV_FACTOR_SEL);
> + writel(val, divider->reg);
> + val2 = val;
> +
> + /* de-assert */
> + val |= BIT(SHIFT_DIV_RESET_CTRL);
> + writel(val, divider->reg);
> +
> + if (divider->lock)
> + spin_unlock_irqrestore(divider->lock, flags);
> + else
> + __release(divider->lock);
> +
> + pr_debug("--> %s: divider_set_rate: register val = 0x%x\n",
> + clk_hw_get_name(hw), val2);
> + return 0;
> +}
> +
> +static const struct clk_ops sg2042_clk_divider_ops = {
> + .recalc_rate = sg2042_clk_divider_recalc_rate,
> + .round_rate = sg2042_clk_divider_round_rate,
> + .set_rate = sg2042_clk_divider_set_rate,
> +};
> +
> +static const struct clk_ops sg2042_clk_divider_ro_ops = {
> + .recalc_rate = sg2042_clk_divider_recalc_rate,
> + .round_rate = sg2042_clk_divider_round_rate,
> +};
> +
> +#define SG2042_PLL(_id, _name, _parent_name, _r_stat, _r_enable, _r_ctrl, _shift) \
> + { \
> + .hw.init = CLK_HW_INIT( \
> + _name, \
> + _parent_name, \
> + &sg2042_clk_pll_ops, \
> + CLK_GET_RATE_NOCACHE | CLK_GET_ACCURACY_NOCACHE),\
> + .id = _id, \
> + .offset_ctrl = _r_ctrl, \
> + .offset_status = _r_stat, \
> + .offset_enable = _r_enable, \
> + .shift_status_lock = 8 + (_shift), \
> + .shift_status_updating = _shift, \
> + .shift_enable = _shift, \
> + }
> +
> +#define SG2042_PLL_RO(_id, _name, _parent_name, _r_stat, _r_enable, _r_ctrl, _shift) \
> + { \
> + .hw.init = CLK_HW_INIT( \
> + _name, \
> + _parent_name, \
> + &sg2042_clk_pll_ro_ops, \
> + CLK_GET_RATE_NOCACHE | CLK_GET_ACCURACY_NOCACHE),\
> + .id = _id, \
> + .offset_ctrl = _r_ctrl, \
> + .offset_status = _r_stat, \
> + .offset_enable = _r_enable, \
> + .shift_status_lock = 8 + (_shift), \
> + .shift_status_updating = _shift, \
> + .shift_enable = _shift, \
> + }
> +
> +static struct sg2042_pll_clock sg2042_pll_clks[] = {
> + SG2042_PLL(MPLL_CLK, "mpll_clock", "cgi_main",
> + R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_MPLL_CONTROL, 0),
> + SG2042_PLL_RO(FPLL_CLK, "fpll_clock", "cgi_main",
> + R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_FPLL_CONTROL, 3),
> + SG2042_PLL_RO(DPLL0_CLK, "dpll0_clock", "cgi_dpll0",
> + R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_DPLL0_CONTROL, 4),
> + SG2042_PLL_RO(DPLL1_CLK, "dpll1_clock", "cgi_dpll1",
> + R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_DPLL1_CONTROL, 5),
> +};
> +
> +#define SG2042_DIV(_id, _name, _parent_name, \
> + _r_ctrl, _shift, _width, \
> + _div_flag, _initval) { \
> + .hw.init = CLK_HW_INIT( \
> + _name, \
> + _parent_name, \
> + &sg2042_clk_divider_ops, \
> + 0), \
> + .id = _id, \
> + .offset_ctrl = _r_ctrl, \
> + .shift = _shift, \
> + .width = _width, \
> + .div_flags = _div_flag, \
> + .initval = _initval, \
> + }
> +
> +#define SG2042_DIV_RO(_id, _name, _parent_name, \
> + _r_ctrl, _shift, _width, \
> + _div_flag, _initval) { \
> + .hw.init = CLK_HW_INIT( \
> + _name, \
> + _parent_name, \
> + &sg2042_clk_divider_ro_ops, \
> + 0), \
> + .id = _id, \
> + .offset_ctrl = _r_ctrl, \
> + .shift = _shift, \
> + .width = _width, \
> + .div_flags = (_div_flag) | CLK_DIVIDER_READ_ONLY, \
> + .initval = _initval, \
> + }
> +
> +/*
> + * DIV items in the array are sorted according to the clock-tree diagram,
> + * from top to bottom, from upstream to downstream. Read TRM for details.
> + */
> +#define DEF_DIVFLAG (CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO)
> +static struct sg2042_divider_clock sg2042_div_clks[] = {
> + SG2042_DIV_RO(DIV_CLK_DPLL0_DDR01_0,
> + "clk_div_ddr01_0", "clk_gate_ddr01_div0",
> + R_CLKDIVREG27, 16, 5, DEF_DIVFLAG, 1),
> + SG2042_DIV_RO(DIV_CLK_FPLL_DDR01_1,
> + "clk_div_ddr01_1", "clk_gate_ddr01_div1",
> + R_CLKDIVREG28, 16, 5, DEF_DIVFLAG, 1),
> +
> + SG2042_DIV_RO(DIV_CLK_DPLL1_DDR23_0,
> + "clk_div_ddr23_0", "clk_gate_ddr23_div0",
> + R_CLKDIVREG29, 16, 5, DEF_DIVFLAG, 1),
> + SG2042_DIV_RO(DIV_CLK_FPLL_DDR23_1,
> + "clk_div_ddr23_1", "clk_gate_ddr23_div1",
> + R_CLKDIVREG30, 16, 5, DEF_DIVFLAG, 1),
> +
> + SG2042_DIV(DIV_CLK_MPLL_RP_CPU_NORMAL_0,
> + "clk_div_rp_cpu_normal_0", "clk_gate_rp_cpu_normal_div0",
> + R_CLKDIVREG0, 16, 5, DEF_DIVFLAG, 1),
> + SG2042_DIV(DIV_CLK_FPLL_RP_CPU_NORMAL_1,
> + "clk_div_rp_cpu_normal_1", "clk_gate_rp_cpu_normal_div1",
> + R_CLKDIVREG1, 16, 5, DEF_DIVFLAG, 1),
> +
> + SG2042_DIV(DIV_CLK_MPLL_AXI_DDR_0,
> + "clk_div_axi_ddr_0", "clk_gate_axi_ddr_div0",
> + R_CLKDIVREG25, 16, 5, DEF_DIVFLAG, 2),
> + SG2042_DIV(DIV_CLK_FPLL_AXI_DDR_1,
> + "clk_div_axi_ddr_1", "clk_gate_axi_ddr_div1",
> + R_CLKDIVREG26, 16, 5, DEF_DIVFLAG, 1),
> +
> + SG2042_DIV(DIV_CLK_FPLL_TOP_RP_CMN_DIV2,
> + "clk_div_top_rp_cmn_div2", "clk_mux_rp_cpu_normal",
> + R_CLKDIVREG3, 16, 16, DEF_DIVFLAG, 2),
> +
> + SG2042_DIV(DIV_CLK_FPLL_50M_A53, "clk_div_50m_a53", "fpll_clock",
> + R_CLKDIVREG2, 16, 8, DEF_DIVFLAG, 20),
> + /* downstream of div_50m_a53 */
> + SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER1, "clk_div_timer1", "clk_div_50m_a53",
> + R_CLKDIVREG6, 16, 16, DEF_DIVFLAG, 1),
> + SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER2, "clk_div_timer2", "clk_div_50m_a53",
> + R_CLKDIVREG7, 16, 16, DEF_DIVFLAG, 1),
> + SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER3, "clk_div_timer3", "clk_div_50m_a53",
> + R_CLKDIVREG8, 16, 16, DEF_DIVFLAG, 1),
> + SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER4, "clk_div_timer4", "clk_div_50m_a53",
> + R_CLKDIVREG9, 16, 16, DEF_DIVFLAG, 1),
> + SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER5, "clk_div_timer5", "clk_div_50m_a53",
> + R_CLKDIVREG10, 16, 16, DEF_DIVFLAG, 1),
> + SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER6, "clk_div_timer6", "clk_div_50m_a53",
> + R_CLKDIVREG11, 16, 16, DEF_DIVFLAG, 1),
> + SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER7, "clk_div_timer7", "clk_div_50m_a53",
> + R_CLKDIVREG12, 16, 16, DEF_DIVFLAG, 1),
> + SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER8, "clk_div_timer8", "clk_div_50m_a53",
> + R_CLKDIVREG13, 16, 16, DEF_DIVFLAG, 1),
> +
> + /*
> + * Set clk_div_uart_500m as RO, because the width of CLKDIVREG4 is too
> + * narrow for us to produce 115200. Use UART internal divider directly.
> + */
> + SG2042_DIV_RO(DIV_CLK_FPLL_UART_500M, "clk_div_uart_500m", "fpll_clock",
> + R_CLKDIVREG4, 16, 7, DEF_DIVFLAG, 2),
> + SG2042_DIV(DIV_CLK_FPLL_AHB_LPC, "clk_div_ahb_lpc", "fpll_clock",
> + R_CLKDIVREG5, 16, 16, DEF_DIVFLAG, 5),
> + SG2042_DIV(DIV_CLK_FPLL_EFUSE, "clk_div_efuse", "fpll_clock",
> + R_CLKDIVREG14, 16, 7, DEF_DIVFLAG, 40),
> + SG2042_DIV(DIV_CLK_FPLL_TX_ETH0, "clk_div_tx_eth0", "fpll_clock",
> + R_CLKDIVREG16, 16, 11, DEF_DIVFLAG, 8),
> + SG2042_DIV(DIV_CLK_FPLL_PTP_REF_I_ETH0,
> + "clk_div_ptp_ref_i_eth0", "fpll_clock",
> + R_CLKDIVREG17, 16, 8, DEF_DIVFLAG, 20),
> + SG2042_DIV(DIV_CLK_FPLL_REF_ETH0, "clk_div_ref_eth0", "fpll_clock",
> + R_CLKDIVREG18, 16, 8, DEF_DIVFLAG, 40),
> + SG2042_DIV(DIV_CLK_FPLL_EMMC, "clk_div_emmc", "fpll_clock",
> + R_CLKDIVREG19, 16, 5, DEF_DIVFLAG, 10),
> + SG2042_DIV(DIV_CLK_FPLL_SD, "clk_div_sd", "fpll_clock",
> + R_CLKDIVREG21, 16, 5, DEF_DIVFLAG, 10),
> +
> + SG2042_DIV(DIV_CLK_FPLL_TOP_AXI0, "clk_div_top_axi0", "fpll_clock",
> + R_CLKDIVREG23, 16, 5, DEF_DIVFLAG, 10),
> + /* downstream of div_top_axi0 */
> + SG2042_DIV(DIV_CLK_FPLL_100K_EMMC, "clk_div_100k_emmc", "clk_div_top_axi0",
> + R_CLKDIVREG20, 16, 16, DEF_DIVFLAG, 1000),
> + SG2042_DIV(DIV_CLK_FPLL_100K_SD, "clk_div_100k_sd", "clk_div_top_axi0",
> + R_CLKDIVREG22, 16, 16, DEF_DIVFLAG, 1000),
> + SG2042_DIV(DIV_CLK_FPLL_GPIO_DB, "clk_div_gpio_db", "clk_div_top_axi0",
> + R_CLKDIVREG15, 16, 16, DEF_DIVFLAG, 1000),
> +
> + SG2042_DIV(DIV_CLK_FPLL_TOP_AXI_HSPERI,
> + "clk_div_top_axi_hsperi", "fpll_clock",
> + R_CLKDIVREG24, 16, 5, DEF_DIVFLAG, 4),
> +};
> +
> +#define SG2042_GATE(_id, _name, _parent_name, _flags, \
> + _r_enable, _bit_idx) { \
> + .hw.init = CLK_HW_INIT( \
> + _name, \
> + _parent_name, \
> + NULL, \
> + _flags), \
> + .id = _id, \
> + .offset_enable = _r_enable, \
> + .bit_idx = _bit_idx, \
> + }
> +
> +/*
> + * GATE items in the array are sorted according to the clock-tree diagram,
> + * from top to bottom, from upstream to downstream. Read TRM for details.
> + */
> +
> +/* Gate clocks which control registers are defined in CLOCK. */
> +static const struct sg2042_gate_clock sg2042_gate_clks[] = {
> + SG2042_GATE(GATE_CLK_DDR01_DIV0, "clk_gate_ddr01_div0", "dpll0_clock",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> + R_CLKDIVREG27, 4),
> + SG2042_GATE(GATE_CLK_DDR01_DIV1, "clk_gate_ddr01_div1", "fpll_clock",
> + CLK_IS_CRITICAL,
> + R_CLKDIVREG28, 4),
> +
> + SG2042_GATE(GATE_CLK_DDR23_DIV0, "clk_gate_ddr23_div0", "dpll1_clock",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> + R_CLKDIVREG29, 4),
> + SG2042_GATE(GATE_CLK_DDR23_DIV1, "clk_gate_ddr23_div1", "fpll_clock",
> + CLK_IS_CRITICAL,
> + R_CLKDIVREG30, 4),
> +
> + SG2042_GATE(GATE_CLK_RP_CPU_NORMAL_DIV0, "clk_gate_rp_cpu_normal_div0", "mpll_clock",
> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> + R_CLKDIVREG0, 4),
> + SG2042_GATE(GATE_CLK_RP_CPU_NORMAL_DIV1,
> + "clk_gate_rp_cpu_normal_div1", "fpll_clock",
> + CLK_IS_CRITICAL,
> + R_CLKDIVREG1, 4),
> +
> + SG2042_GATE(GATE_CLK_AXI_DDR_DIV0, "clk_gate_axi_ddr_div0", "mpll_clock",
> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> + R_CLKDIVREG25, 4),
> + SG2042_GATE(GATE_CLK_AXI_DDR_DIV1, "clk_gate_axi_ddr_div1", "fpll_clock",
> + CLK_IS_CRITICAL,
> + R_CLKDIVREG26, 4),
> +
> + /* upon are gate clocks as input source for the muxes */
> +
> + SG2042_GATE(GATE_CLK_DDR01, "clk_gate_ddr01", "clk_mux_ddr01",
> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> + R_CLKENREG1, 14),
> +
> + SG2042_GATE(GATE_CLK_DDR23, "clk_gate_ddr23", "clk_mux_ddr23",
> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> + R_CLKENREG1, 15),
> +
> + SG2042_GATE(GATE_CLK_RP_CPU_NORMAL,
> + "clk_gate_rp_cpu_normal", "clk_mux_rp_cpu_normal",
> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> + R_CLKENREG0, 0),
> +
> + SG2042_GATE(GATE_CLK_AXI_DDR, "clk_gate_axi_ddr", "clk_mux_axi_ddr",
> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> + R_CLKENREG1, 13),
> +
> + /* upon are gate clocks directly downstream of muxes */
> +
> + /* downstream of clk_div_top_rp_cmn_div2 */
> + SG2042_GATE(GATE_CLK_TOP_RP_CMN_DIV2,
> + "clk_gate_top_rp_cmn_div2", "clk_div_top_rp_cmn_div2",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 2),
> + SG2042_GATE(GATE_CLK_HSDMA, "clk_gate_hsdma", "clk_gate_top_rp_cmn_div2",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 10),
> +
> + /*
> + * downstream of clk_gate_rp_cpu_normal
> + *
> + * FIXME: there should be one 1/2 DIV between clk_gate_rp_cpu_normal
> + * and clk_gate_axi_pcie0/clk_gate_axi_pcie1.
> + * But the 1/2 DIV is fixed and no configurable register exported, so
> + * when reading from these two clocks, the rate value are still the
> + * same as that of clk_gate_rp_cpu_normal, it's not correct.
> + * This just affects the value read.
> + */
> + SG2042_GATE(GATE_CLK_AXI_PCIE0,
> + "clk_gate_axi_pcie0", "clk_gate_rp_cpu_normal",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG1, 8),
> + SG2042_GATE(GATE_CLK_AXI_PCIE1,
> + "clk_gate_axi_pcie1", "clk_gate_rp_cpu_normal",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG1, 9),
> +
> + /* downstream of div_50m_a53 */
> + SG2042_GATE(GATE_CLK_A53_50M, "clk_gate_a53_50m", "clk_div_50m_a53",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 1),
> + SG2042_GATE(GATE_CLK_TIMER1, "clk_gate_timer1", "clk_div_timer1",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 12),
> + SG2042_GATE(GATE_CLK_TIMER2, "clk_gate_timer2", "clk_div_timer2",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 13),
> + SG2042_GATE(GATE_CLK_TIMER3, "clk_gate_timer3", "clk_div_timer3",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 14),
> + SG2042_GATE(GATE_CLK_TIMER4, "clk_gate_timer4", "clk_div_timer4",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 15),
> + SG2042_GATE(GATE_CLK_TIMER5, "clk_gate_timer5", "clk_div_timer5",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 16),
> + SG2042_GATE(GATE_CLK_TIMER6, "clk_gate_timer6", "clk_div_timer6",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 17),
> + SG2042_GATE(GATE_CLK_TIMER7, "clk_gate_timer7", "clk_div_timer7",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 18),
> + SG2042_GATE(GATE_CLK_TIMER8, "clk_gate_timer8", "clk_div_timer8",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 19),
> +
> + /* gate clocks downstream from div clocks one-to-one */
> + SG2042_GATE(GATE_CLK_UART_500M, "clk_gate_uart_500m", "clk_div_uart_500m",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 4),
> + SG2042_GATE(GATE_CLK_AHB_LPC, "clk_gate_ahb_lpc", "clk_div_ahb_lpc",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 7),
> + SG2042_GATE(GATE_CLK_EFUSE, "clk_gate_efuse", "clk_div_efuse",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 20),
> + SG2042_GATE(GATE_CLK_TX_ETH0, "clk_gate_tx_eth0", "clk_div_tx_eth0",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 30),
> + SG2042_GATE(GATE_CLK_PTP_REF_I_ETH0,
> + "clk_gate_ptp_ref_i_eth0", "clk_div_ptp_ref_i_eth0",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 0),
> + SG2042_GATE(GATE_CLK_REF_ETH0, "clk_gate_ref_eth0", "clk_div_ref_eth0",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 1),
> + SG2042_GATE(GATE_CLK_EMMC_100M, "clk_gate_emmc", "clk_div_emmc",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 3),
> + SG2042_GATE(GATE_CLK_SD_100M, "clk_gate_sd", "clk_div_sd",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 6),
> +
> + /* downstream of clk_div_top_axi0 */
> + SG2042_GATE(GATE_CLK_AHB_ROM, "clk_gate_ahb_rom", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 8),
> + SG2042_GATE(GATE_CLK_AHB_SF, "clk_gate_ahb_sf", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 9),
> + SG2042_GATE(GATE_CLK_AXI_SRAM, "clk_gate_axi_sram", "clk_div_top_axi0",
> + CLK_IGNORE_UNUSED, R_CLKENREG0, 10),
> + SG2042_GATE(GATE_CLK_APB_TIMER, "clk_gate_apb_timer", "clk_div_top_axi0",
> + CLK_IGNORE_UNUSED, R_CLKENREG0, 11),
> + SG2042_GATE(GATE_CLK_APB_EFUSE, "clk_gate_apb_efuse", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 21),
> + SG2042_GATE(GATE_CLK_APB_GPIO, "clk_gate_apb_gpio", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 22),
> + SG2042_GATE(GATE_CLK_APB_GPIO_INTR,
> + "clk_gate_apb_gpio_intr", "clk_div_top_axi0",
> + CLK_IS_CRITICAL, R_CLKENREG0, 23),
> + SG2042_GATE(GATE_CLK_APB_I2C, "clk_gate_apb_i2c", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 26),
> + SG2042_GATE(GATE_CLK_APB_WDT, "clk_gate_apb_wdt", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 27),
> + SG2042_GATE(GATE_CLK_APB_PWM, "clk_gate_apb_pwm", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 28),
> + SG2042_GATE(GATE_CLK_APB_RTC, "clk_gate_apb_rtc", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 29),
> + SG2042_GATE(GATE_CLK_TOP_AXI0, "clk_gate_top_axi0", "clk_div_top_axi0",
> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> + R_CLKENREG1, 11),
> + /* downstream of DIV clocks which are sourced from clk_div_top_axi0 */
> + SG2042_GATE(GATE_CLK_GPIO_DB, "clk_gate_gpio_db", "clk_div_gpio_db",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 24),
> + SG2042_GATE(GATE_CLK_100K_EMMC, "clk_gate_100k_emmc", "clk_div_100k_emmc",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 4),
> + SG2042_GATE(GATE_CLK_100K_SD, "clk_gate_100k_sd", "clk_div_100k_sd",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 7),
> +
> + /* downstream of clk_div_top_axi_hsperi */
> + SG2042_GATE(GATE_CLK_SYSDMA_AXI,
> + "clk_gate_sysdma_axi", "clk_div_top_axi_hsperi",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 3),
> + SG2042_GATE(GATE_CLK_APB_UART,
> + "clk_gate_apb_uart", "clk_div_top_axi_hsperi",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 5),
> + SG2042_GATE(GATE_CLK_AXI_DBG_I2C,
> + "clk_gate_axi_dbg_i2c", "clk_div_top_axi_hsperi",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 6),
> + SG2042_GATE(GATE_CLK_APB_SPI,
> + "clk_gate_apb_spi", "clk_div_top_axi_hsperi",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 25),
> + SG2042_GATE(GATE_CLK_AXI_ETH0,
> + "clk_gate_axi_eth0", "clk_div_top_axi_hsperi",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 31),
> + SG2042_GATE(GATE_CLK_AXI_EMMC,
> + "clk_gate_axi_emmc", "clk_div_top_axi_hsperi",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 2),
> + SG2042_GATE(GATE_CLK_AXI_SD,
> + "clk_gate_axi_sd", "clk_div_top_axi_hsperi",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 5),
> + SG2042_GATE(GATE_CLK_TOP_AXI_HSPERI,
> + "clk_gate_top_axi_hsperi", "clk_div_top_axi_hsperi",
> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> + R_CLKENREG1, 12),
> +};
> +
> +/*
> + * Gate clocks for RP subsystem (including the MP subsystem), which control
> + * registers are defined in SYS_CTRL.
> + */
> +static const struct sg2042_gate_clock sg2042_gate_rp[] = {
> + /* downstream of clk_gate_rp_cpu_normal about rxu */
> + SG2042_GATE(GATE_CLK_RXU0, "clk_gate_rxu0", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 0),
> + SG2042_GATE(GATE_CLK_RXU1, "clk_gate_rxu1", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 1),
> + SG2042_GATE(GATE_CLK_RXU2, "clk_gate_rxu2", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 2),
> + SG2042_GATE(GATE_CLK_RXU3, "clk_gate_rxu3", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 3),
> + SG2042_GATE(GATE_CLK_RXU4, "clk_gate_rxu4", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 4),
> + SG2042_GATE(GATE_CLK_RXU5, "clk_gate_rxu5", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 5),
> + SG2042_GATE(GATE_CLK_RXU6, "clk_gate_rxu6", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 6),
> + SG2042_GATE(GATE_CLK_RXU7, "clk_gate_rxu7", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 7),
> + SG2042_GATE(GATE_CLK_RXU8, "clk_gate_rxu8", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 8),
> + SG2042_GATE(GATE_CLK_RXU9, "clk_gate_rxu9", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 9),
> + SG2042_GATE(GATE_CLK_RXU10, "clk_gate_rxu10", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 10),
> + SG2042_GATE(GATE_CLK_RXU11, "clk_gate_rxu11", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 11),
> + SG2042_GATE(GATE_CLK_RXU12, "clk_gate_rxu12", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 12),
> + SG2042_GATE(GATE_CLK_RXU13, "clk_gate_rxu13", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 13),
> + SG2042_GATE(GATE_CLK_RXU14, "clk_gate_rxu14", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 14),
> + SG2042_GATE(GATE_CLK_RXU15, "clk_gate_rxu15", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 15),
> + SG2042_GATE(GATE_CLK_RXU16, "clk_gate_rxu16", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 16),
> + SG2042_GATE(GATE_CLK_RXU17, "clk_gate_rxu17", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 17),
> + SG2042_GATE(GATE_CLK_RXU18, "clk_gate_rxu18", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 18),
> + SG2042_GATE(GATE_CLK_RXU19, "clk_gate_rxu19", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 19),
> + SG2042_GATE(GATE_CLK_RXU20, "clk_gate_rxu20", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 20),
> + SG2042_GATE(GATE_CLK_RXU21, "clk_gate_rxu21", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 21),
> + SG2042_GATE(GATE_CLK_RXU22, "clk_gate_rxu22", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 22),
> + SG2042_GATE(GATE_CLK_RXU23, "clk_gate_rxu23", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 23),
> + SG2042_GATE(GATE_CLK_RXU24, "clk_gate_rxu24", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 24),
> + SG2042_GATE(GATE_CLK_RXU25, "clk_gate_rxu25", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 25),
> + SG2042_GATE(GATE_CLK_RXU26, "clk_gate_rxu26", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 26),
> + SG2042_GATE(GATE_CLK_RXU27, "clk_gate_rxu27", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 27),
> + SG2042_GATE(GATE_CLK_RXU28, "clk_gate_rxu28", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 28),
> + SG2042_GATE(GATE_CLK_RXU29, "clk_gate_rxu29", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 29),
> + SG2042_GATE(GATE_CLK_RXU30, "clk_gate_rxu30", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 30),
> + SG2042_GATE(GATE_CLK_RXU31, "clk_gate_rxu31", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 31),
> +
> + /* downstream of clk_gate_rp_cpu_normal about mp */
> + SG2042_GATE(GATE_CLK_MP0, "clk_gate_mp0", "clk_gate_rp_cpu_normal",
> + CLK_IS_CRITICAL, R_MP0_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP1, "clk_gate_mp1", "clk_gate_rp_cpu_normal",
> + CLK_IS_CRITICAL, R_MP1_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP2, "clk_gate_mp2", "clk_gate_rp_cpu_normal",
> + CLK_IS_CRITICAL, R_MP2_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP3, "clk_gate_mp3", "clk_gate_rp_cpu_normal",
> + CLK_IS_CRITICAL, R_MP3_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP4, "clk_gate_mp4", "clk_gate_rp_cpu_normal",
> + CLK_IS_CRITICAL, R_MP4_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP5, "clk_gate_mp5", "clk_gate_rp_cpu_normal",
> + CLK_IS_CRITICAL, R_MP5_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP6, "clk_gate_mp6", "clk_gate_rp_cpu_normal",
> + CLK_IS_CRITICAL, R_MP6_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP7, "clk_gate_mp7", "clk_gate_rp_cpu_normal",
> + CLK_IS_CRITICAL, R_MP7_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP8, "clk_gate_mp8", "clk_gate_rp_cpu_normal",
> + CLK_IS_CRITICAL, R_MP8_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP9, "clk_gate_mp9", "clk_gate_rp_cpu_normal",
> + CLK_IS_CRITICAL, R_MP9_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP10, "clk_gate_mp10", "clk_gate_rp_cpu_normal",
> + CLK_IS_CRITICAL, R_MP10_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP11, "clk_gate_mp11", "clk_gate_rp_cpu_normal",
> + CLK_IS_CRITICAL, R_MP11_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP12, "clk_gate_mp12", "clk_gate_rp_cpu_normal",
> + CLK_IS_CRITICAL, R_MP12_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP13, "clk_gate_mp13", "clk_gate_rp_cpu_normal",
> + CLK_IS_CRITICAL, R_MP13_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP14, "clk_gate_mp14", "clk_gate_rp_cpu_normal",
> + CLK_IS_CRITICAL, R_MP14_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP15, "clk_gate_mp15", "clk_gate_rp_cpu_normal",
> + CLK_IS_CRITICAL, R_MP15_CONTROL_REG, 0),
> +};
> +
> +#define SG2042_MUX(_id, _name, _parents, _flags, _r_select, _shift, _width) { \
> + .hw.init = CLK_HW_INIT_PARENTS_DATA( \
> + _name, \
> + _parents, \
> + NULL, \
> + _flags), \
> + .id = _id, \
> + .offset_select = _r_select, \
> + .shift = _shift, \
> + .width = _width, \
> + }
> +
> +/*
> + * Note: regarding names for mux clock, "0/1" or "div0/div1" means the
> + * first/second parent input source, not the register value.
> + * For example:
> + * "clk_div_ddr01_0" is the name of Clock divider 0 control of DDR01, and
> + * "clk_gate_ddr01_div0" is the gate clock in front of the "clk_div_ddr01_0",
> + * they are both controlled by register CLKDIVREG27;
> + * "clk_div_ddr01_1" is the name of Clock divider 1 control of DDR01, and
> + * "clk_gate_ddr01_div1" is the gate clock in front of the "clk_div_ddr01_1",
> + * they are both controlled by register CLKDIVREG28;
> + * While for register value of mux selection, use Clock Select for DDR01’s clock
> + * as example, see CLKSELREG0, bit[2].
> + * 1: Select in_dpll0_clk as clock source, correspondng to the parent input
> + * source from "clk_div_ddr01_0".
> + * 0: Select in_fpll_clk as clock source, corresponding to the parent input
> + * source from "clk_div_ddr01_1".
> + * So we need a table to define the array of register values corresponding to
> + * the parent index and tell CCF about this when registering mux clock.
> + */
> +static const u32 sg2042_mux_table[] = {1, 0};
> +
> +static const struct clk_parent_data clk_mux_ddr01_p[] = {
> + { .hw = &sg2042_div_clks[0].hw },
> + { .hw = &sg2042_div_clks[1].hw },
> +};
> +
> +static const struct clk_parent_data clk_mux_ddr23_p[] = {
> + { .hw = &sg2042_div_clks[2].hw },
> + { .hw = &sg2042_div_clks[3].hw },
> +};
> +
> +static const struct clk_parent_data clk_mux_rp_cpu_normal_p[] = {
> + { .hw = &sg2042_div_clks[4].hw },
> + { .hw = &sg2042_div_clks[5].hw },
> +};
> +
> +static const struct clk_parent_data clk_mux_axi_ddr_p[] = {
> + { .hw = &sg2042_div_clks[6].hw },
> + { .hw = &sg2042_div_clks[7].hw },
> +};
> +
> +static struct sg2042_mux_clock sg2042_mux_clks[] = {
> + SG2042_MUX(MUX_CLK_DDR01, "clk_mux_ddr01", clk_mux_ddr01_p,
> + CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT | CLK_MUX_READ_ONLY,
> + R_CLKSELREG0, 2, 1),
> + SG2042_MUX(MUX_CLK_DDR23, "clk_mux_ddr23", clk_mux_ddr23_p,
> + CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT | CLK_MUX_READ_ONLY,
> + R_CLKSELREG0, 3, 1),
> + SG2042_MUX(MUX_CLK_RP_CPU_NORMAL, "clk_mux_rp_cpu_normal", clk_mux_rp_cpu_normal_p,
> + CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> + R_CLKSELREG0, 0, 1),
> + SG2042_MUX(MUX_CLK_AXI_DDR, "clk_mux_axi_ddr", clk_mux_axi_ddr_p,
> + CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> + R_CLKSELREG0, 1, 1),
> +};
> +
> +static DEFINE_SPINLOCK(sg2042_clk_lock);
> +
> +static int sg2042_clk_register_plls(struct device *dev,
> + struct sg2042_clk_data *clk_data,
> + struct sg2042_pll_clock pll_clks[],
> + int num_pll_clks)
> +{
> + struct clk_hw *hw;
> + struct sg2042_pll_clock *pll;
> + int i, ret = 0;
> +
> + for (i = 0; i < num_pll_clks; i++) {
> + pll = &pll_clks[i];
> + /* assign these for ops usage during registration */
> + pll->base = clk_data->iobase;
> + pll->lock = &sg2042_clk_lock;
> +
> + hw = &pll->hw;
> + ret = devm_clk_hw_register(dev, hw);
> + if (ret) {
> + pr_err("failed to register clock %s\n", pll->hw.init->name);
> + break;
> + }
> +
> + clk_data->onecell_data.hws[pll->id] = hw;
> + }
> +
> + /* leave unregister to outside if failed */
> + return ret;
> +}
> +
> +static int sg2042_clk_register_divs(struct device *dev,
> + struct sg2042_clk_data *clk_data,
> + struct sg2042_divider_clock div_clks[],
> + int num_div_clks)
> +{
> + struct clk_hw *hw;
> + struct sg2042_divider_clock *div;
> + int i, ret = 0;
> +
> + for (i = 0; i < num_div_clks; i++) {
> + div = &div_clks[i];
> +
> + if (div->div_flags & CLK_DIVIDER_HIWORD_MASK) {
> + if (div->width + div->shift > 16) {
> + pr_warn("divider value exceeds LOWORD field\n");
> + ret = -EINVAL;
> + break;
> + }
> + }
> +
> + div->reg = clk_data->iobase + div->offset_ctrl;
> + div->lock = &sg2042_clk_lock;
> +
> + hw = &div->hw;
> + ret = devm_clk_hw_register(dev, hw);
> + if (ret) {
> + pr_err("failed to register clock %s\n", div->hw.init->name);
> + break;
> + }
> +
> + clk_data->onecell_data.hws[div->id] = hw;
> + }
> +
> + /* leave unregister to outside if failed */
> + return ret;
> +}
> +
> +static int sg2042_clk_register_gates(struct device *dev,
> + struct sg2042_clk_data *clk_data,
> + const struct sg2042_gate_clock gate_clks[],
> + int num_gate_clks)
> +{
> + struct clk_hw *hw;
> + const struct sg2042_gate_clock *gate;
> + int i, ret = 0;
> +
> + for (i = 0; i < num_gate_clks; i++) {
> + gate = &gate_clks[i];
> + hw = devm_clk_hw_register_gate(dev,
> + gate->hw.init->name,
> + gate->hw.init->parent_names[0],
> + gate->hw.init->flags,
> + clk_data->iobase + gate->offset_enable,
> + gate->bit_idx,
> + 0,
> + &sg2042_clk_lock);
> + if (IS_ERR(hw)) {
> + pr_err("failed to register clock %s\n", gate->hw.init->name);
> + ret = PTR_ERR(hw);
> + break;
> + }
> +
> + clk_data->onecell_data.hws[gate->id] = hw;
> + }
> +
> + /* leave unregister to outside if failed */
> + return ret;
> +}
> +
> +static int sg2042_mux_notifier_cb(struct notifier_block *nb,
> + unsigned long event,
> + void *data)
> +{
> + int ret = 0;
> + struct clk_notifier_data *ndata = data;
> + struct clk_hw *hw = __clk_get_hw(ndata->clk);
> + const struct clk_ops *ops = &clk_mux_ops;
> + struct sg2042_mux_clock *mux = to_sg2042_mux_nb(nb);
> +
> + /* To switch to fpll before changing rate and restore after that */
> + if (event == PRE_RATE_CHANGE) {
> + mux->original_index = ops->get_parent(hw);
> +
> + /*
> + * "1" is the array index of the second parent input source of
> + * mux. For SG2042, it's fpll for all mux clocks.
> + * "0" is the array index of the frist parent input source of
> + * mux, For SG2042, it's mpll.
> + * FIXME, any good idea to avoid magic number?
> + */
> + if (mux->original_index == 0)
> + ret = ops->set_parent(hw, 1);
> + } else if (event == POST_RATE_CHANGE) {
> + ret = ops->set_parent(hw, mux->original_index);
> + }
> +
> + return notifier_from_errno(ret);
> +}
> +
> +static int sg2042_clk_register_muxs(struct device *dev,
> + struct sg2042_clk_data *clk_data,
> + struct sg2042_mux_clock mux_clks[],
> + int num_mux_clks)
> +{
> + struct clk_hw *hw;
> + struct sg2042_mux_clock *mux;
> + int i, ret = 0;
> +
> + for (i = 0; i < num_mux_clks; i++) {
> + mux = &mux_clks[i];
> +
> + hw = devm_clk_hw_register_mux_parent_data_table
> + (dev,
> + mux->hw.init->name,
> + mux->hw.init->parent_data,
> + mux->hw.init->num_parents,
> + mux->hw.init->flags,
> + clk_data->iobase + mux->offset_select,
> + mux->shift,
> + mux->width,
> + 0,
> + sg2042_mux_table,
> + &sg2042_clk_lock);
> + if (IS_ERR(hw)) {
> + pr_err("failed to register clock %s\n", mux->hw.init->name);
> + ret = PTR_ERR(hw);
> + break;
> + }
> +
> + clk_data->onecell_data.hws[mux->id] = hw;
> +
> + /*
> + * FIXME: Theoretically, we should set parent for the
> + * mux, but seems hardware has done this for us with
> + * default value, so we don't set parent again here.
> + */
> +
> + if (!(mux->hw.init->flags & CLK_MUX_READ_ONLY)) {
> + mux->clk_nb.notifier_call = sg2042_mux_notifier_cb;
> + ret = clk_notifier_register(hw->clk, &mux->clk_nb);
> + if (ret) {
> + pr_err("failed to register clock notifier for %s\n",
> + mux->hw.init->name);
> + goto error_cleanup;
> + }
> + }
> + }
> +
> + return 0;
> +
> +error_cleanup:
> + /* unregister notifier and release the memory allocated */
> + for (i = 0; i < num_mux_clks; i++) {
> + mux = &mux_clks[i];
> +
> + hw = clk_data->onecell_data.hws[mux->id];
> +
> + if (hw)
> + clk_notifier_unregister(hw->clk, &mux->clk_nb);
> + }
> +
> + /* leave clk unregister to outside if failed */
> + return ret;
> +}
> +
> +static int sg2042_init_clkdata(struct platform_device *pdev,
> + int num_clks,
> + struct sg2042_clk_data **pp_clk_data)
> +{
> + struct sg2042_clk_data *clk_data = NULL;
> +
> + clk_data = devm_kzalloc(&pdev->dev,
> + struct_size(clk_data, onecell_data.hws, num_clks),
> + GFP_KERNEL);
> + if (!clk_data)
> + return -ENOMEM;
> +
> + clk_data->iobase = devm_platform_ioremap_resource(pdev, 0);
> + if (WARN_ON(IS_ERR(clk_data->iobase)))
> + return PTR_ERR(clk_data->iobase);
> +
> + clk_data->onecell_data.num = num_clks;
> +
> + *pp_clk_data = clk_data;
> +
> + return 0;
> +}
> +
> +static int sg2042_clkgen_probe(struct platform_device *pdev)
> +{
> + struct sg2042_clk_data *clk_data = NULL;
> + int i, ret = 0;
> + int num_clks = 0;
> +
> + num_clks = ARRAY_SIZE(sg2042_div_clks) +
> + ARRAY_SIZE(sg2042_gate_clks) +
> + ARRAY_SIZE(sg2042_mux_clks);
> +
> + ret = sg2042_init_clkdata(pdev, num_clks, &clk_data);
> + if (ret < 0)
> + goto error_out;
> +
> + ret = sg2042_clk_register_divs(&pdev->dev, clk_data, sg2042_div_clks,
> + ARRAY_SIZE(sg2042_div_clks));
> + if (ret)
> + goto cleanup;
> +
> + ret = sg2042_clk_register_gates(&pdev->dev, clk_data, sg2042_gate_clks,
> + ARRAY_SIZE(sg2042_gate_clks));
> + if (ret)
> + goto cleanup;
> +
> + ret = sg2042_clk_register_muxs(&pdev->dev, clk_data, sg2042_mux_clks,
> + ARRAY_SIZE(sg2042_mux_clks));
> + if (ret)
> + goto cleanup;
> +
> + return devm_of_clk_add_hw_provider(&pdev->dev,
> + of_clk_hw_onecell_get,
> + &clk_data->onecell_data);
> +
> +cleanup:
> + for (i = 0; i < num_clks; i++) {
> + if (clk_data->onecell_data.hws[i])
> + clk_hw_unregister(clk_data->onecell_data.hws[i]);
> + }
> +
> +error_out:
> + pr_err("%s failed error number %d\n", __func__, ret);
> + return ret;
> +}
> +
> +static int sg2042_rpgate_probe(struct platform_device *pdev)
> +{
> + struct sg2042_clk_data *clk_data = NULL;
> + int i, ret = 0;
> + int num_clks = 0;
> +
> + num_clks = ARRAY_SIZE(sg2042_gate_rp);
> +
> + ret = sg2042_init_clkdata(pdev, num_clks, &clk_data);
> + if (ret < 0)
> + goto error_out;
> +
> + ret = sg2042_clk_register_gates(&pdev->dev, clk_data, sg2042_gate_rp,
> + num_clks);
> + if (ret)
> + goto cleanup;
> +
> + return devm_of_clk_add_hw_provider(&pdev->dev,
> + of_clk_hw_onecell_get,
> + &clk_data->onecell_data);
> +
> +cleanup:
> + for (i = 0; i < num_clks; i++) {
> + if (clk_data->onecell_data.hws[i])
> + clk_hw_unregister(clk_data->onecell_data.hws[i]);
> + }
> +
> +error_out:
> + pr_err("%s failed error number %d\n", __func__, ret);
> + return ret;
> +}
> +
> +static int sg2042_pll_probe(struct platform_device *pdev)
> +{
> + struct sg2042_clk_data *clk_data = NULL;
> + int i, ret = 0;
> + int num_clks = 0;
> +
> + num_clks = ARRAY_SIZE(sg2042_pll_clks);
> +
> + ret = sg2042_init_clkdata(pdev, num_clks, &clk_data);
> + if (ret < 0)
> + goto error_out;
> +
> + ret = sg2042_clk_register_plls(&pdev->dev, clk_data, sg2042_pll_clks,
> + num_clks);
> + if (ret)
> + goto cleanup;
> +
> + return devm_of_clk_add_hw_provider(&pdev->dev,
> + of_clk_hw_onecell_get,
> + &clk_data->onecell_data);
> +
> +cleanup:
> + for (i = 0; i < num_clks; i++) {
> + if (clk_data->onecell_data.hws[i])
> + clk_hw_unregister(clk_data->onecell_data.hws[i]);
> + }
> +
> +error_out:
> + pr_err("%s failed error number %d\n", __func__, ret);
> + return ret;
> +}
> +
> +static const struct of_device_id sg2042_clkgen_match[] = {
> + { .compatible = "sophgo,sg2042-clkgen" },
> + { /* sentinel */ }
> +};
> +
> +static struct platform_driver sg2042_clkgen_driver = {
> + .probe = sg2042_clkgen_probe,
> + .driver = {
> + .name = "clk-sophgo-sg2042-clkgen",
> + .of_match_table = sg2042_clkgen_match,
> + .suppress_bind_attrs = true,
> + },
> +};
> +builtin_platform_driver(sg2042_clkgen_driver);
> +
> +static const struct of_device_id sg2042_rpgate_match[] = {
> + { .compatible = "sophgo,sg2042-rpgate" },
> + { /* sentinel */ }
> +};
> +
> +static struct platform_driver sg2042_rpgate_driver = {
> + .probe = sg2042_rpgate_probe,
> + .driver = {
> + .name = "clk-sophgo-sg2042-rpgate",
> + .of_match_table = sg2042_rpgate_match,
> + .suppress_bind_attrs = true,
> + },
> +};
> +builtin_platform_driver(sg2042_rpgate_driver);
> +
> +static const struct of_device_id sg2042_pll_match[] = {
> + { .compatible = "sophgo,sg2042-pll" },
> + { /* sentinel */ }
> +};
> +
> +static struct platform_driver sg2042_pll_driver = {
> + .probe = sg2042_pll_probe,
> + .driver = {
> + .name = "clk-sophgo-sg2042-pll",
> + .of_match_table = sg2042_pll_match,
> + .suppress_bind_attrs = true,
> + },
> +};
> +builtin_platform_driver(sg2042_pll_driver);
More information about the linux-riscv
mailing list